E71T-11 vs E71T-GS Wire: Which One Should You Buy?
E71T-11 vs E71T-GS wire: passes, diameters and spool compared, with three examples scored from the listings.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
PGN E71T-11 .035" Gasless Flux Core Welding Wire9.6/10View on Amazon - 2
PGN E71T-11 .030" Gasless Flux Core Welding Wire9.6/10View on Amazon - 3
findmall E71T-GS Gasless-Flux Core Wire Welding9.6/10View on Amazon
E71T-11 vs E71T-GS wire verdict: Choose E71T-11 for general gasless work: the PGN examples cover single-pass and multi-pass welding in .030 and .035 in on 10 lb spools. Choose E71T-GS for single-pass work on thin stock: the findmall example is a 0.045 in wire pitched at thin-gauge mild and galvanized steel. Both are self-shielded and need no gas; the difference is passes and diameter.
Flux core wire classifications look like alphabet soup, but the two here are close cousins. E71T-11 is the general-purpose self-shielded wire for single and multi-pass welds. E71T-GS is the single-pass wire for thin material. This e71t-11 vs e71t-gs wire comparison walks through the two sides, then scores two E71T-11 examples and one E71T-GS example from the listings we reviewed.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Three examples

PGN E71T-11 .035" Gasless Flux Core Welding Wire
A 10 lb spool of .035 in gasless E71T-11 flux core wire for single-pass and multi-pass welding.
Pros
- .035 in: the thicker E71T-11 here
- Single-pass and multi-pass stated
- Low spatter and precise arc control claimed
- Tangle-resistant packing
Cons
- No safety certification stated
- No warranty term stated
- Mild steel only
- Confirm spool fit before ordering, per the listing

PGN E71T-11 .030" Gasless Flux Core Welding Wire
A 10 lb spool of .030 in gasless E71T-11 flux core wire for single-pass and multi-pass welding.
Pros
- .030 in: the thinner E71T-11 here
- Single-pass and multi-pass stated
- Low spatter and stable arc claimed
- Tangle-resistant packing
Cons
- No safety certification stated
- No warranty term stated
- Mild steel only
- Thinner wire: slower deposition on thick stock

