Hot Start vs Arc Force Stick Welder: Which One Should You Buy?
ESAB Rogue ES 180i and ARCCAPTAIN ARC200P put adjustable hot start and arc force settings on stick welder packages, and the listings separate them on output and box contents.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
ARCCAPTAIN 200A Pulse Stick Welder9.6/10View on Amazon - 2
ESAB 0700500070 MINIARC Rogue ES 180i Stick9.3/10View on Amazon
This guide covers hot start vs arc force stick welder. Verdict. Choose the hot start side, shown by the ESAB listing, for dual voltage stick work with a special mode for stick 6010 and generator-compliant use. Choose the arc force side, shown by the ARCCAPTAIN listing, for a stated output range, pulse processes and a stocked box. Neither listing states a warranty term, and the ESAB listing leaves output and weight unclear, so the choice turns on which stated facts matter for the job at hand.
A stick weld on a farm gate or a shop repair often starts badly: the rod sticks, the arc sputters, and the bead never settles. That is where hot start vs arc force stick welder settings matter, because one setting helps the arc strike and the other helps keep the arc steady when it shortens during welding. This comparison puts the ESAB listing on the hot start side against the ARCCAPTAIN listing on the arc force side, using only what each listing states.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
The two machines

ARCCAPTAIN 200A Pulse Stick Welder
A 20–200A pulse stick welder with Standard MMA, Pulse MMA and Lift TIG processes, adjustable hot start and arc force, and a stocked box for home, farm and shop repairs.
Pros
- 20–200A output on 220V and 20–160A on 110V, with hot start and arc force adjustable from 0–60A
- Standard MMA, Pulse MMA and Lift TIG processes, with Synergic Control for beginners
- Works with E6010, E6011, E6013 and E7018 rods, for stainless steel and mild steel
- Box includes 10 welding rods, a wire brush, a 10 ft electrode holder and a 10 ft ground clamp, plus a carrying handle and shoulder strap
Cons
- Lift TIG torch sold separately, so Lift TIG needs an extra purchase
- No duty cycle stated in the listing
- No warranty term stated; the listing promises 2-year reliable quality service instead

ESAB 0700500070 MINIARC Rogue ES 180i Stick
A dual voltage stick welding system with adjustable hot start and arc force, a special mode for stick 6010, and generator-compliant use, rated for electrodes up to 5/32".
Pros
- Adjustable hot start and arc force, with a special mode for stick 6010
- Dual voltage input, for use on a single phase plug
- Generator compliant, with 7kW recommended for generator use
- Practical design the listing describes as easy to carry to varied work sites
Cons
- No output range stated in the listing
- No box contents stated in the listing
- No warranty term stated in the listing
Other welders and gear to compare
ARCCAPTAIN 250A Stick WelderCheck price on Amazon
ARCCAPTAIN 160A Stick WelderCheck price on Amazon
TOOLIOM 135A 110V Mini Stick WelderCheck price on Amazon
GNI Upgraded Portable MINI WelderCheck price on Amazon
250Amp Stick Welder 110V IGBT Portable Arc Welding MachineCheck price on Amazon
PLASMARGON 250A Stick WelderCheck price on Amazon
Side by side
| ARCCAPTAIN ARC200P | ESAB Rogue ES 180i | Notes | |
|---|---|---|---|
| Gear Score | 69 | 49 | Totals from the scores in this article |
| Hot start and arc force | Adjustable, 0–60A | Adjustable, no range stated | Both listings name both settings |
| Output range | 20–200A on 220V, 20–160A on 110V | Not stated | Only the ARCCAPTAIN listing states an output range |
| Processes | Standard MMA, Pulse MMA, Lift TIG | Stick | Lift TIG torch sold separately |
| Electrodes and rods | E6010, E6011, E6013, E7018 | Stick 6010 mode, electrodes up to 5/32″ | Both listings name 6010 |
| Plate thickness | 0.04–0.39″ | Not stated | Only the ARCCAPTAIN listing states plate thickness |
| Input | 110V and 220V | Dual voltage input | ESAB listing does not name the voltages |
| Weight | 7.2 lbs in bullets, 7.0 Pounds in table | 0.000625 Pounds in table, unclear | Listings disagree or leave weight unclear |
| In the box | 10 welding rods, wire brush, 10 ft electrode holder, 10 ft ground clamp | Not stated | Only the ARCCAPTAIN listing names box contents |
| Generator use | Not stated | Generator compliant, 7kW recommended | Only the ESAB listing names generator use |
| Warranty term | Not stated, 2-year reliable quality service promised | Not stated | Neither listing states a warranty term |
| Safety listing | FCC and ANSI standards, over current, over voltage, overload and overheating protection | IP23S designed | Neither listing states a CSA, UL or ETL listing |
Treat the specs as maker ratings pulled straight from the listings; we gathered them on 2 November 2026. Neither listing states a CSA, UL or ETL listing.
Hot start vs arc force stick welder settings
Both listings name both settings, so the sides in this comparison are examples, not exclusive claims. The ARCCAPTAIN listing gives a range: hot start and arc force adjustable from 0–60A. The ESAB listing says adjustable hot start and arc force, with no range stated. That gap means a direct range comparison is not possible, and the ESAB side should not be called weaker on a range its listing never states. The ARCCAPTAIN listing describes adjustable hot start and arc force as providing easier arc starts and a smoother, more stable arc.
