Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Pilot Arc vs High Frequency Plasma Cutter: Which One Should You Buy?

Pilot arc vs high frequency plasma cutter: a 60A blow-back pilot arc machine against a 40A HF torch head, compared on arc starting, thickness and duty.

Pilot Arc vs High Frequency Plasma Cutter: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Bestarc 60A Non-HF Plasma CutterBestarc 60A Non-HF Plasma Cutter9.6/10View on Amazon
  2. 2PT31 Air Plasma Cutting Torch Head BodyPT31 Air Plasma Cutting Torch Head Body9.4/10View on Amazon

Verdict. Pick the pilot arc side, represented here by the 60A Bestarc CUT60XP, if you want a complete dual-voltage machine whose blow-back start avoids HF signal interference. Pick the high frequency side, represented here by the 40A PT31 torch head, if you are re-equipping a 40 to 50A machine and want a rated HF torch with consumables in the box. Note the mismatch in this pairing: 1 side is a full cutter, the other a torch head.

Pilot arc vs high frequency plasma cutter is the choice between the 2 ways to start a plasma arc, and it matters for interference, consumable life and what you are actually buying. This comparison puts a blow-back pilot arc machine, the Bestarc CUT60XP, against a high frequency torch head, the PT31, on what each listing states.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

The 2 examples

Bestarc 60A Non-HF Plasma Cutter

Bestarc 60A Non-HF Plasma Cutter

bestarc9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 60A dual-voltage plasma cutter with blow-back pilot arc, 5/8 in clean cut per the title and air sensor technology.

Pros

  • 60A output on dual voltage 110/220V
  • Blow-back pilot arc avoids HF signal interference, per the listing
  • Air sensor with LED display of pressure, voltage and current
  • 2T/4T modes, post flow 3-15 s and PA timing to 15 s

Cons

  • No warranty term is stated
  • Title says 5/8 in clean cut, bullets say 1/2 in
  • 17.56 lb plus compressor and 220V needs for full output
  • No CSA, UL or ETL listing is stated
PT31 Air Plasma Cutting Torch Head Body

PT31 Air Plasma Cutting Torch Head Body

Welding Knight9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A high frequency plasma torch head rated 40A with electrode, tip, swirl ring and shield cup in the box.

Pros

  • Rated 40A with 60% duty at 40A, 100% at 20A
  • Consumables included: electrode, tip, swirl ring, shield cup
  • Fits a long list of 40 and 50A machines
  • 168 g ergonomic red handle

Cons

  • No warranty term is stated
  • A torch head, not a complete cutter
  • Stated cutting thickness only 12 mm or less
  • No interference or certification claims stated

Other welders and gear to compare

Side by side

Example Gear Score Side Rated current Cut thickness Weight Warranty (stated)
Bestarc CUT60XP 60A 9.6/10 Pilot arc 60A 5/8 in clean / 4/5 in max (title) 17.56 lb Not stated
PT31 Torch Head 40A 9.4/10 High frequency 40A 12 mm or less 168 g Not stated

All specs here repeat what the maker rates and the listing prints, copied down 18 October 2026. These are different product types: the Bestarc is a complete 60A plasma cutter, the PT31 a 40A torch head. Neither listing states a warranty term or a CSA, UL or ETL listing.

Pilot arc vs high frequency plasma cutter: arc starting compared

The Bestarc uses blow-back pilot arc technology, which the listing says initiates the arc without touching the metal. Because it is non-high-frequency, the listing says it prevents HF signal interference and improves cutting stability, and the low-frequency arc maintenance reduces electrode burn during non-cutting, extending electrode and nozzle life. The PT31 is a high frequency torch head rated at 40A. High frequency start is the older approach the Bestarc listing positions itself against; the PT31 listing states no interference claims either way.

Power and output

The Bestarc is a 60A machine on dual voltage 110/220V, with a stated 12000 watts. The breaker guidance is up to 40A at 110V/35A and up to 30A at 220V/60A. The PT31 is a torch head rated at 40A, with a stated duty cycle of 60% at 40A and 100% at 20A; it fits 40 and 50A machines such as the CUT-40, CUT-40D and LGK-40. These are not directly comparable outputs: 1 is the machine’s rating, the other the torch’s.

Rated thickness

The Bestarc title claims 5/8 in clean cut and 4/5 in max cut, while the bullets claim 1/2 in clean cuts on iron, steel, aluminum and copper; the detailed recommendation is 9/16 in (14 mm) at 35A/110V/50 PSI and 4/5 in (20 mm) at 60A/220V/65 PSI. We note the clean-cut mismatch and follow the detailed figures. The PT31 states high frequency cutting thickness of 12 mm or less. Both sides state a thickness figure, but for different product types.

