Ear Muffs and Safety Glasses for the Shop
Ear muffs rated NRR 28 and ANSI Z87.1 safety glasses cover hearing and eyes in the shop, and NRR 33 earplugs under the muffs give a combined NRR 38.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Hearing Protection Noise Cancelling Ear Muffs for Hard Hat9.7/10View on Amazon - 2
DECIBEL DEFENSE Ear Protection9.7/10View on Amazon - 3
ProCase Hearing Protection Ear Muffs SNR 33dB9.6/10View on Amazon
A grinder throws sparks and chips, a saw screams through steel, and a hammer rings on the anvil. Ear muffs and safety glasses are the pair that covers hearing and eyes through all of it: muffs sit over the ears, glasses sit over the eyes, and the pair is made to be worn together. This guide explains what each piece does, what the figures on the box mean, and how to wear them so they stay comfortable through a long session in the shop.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
What ear muffs and safety glasses do in the shop
The muffs cut the noise of grinders, saws and hammers, and the glasses stop chips and sparks from reaching the eyes. Neither piece replaces the other: muffs do nothing for the eyes, and glasses do nothing for hearing. In a welding shop the glasses also sit under the helmet when you grind or chip slag, so eye protection stays on when the helmet comes up.
Side by side
| Ear muffs | Safety glasses | Worn together | |
|---|---|---|---|
| What it protects | Hearing | Eyes | Hearing and eyes |
| Figure to check | NRR 28 | ANSI Z87.1 | NRR 28 and ANSI Z87.1 |
| Doubling up | Add NRR 33 foam earplugs for a combined NRR 38 | Glasses stay on under the muffs | Muffs, plugs and glasses together |
| Fit | Padded headband adjusts 7.2 to 7.7 inches | Fit over most standard prescription glasses | Glass arms sit beneath soft cushions |
| Lens | No lens | Anti-fog, anti-scratch, UV400 | Anti-fog, anti-scratch, UV400 |
| Extras in the kit | 5 pairs of NRR 33 foam earplugs | Microfiber pouch for each pair | Hard case stores the full kit |
| Coverage | Earmuffs covered for 10 years | Safety glasses covered for 2 years | 10 years on muffs, 2 years on glasses |
The table shows the split: muffs cover hearing, glasses cover eyes, and the kit that holds both covers hearing and eyes together. The figures to compare are the NRR on the muffs and the ANSI Z87.1 mark on the glasses.
How much hearing protection do you need
TradeSmart lists NRR 28 muffs and NRR 33 foam earplugs, and a combined NRR 38 when you wear the plugs under the muffs, using the standard +5 dB field rule. The muffs on their own suit ordinary shop noise, and the plugs underneath add protection for louder work. The kit holds 5 pairs of foam earplugs, so spares stay in the case. See our how to use ear plugs guide for fitting plugs under muffs.
What to look for in safety glasses
Look for the ANSI Z87.1 mark on the glasses: the kits here list anti-fog ANSI Z87.1 safety glasses with a pouch. The lenses are anti-fog, anti-scratch and UV400, which keeps them clear through a session and blocks ultraviolet light. The muffs fit over most standard prescription glasses, so wearers who need prescription lenses can keep them on under the muffs. See our best anti-fog safety glasses guide and the safety glass standard guide for what the marks mean.
Wearing muffs and glasses together
The fit works when the glass arms sit beneath the soft cushions, so the glasses stay put, but the arms pass under the cushions and can break the seal around the ears. The padded headband adjusts from 7.2 to 7.7 inches, and the soft ear cushions and deep cups leave room around the ears. The muffs fold down for storage, and the hard case keeps the full kit together. Check the fit before each session: the headband should sit level, the cushions should seal around the ears, and the glasses should sit square on the face.
How long the gear lasts
TradeSmart covers the earmuffs for 10 years and the safety glasses for 2 years against manufacturing defects. That cover is for defects, not for wear: cushions harden with use, headbands lose their spring, and lenses pick up scratches that cloud the view. Replace a piece when it no longer seals, fits or stays clear, and keep the kit in its case between sessions so the lenses and cushions stay clean.
Grinding dust and chips. Grinding and chipping throw hot chips and dust toward the face, so wear safety glasses under the helmet and keep the muffs on through the whole job. A respirator suits dusty work such as grinding and sandblasting, and ventilation keeps the air clear. Check the hose and fittings on air tools before each session, and keep the bench clear of anything flammable. See the OSHA welding overview and our Safety Disclaimer.
FAQ for welders
Can I wear safety glasses with ear muffs?
Yes. The glass arms sit beneath the soft cushions, so the glasses stay put with the muffs on, but the arms can break the seal around the ears, so check the fit. The muffs also fit over most standard prescription glasses, so you can wear your prescription pair under the muffs.
What does NRR 28 mean on ear muffs?
NRR 28 is the figure TradeSmart lists for its muffs. Wear the muffs on their own for ordinary shop noise, or add NRR 33 foam earplugs underneath for a combined NRR 38, using the standard +5 dB field rule. A higher NRR means more noise reduction on the label.
Do safety glasses need to be ANSI Z87.1?
Look for the ANSI Z87.1 mark: the glasses in these kits carry it, with anti-fog, anti-scratch and UV400 lenses. The mark shows the glasses meet the impact standard the shop expects, so check for it before you buy.
How do I keep safety glasses from fogging?
Pick lenses with an anti-fog coating, like the anti-fog lenses in these kits. Keep the lenses clean, and store the glasses in their pouch between sessions so the coating stays intact.
How long do ear muffs and safety glasses last?
TradeSmart covers the earmuffs for 10 years and the safety glasses for 2 years against manufacturing defects. Replace the muffs when the cushions no longer seal or the headband no longer holds, and replace the glasses when the lenses scratch or the arms loosen.
Related: welding safety gear, safety goggles for welding, angle grinder safety, and the safety glasses XL fit guide.