Power and output
The ARCCAPTAIN listing states 20–200A on 220V and 20–160A on 110V. The ESAB listing states dual voltage input but names no voltages and states no output range, so output cannot be compared head to head from the listings alone. The ESAB listing does name generator-compliant use, with 7kW recommended, while the ARCCAPTAIN listing states no generator use. Neither listing states a duty cycle, so run time at a given output cannot be compared either.
Processes and rods
The ARCCAPTAIN listing names Standard MMA, Pulse MMA and Lift TIG processes, with the Lift TIG torch sold separately, and it lists E6010, E6011, E6013 and E7018 rods, and it names stainless steel and mild steel among the metals the welder suits. It also states plate thickness of 0.04–0.39 inches. The ESAB listing names stick only, with a special mode for stick 6010 and electrodes up to 5/32 inches, and it states no plate thickness. On processes, the ARCCAPTAIN listing states more options, while on 6010 work the ESAB listing names a dedicated mode that the ARCCAPTAIN listing does not single out.
Weight and build
The ARCCAPTAIN listing puts weight at 7.2 lbs in the bullets and 7.0 Pounds in the spec table, and it includes a carrying handle and shoulder strap. The bullets should be trusted over the table on that point, and the difference is small either way. The ESAB listing describes a practical design that is easy to carry, but its spec table lists 0.000625 Pounds, which does not square with a carry-ready power source, so the ESAB listing leaves weight unclear. On dimensions, the ESAB table gives 19.0 inches x 14.0 inches x 9.5 inches, against 10.0 inches x 3.0 inches x 5.0 inches for the ARCCAPTAIN table.
What is in the box
The ARCCAPTAIN listing names 10 welding rods, a wire brush, a 10 ft electrode holder and a 10 ft ground clamp, so a first job can start from the box apart from the Lift TIG torch, which is sold separately. The ESAB listing states no box contents, so nothing about its box can be compared. That is a plain gap in the ESAB listing, not a reason to assume parts are missing or included.
Warranty and service
Neither listing states a warranty term. The ARCCAPTAIN listing promises 2-year reliable quality service, which is a service promise, not a warranty term. The ESAB listing states no term at all. Buyers who need a written warranty term will not find one in either listing.
Choose the ESAB Rogue ES 180i if
- You need dual voltage stick work with a special mode for stick 6010.
- You plan generator-compliant use, with 7kW recommended in the listing.
- You weld electrodes up to 5/32 inches.
- You can work without a stated output range or stated box contents.
Choose the ARCCAPTAIN ARC200P if
- You want a stated output range of 20–200A on 220V.
- You want Standard MMA, Pulse MMA and Lift TIG processes in one machine.
- You want rods, a brush, a holder and a clamp named in the box.
- You want hot start and arc force stated as adjustable from 0–60A.
Before You Strike an Arc
- Check the power supply the listing states before plugging in: dual voltage input for the ESAB listing, and 110V and 220V inputs for the ARCCAPTAIN listing.
- Match rods to the listing: E6010, E6011, E6013 and E7018 for the ARCCAPTAIN listing, and electrodes up to 5/32 inches for the ESAB listing.
- Check the delivered machine and its box against the listing on arrival, since the ARCCAPTAIN listing disagrees on weight, the ESAB listing leaves weight unclear, and the Lift TIG torch is sold separately.
- Weld with ventilation, clear flammables from the area, and wear a helmet, gloves and flame resistant clothing suited to stick welding.
FAQ for welders
What is the difference between hot start and arc force on these listings?
Both listings name both settings, so neither setting belongs to one side alone. The ARCCAPTAIN listing states hot start and arc force adjustable from 0–60A and describes them as providing easier arc starts and a smoother, more stable arc. The ESAB listing states adjustable hot start and arc force with no range given.
Which listing states an output range?
Only the ARCCAPTAIN listing states one, at 20–200A on 220V and 20–160A on 110V. The ESAB listing states dual voltage input and no output range, so output cannot be compared from the listings alone.
Can the ARCCAPTAIN welder run Lift TIG out of the box?
No, the Lift TIG torch is sold separately. The listing names Standard MMA and Pulse MMA alongside Lift TIG, but the torch needed for Lift TIG is not in the named box contents.
Does either listing state a warranty term?
No. The ARCCAPTAIN listing promises 2-year reliable quality service, which is a service promise rather than a warranty term. The ESAB listing states no term at all.
Which listing mentions generator use?
The ESAB listing names generator-compliant use, with 7kW recommended. The ARCCAPTAIN listing states no generator use, so generator use cannot be compared from the listings alone.
Related: best stick welder with hot start, 6010 vs 7018 welding rod, best stick welder for farm use, and the stick welders hub.
Scoring, line by line
Both machines are scored on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| ARCCAPTAIN ARC200P | 9.6 | 29 | 21 | 21 | 7 | 0 |
| ESAB Rogue ES 180i | 9.3 | 23 | 19 | 18 | 0 | 0 |
Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score.