Weight and build

The Bestarc lists 17.56 lb and 12.05 x 5.12 x 8.07 in for the machine. The PT31 lists 168 g for the torch head body in copper with a red handle. Comparing them is meaningless beyond noting that the torch is a hand-held part and the Bestarc a shop machine.

What is in the box

The Bestarc includes the plasma cutting torch with a built-in regulator, air sensor and 1/4 NPT quick-connect air fitting. The PT31 package includes the torch handle, a long electrode, a long tip, a swirl ring and a shield cup. The Bestarc adds machine-side features the torch cannot: an LED screen showing air pressure, voltage and current with error codes, 2T/4T trigger modes, post flow adjustable from 3 to 15 s, and PA pilot arc timing adjustable up to 15 s.

Warranty

Neither listing states a warranty term, so warranty scores zero on both sides.

Choose the pilot arc side if

  • You want a complete cutter: 60A, dual voltage 110/220V, with torch included.
  • HF interference is a concern: the Bestarc listing says its non-HF pilot arc prevents HF signal interference.
  • You cut mesh or expanded metal: the PA function adjusts pilot arc timing up to 15 s, with longer times stated as ideal for mesh cutting.
  • You want machine feedback: LED display of air pressure, voltage and current, plus error codes.

Choose the high frequency side if

  • You already own a 40 to 50A plasma machine and need a rated HF torch head for it.
  • You want consumables in the box: electrode, tip, swirl ring and shield cup are included.
  • You want a light hand piece: 168 g with an ergonomic red handle.
  • Your work is within 12 mm thickness, the PT31’s stated HF cutting limit.

Buying advice: matching the arc start to your shop

Start from what you already own. If you have a 40 to 50A plasma machine and need a new torch, the PT31 example is a rated HF torch head for exactly that: 40A rated current, a stated duty cycle of 60 percent at 40A and 100 percent at 20A, and a fit list naming CUT-40, CUT-40D, LGK-40, CT312, CT312D, CT416, CT416D, CT518, CT518D, Super160 and Super160P. The box includes the handle, long electrode, tip, swirl ring and shield cup, so you get consumables with the head. Its stated HF cutting thickness is up to 12 mm, and the hand piece weighs 168 g.

If you are buying your first cutter, the Bestarc CUT60XP example is the complete-machine side of this comparison. Plan the electrics first: the listing calls for a breaker up to 40A at 110V or up to 30A at 220V, and the machine runs dual voltage 110/220V. Plan the air next: dry compressed air within 70 PSI at 250 liters per minute through the 1/4 NPT quick-connect, with the listing giving 50 PSI at 35A on 110V and 65 PSI at 60A on 220V alongside its thickness ratings. Those ratings are 5/8 in clean cut and 4/5 in maximum cut, with 9/16 in recommended at 35A on 110V. For consumable life, the listing recommends 4 to 8 seconds of post-flow cooling, and the blow-back pilot arc avoids the high-frequency signal entirely, which the listing says prevents HF interference around shop electronics.

FAQ for welders

What is the difference between pilot arc and high frequency start?

Pilot arc, in the blow-back form the Bestarc listing describes, initiates the arc without touching the metal and avoids the high-frequency signal entirely, which the listing says prevents HF interference. High frequency start, as on the PT31 torch, uses a high-frequency signal to start the arc.

Does pilot arc work without touching the metal?

Per the Bestarc listing, yes: the blow-back pilot arc initiates the arc without touching the metal, and low-frequency arc maintenance reduces electrode burn while not cutting.

What machines does the PT31 torch head fit?

The listing names CUT-40, CUT-40D, LGK-40, CT312, CT312D, CT416, CT416D, CT518, CT518D, Super160 and Super160P, and says it is for 40 and 50A cutting machines.

What air supply does the Bestarc CUT60XP need?

Dry, compressed air. The listing recommends within 70 PSI with a 250 liters per minute flow rate through the 1/4 NPT quick-connect, and gives 50 PSI at 35A/110V and 65 PSI at 60A/220V alongside its thickness recommendations.

Is the PT31 a complete plasma cutter?

No. The listing is a torch head body with consumables: handle, long electrode, tip, swirl ring and shield cup. It needs a 40 to 50A plasma machine to work.

Related: contact start vs pilot arc plasma cutter, machine torch vs hand torch plasma cutter, air plasma vs nitrogen plasma cutter and dual voltage vs 110V plasma cutter.

Scoring, line by line

Each example is scored out of 10 on performance, build, value, safety and warranty, with the weights published on our How We Pick page. The torch head scores lower because it is a part, not a machine; that is the listing’s nature, not a defect.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Bestarc CUT60XP 60A 9.6 32 21 21 7 0
PT31 Torch Head 40A 9.4 23 19 18 5 0

A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number.

More buying guides