Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Shade 5 vs Shade 8 Welding Goggles: Which One Should You Buy?

A shade 5 glasses example and a goggle listing that states shade 5 show why checking the shade marking on the lens matters before buying.

Shade 5 vs Shade 8 Welding Goggles: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Hobart 770727 Shade 5 Lens Safety Glasses, OrangeHobart 770727 Shade 5 Lens Safety Glasses, Orange9.6/10View on Amazon
  2. 2KwikSafety - Charlotte, NCKwikSafety - Charlotte, NC9.4/10View on Amazon

Verdict. In this shade 5 vs shade 8 welding goggles comparison, the Hobart shade 5 glasses are the clearer pick, with a shade number stated in the title and bullets, a named standard, and a scratch resistant coating. The KwikSafety goggles are the sealed option with an anti-fog coating and an adjustable elastic band, but their listing states shade 5, so they do not settle the shade 8 side of this comparison. Pick the Hobart example for the documented shade 5 lens; pick the KwikSafety goggles only after checking the shade marking on arrival.

A torch job leaves little room for guessing about eye protection. Cutting, brazing, and heating work throws sparks and bright light at the eyes, and the shade in front of them decides how much light gets through. This shade 5 vs shade 8 welding goggles comparison looks at both listings: a shade 5 glasses example and a goggle listing whose own fields state shade 5. Only one shade number is actually confirmed across both listings.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

The two eye protection picks

Hobart 770727 Shade 5 Lens Safety Glasses, Orange

Hobart 770727 Shade 5 Lens Safety Glasses, Orange

Hobart9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Shade 5 safety glasses with form-fitting frames, polycarbonate lenses listed as shatter resistant, a scratch resistant coating, and an ANSI Z87.1 claim.

Pros

  • Shade 5 lenses stated in the title and bullets
  • Meets ANSI Z87.1 standards, per the listing
  • Polycarbonate lenses the listing calls shatter resistant, with a scratch resistant coating
  • Form-fitting frames in a one-size fit

Cons

  • Glasses form, not sealed goggles, so the sides stay open
  • No warranty term is stated
  • No anti-fog coating is stated
  • Package holds 1 pair, with no spare lens stated
KwikSafety - Charlotte, NC

KwikSafety - Charlotte, NC

KwikSafety9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Welding goggles with an elastic band, anti-fog coating, and self-tightening fit, sold as a 2-pack, whose own listing states shade 5.

Pros

  • Sealed goggle form with an elastic band and adjustable fit
  • Anti-fog coating stated in the listing
  • Self-tightening feature and 1 pressure equalizer stated
  • Sold as a 2-pack, so a spare pair is in the package

Cons

  • Listing states shade 5, so it does not confirm a shade 8 lens
  • No warranty term is stated
  • No ANSI Z87.1 standard number stated; listing gives general compliance claims only
  • Bullets are blank, so use details come only from the specification table

Other welders and gear to compare

Side by side

Hobart 770727 Shade 5 Lens Safety Glasses KwikSafety Black Welding Goggles Shop Takeaway
Form Safety glasses Safety goggles Glasses for simple wear; goggles for sealed coverage
Shade stated Shade 5 Shade 5 in listing fields, not shade 8 Only shade 5 is confirmed here
Lens material Polycarbonate Polyvinyl Chloride Both materials stated in the listings
Coating Scratch resistant Anti-fog Scratch resistance against anti-fog
Frame Polycarbonate (PC) Polyvinyl Chloride (PVC) Polycarbonate against polyvinyl chloride
Fit One Size, form-fitting frames Adjustable, elastic band Fixed fit against an adjustable band
Standard ANSI Z87.1 ANSI and OSHA claims stated, no standard number Named standard against general claims
Pack 1 pair 2-pack 1 pair against a 2-pack
Warranty Not stated Not stated Neither states a term

These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 29 October 2026. Neither listing states a concrete warranty term, and only the Hobart listing names a specific eye protection standard. The KwikSafety listing gives more on fit and coatings, while the Hobart listing gives more on shade and standard.

Shade 5 vs shade 8 welding goggles: what separates the two sides

A higher shade number means less light reaches the eye, so the shade number is the main thing to confirm before buying. The Hobart listing states shade 5 in its title and bullets, which makes its side straightforward. The KwikSafety listing states no shade number in its title, and its bullets are blank, so its side rests on specification fields that read shade 5. That leaves this comparison with a confirmed shade 5 example on both sides and no confirmed shade 8 example at all.

That matters because a reader shopping for a shade 8 lens cannot use the KwikSafety listing as proof of what shade 8 looks like in use. The listing names torch work among its uses, including oxy-fuel welding, oxygen cutting, torch brazing, and torch soldering, but it never ties those uses to a shade number, so the shade 8 side stays unproven here.