findmall E71T-GS Gasless-Flux Core Wire Welding
A 10 lb spool of 0.045 in E71T-GS gasless flux core wire for single-pass work on thin steel.
Pros
- 0.045 in: the thickest wire here
- Pitched at thin-gauge mild and galvanized steel
- Vacuum-sealed aluminum foil packing
- Claims AWS A5.20 / E71T-11 conformance
Cons
- Single-pass fillet and lap: not a multi-pass rating
- No safety certification stated
- No warranty term stated
Other welders and gear to compare
Blue Demon E71T-11 X .030 X 2LB Spool gasless flux coreCheck price on Amazon
PGN E71T-11 .030" Gasless Flux Core Welding Wire 2 lb LowCheck price on Amazon
PGN E71T-11 .035" Gasless Flux Core Welding Wire 2 lb LowCheck price on Amazon
PGN E71T-11 .035"Check price on Amazon
PGN E71T-11 .030" + .035" Gasless Flux Core Welding Wire 2 lbCheck price on Amazon
PGN E71T-11 .030"Check price on Amazon
E71T-11 vs E71T-GS wire: side by side
| Factor | E71T-11 (examples) | E71T-GS (example) | From the listings |
|---|---|---|---|
| Example products | PGN E71T-11 .035 in, PGN E71T-11 .030 in | findmall E71T-GS Wire | Two vs one listing |
| Diameters | .035 in; .030 in (listed) | 0.045 in (listed) | Varies by example |
| Spool | 10 lb (listed) | 10 lb (listed) | Same spool weight |
| Passes | Single-pass & multi-pass (listed) | Single-pass fillet and lap (listed) | The real split |
| Shielding | Gasless / self-shielded (listed) | Self-shielded (listed) | No gas either side |
| Pitched at | T-joints, butt and lap welds (listed) | Thin-gauge mild or galvanized steel (listed) | Joints vs thin stock |
| Packing | Tangle-resistant packing (listed) | Vacuum-sealed foil (listed) | Both protected |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 19 October 2026; each number applies only to the listing it came from.
Passes: the real difference
The listings draw the line at passes. Both PGN E71T-11 listings state single-pass and multi-pass welding with precise arc control and low spatter, for T-joints, butt welds and lap welds. The findmall E71T-GS listing states single-pass fillet and lap welding, and pitches the wire at thin-gauge mild or galvanized steel, farm implement fabrication and general shop work with poor fit-up or rusty, oily plates. If your work stacks passes, the E71T-11 side is the stated choice; if it is single-pass on thin stock, the GS side fits.
Diameter and spool
Both sides come on 10 lb spools and both are gasless. The E71T-11 examples are .030 and .035 in; the E71T-GS example is 0.045 in. Thinner wire suits thinner material and lower amperage machines. The 0.045 in findmall GS wire is pitched at thin-gauge steel for single-pass work, so judge it by its stated thin-gauge use, not by diameter alone. The PGN listings emphasize tangle-resistant packing; the findmall listing ships vacuum-sealed in aluminum foil.
The conformance wrinkle
One detail deserves a flag: the findmall E71T-GS listing states the wire is mild steel conformed to AWS A5.20 / ASME SFA5.20 / E71T-11. In other words, this particular GS wire claims E71T-11 conformance. That blurs the classification line the listings otherwise draw, and it is a single-listing claim: no other listing here makes it. See gasless vs gas-shielded flux core wire and 030 vs 035 flux core wire.
Buying advice: diameter, storage and the machine behind the wire
Start with diameter, because it decides what your machine can feed. The listings give you three: .030 and .035 in on the E71T-11 side, both on 10 lb spools, and 0.045 in on the E71T-GS side, also on a 10 lb spool. Thinner wire suits thinner metal and smaller machines. The 0.045 in findmall GS wire is pitched at thin-gauge steel for single-pass work, and it needs a machine that feeds that diameter. The PGN .035 listing notes its 10 lb spool and asks you to confirm your machine’s spool requirements before buying; the PGN .030 spec table lists 10.87 lb item weight against its 10 lb spool.
Watch the findmall weight figure. Its title and bullets both say 10 lb, but its spec table says 2 LB. Trust the title and bullets here: this is a 10 lb spool, and the spec table figure is the odd one out.
Storage matters for flux core. The findmall listing wraps the wire in vacuum-sealed aluminum foil, which keeps moisture off the flux filling. Flux core wire left open in a damp shop picks up moisture and welds poorly, so keep the spool sealed until it goes on the machine and store the machine somewhere dry. Neither PGN listing states its packing, so buy assuming standard spool packaging.
Read the conformance and composition lines before you trust a spool with structural work. The findmall listing claims conformance to AWS A5.20 / E71T-11 and publishes a typical deposited metal composition: C=0.17, Si=0.31, Mn=0.77, P=0.01, S=0.001, Mo=0.003, Cu=0.01, V=0.002, remainder Fe. Those are the listing’s figures, not a third-party verification. For load-bearing welds, a listing claim is a starting point, not a certification; have the work inspected by someone qualified.
Finally, match the wire to the joints you weld. The PGN .035 listing names T-joints, butt welds and lap welds in single-pass and multi-pass. The findmall listing names single-pass fillet and lap welding, pitched at thin-gauge mild or galvanized steel, plus construction work, farm implement fabrication, shaft buildup, tanks and truck bodies. Neither side needs shielding gas: the flux filling acts as the shielding agent, which is what makes both wires practical for outdoor work.
FAQ for welders
What is the difference between E71T-11 and E71T-GS?
In these listings, E71T-11 is stated for single-pass and multi-pass welding; E71T-GS is stated for single-pass fillet and lap welding, pitched at thin-gauge steel. Both are self-shielded and need no gas.
Can E71T-GS do multi-pass welds?
The findmall listing states single-pass fillet and lap welding, though it also calls the wire great in single or multi-pass welds on thin-gauge steel. Treat single-pass as the stated rating.
What diameter should I buy?
The listings offer .030 and .035 in on the E71T-11 side and 0.045 in on the GS side. Match the diameter to your machine and material thickness. See 030 vs 035 flux core wire.
Does flux core wire need gas?
No. All three listings are gasless or self-shielded: the flux filling acts as the shielding agent. See solid wire vs flux core wire.
Is the findmall wire really E71T-11?
Its listing claims conformance to AWS A5.20 / E71T-11. That is the listing’s claim, not an independent verification.
Related: solid wire vs flux core wire and gas MIG vs gasless flux core.
Scoring, line by line
Each wire is scored out of 10 on performance, build, value, safety and warranty, using only what the listing publishes. None of the three listings states a safety certification or a warranty term, so every safety and warranty score here is 0. The weights are on the site’s how we pick page.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| PGN E71T-11 .035 in | 9.6 | 30 | 21 | 21 | n/a | 0 |
| PGN E71T-11 .030 in | 9.6 | 30 | 21 | 20 | n/a | 0 |
| findmall E71T-GS Wire | 9.6 | 29 | 20 | 21 | n/a | 0 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.
Which should you choose?
Choose E71T-11 if you want single-pass and multi-pass capability in .030 or .035 in, with low spatter claims on both PGN listings.
Choose E71T-GS if you weld single-pass on thin-gauge mild or galvanized steel and want the 0.045 in findmall wire’s vacuum-sealed packing.