Form: glasses against goggles

The Hobart example is safety glasses with form-fitting frames, while the KwikSafety example is safety goggles with a full rim and an elastic band. Glasses sit on the face like ordinary eyewear, which keeps them easy to put on, but leaves the sides open. Goggles seal around the eyes, which suits work where sparks and debris come from more than one direction. Form is a fit and coverage choice, not a shade choice.

The KwikSafety goggles add an adjustable fit and a self-tightening feature, plus 1 pressure equalizer in the listing. The Hobart glasses use a one-size fit with form-fitting frames and no band to adjust. A reader who shares eye protection across a shop has more fit adjustment in the goggle listing. A reader who wants the simplest thing to grab and wear has less to adjust in the glasses listing.

Lens coatings and fit

Coatings split the two listings cleanly. The Hobart lenses carry a scratch resistant coating over polycarbonate listed as shatter resistant, which suits glasses that get wiped down often. The KwikSafety lenses carry an anti-fog coating, which suits goggles that seal against the face and can fog during torch work. Neither listing states the other coating, so a reader cannot assume scratch resistance on the goggles or anti-fog on the glasses.

Materials differ too. The Hobart listing names polycarbonate for its frames and lenses. The KwikSafety listing names polyvinyl chloride for its frame and lenses, with thermoplastic rubber in the materials field. Its care instructions say to clean with mild soap and water, dry with a soft cloth, and store in a cool dry place away from direct sunlight and heat. See our welding safety gear checklist for beginners before stocking a torch station.

The shade marking problem

The KwikSafety listing deserves a close read before anyone buys it as a shade 8 lens. Its title names brazing and flame cutting eye protection but gives no shade number. Its bullets are blank, so they confirm nothing either. Its color field and its shade field both read shade 5. Trusting the title and bullets over the specification table still leaves no shade 8 claim standing, because the title and bullets state no shade at all.

The practical fix is simple: check the shade marking printed on the lens when the goggles arrive, and match it against the shade you planned to buy. If the marking reads shade 5, treat the pair as a shade 5 goggle. The Hobart example needs no such check, because its title and bullets agree on shade 5.

Choose the Hobart 770727 Shade 5 Lens Safety Glasses if

  • You want a shade number stated in the title and bullets, not just in a specification field.
  • You want a named standard, ANSI Z87.1, in the listing.
  • You want scratch resistant polycarbonate lenses in a form-fitting frame.
  • You accept a glasses form rather than sealed goggles.

Choose the KwikSafety Black Welding Goggles if

  • You want sealed goggles with an elastic band and an adjustable fit.
  • You want an anti-fog coating for torch work.
  • You want a 2-pack rather than a single pair.
  • You check the shade marking on arrival and accept that the listing states shade 5.

Before You Strike an Arc

  • Check the shade marking printed on the lens on arrival, and match it to the shade you planned to buy.
  • Set the elastic band or frames for a snug fit before striking the torch, and confirm the goggles seal without pressing hard.
  • Clean lenses with mild soap and water, dry with a soft cloth, and store away from direct sunlight and heat.
  • Check the anti-fog coating and the pressure equalizer on arrival, and keep gloves and flame resistant clothing on for torch work.

FAQ for welders

Can shade 5 goggles handle torch brazing?

The listings do not tie a shade number to a process, so no listing here answers that question directly. The KwikSafety listing names torch brazing, torch soldering, oxy-fuel welding, and oxygen cutting among its uses, while stating shade 5 in its fields. Match the shade marking on the lens to the work you plan before buying.

Are the KwikSafety goggles really shade 8?

Not on the listing’s own words. The title states no shade number, the bullets are blank, and the color field and shade field both read shade 5. Treat this pair as a shade 5 goggle unless the lens marking says otherwise.

Do safety glasses protect as well as sealed goggles?

The listings describe different forms, not equal coverage. Glasses with form-fitting frames leave the sides open, while goggles with a full rim and elastic band seal around the eyes. Choose the form by how much spark and debris reaches the eyes from the sides.

What does ANSI Z87.1 mean on the Hobart glasses?

The Hobart listing states that the glasses meet ANSI Z87.1 standards. The KwikSafety listing claims ANSI and OSHA compliance without naming a standard number, so its claim is harder to check.

Which pick has a warranty?

Neither listing states a concrete warranty term. The Hobart listing states no warranty at all, and the KwikSafety listing only points to warranty information without giving a term.

Related: welding goggles vs safety glasses, best welding goggles for brazing, variable shade vs fixed shade welding lens, and the welding safety gear hub. Also see our welding helmet vs welding goggles.

Scoring, line by line

Both picks are scored on performance, build, value, safety listing and warranty, with the weights described on the How We Pick page. The Hobart example scores higher because its shade, standard, and coating are all stated plainly in its title and bullets. The KwikSafety example scores lower because its shade claim does not hold up across its own listing.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Hobart 770727 Shade 5 Lens Safety Glasses 9.6 29 21 20 8 0
KwikSafety Black Welding Goggles 9.4 24 19 20 5 0

Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score.

More buying guides