Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

E71T-1 vs E71T-8 Wire: Which One Should You Buy?

E71T-1 runs with external shielding gas while E71T-8 shields itself, and the right choice comes down to wind, gas gear and where you weld.

E71T-1 vs E71T-8 Wire: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1PGN E71T-11 .035" Gasless Flux Core Welding WirePGN E71T-11 .035" Gasless Flux Core Welding Wire9.6/10View on Amazon
  2. 2PGN E71T-11 .030" Gasless Flux Core Welding WirePGN E71T-11 .030" Gasless Flux Core Welding Wire9.6/10View on Amazon
  3. 3findmall E71T-GS Gasless-Flux Core Wire Welding Wire 0.045Infindmall E71T-GS Gasless-Flux Core Wire Welding Wire 0.045In9.6/10View on Amazon
  4. 4ARCCAPTAIN Flux Core Welding Wire E71T-GS .030" 2LB x 2ARCCAPTAIN Flux Core Welding Wire E71T-GS .030" 2LB x 2View on Amazon
  5. 5YESWELDER E71T-11 Gasless Mild Steel MIG WireYESWELDER E71T-11 Gasless Mild Steel MIG WireView on Amazon
  6. 6YESWELDER E71T-11 Flux-Cored Gasless Mild Steel MIG WireYESWELDER E71T-11 Flux-Cored Gasless Mild Steel MIG WireView on Amazon
  7. 7ATLASWELDER Flux Core Welding WireATLASWELDER Flux Core Welding WireView on Amazon
  8. 8Bestarc Flux Core Welding WireBestarc Flux Core Welding WireView on Amazon
  9. 9SEESII Flux Core Welding Wire .030SEESII Flux Core Welding Wire .030View on Amazon

A fence repair out in the wind and a clean shop job on a bench ask for different wire, and that is what e71t-1 vs e71t-8 wire comes down to. E71T-1 is a gas-shielded flux-core wire: it needs external shielding gas from a cylinder to protect the puddle. E71T-8 is a self-shielded flux-core wire: the flux inside the wire makes its own shield, so no cylinder is needed. Both are flux-core wires, both leave slag on the bead, and the choice turns on where you weld and whether gas gear is already in the shop.

Other welders and gear to compare

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

The difference in one paragraph

Molten steel reacts with oxygen and nitrogen in the air, which makes a porous, weak weld. Gas-shielded flux-core wire feeds through the gun with shielding gas from a cylinder around it, the same way solid wire runs with gas. Self-shielded flux-core wire is hollow and filled with flux that burns to make its own shielding gas and leaves a layer of slag on the bead. No cylinder, no hose, no regulator on the self-shielded side, and gas shielding that is easily disturbed by wind outdoors.

e71t-1 vs e71t-8 wire side by side

E71T-1 E71T-8 On the bench
Shielding Shielding gas from a cylinder Flux in the wire makes its own shield The core difference
Gas gear Cylinder, regulator and gas hose None Self-shielded wire skips the cylinder
Wind Easily disturbed by wind outdoors Built for outdoor and windy work Wind is the usual reason to go self-shielded
Slag Flux leaves slag to chip Flux leaves slag to chip Both are flux-core wires

Always follow the polarity printed on your wire’s label and in the machine’s manual.

When E71T-1 is the better choice

  • Indoor shop work. In a still shop, gas shielding stays put, so the gas-shielded side earns its keep on bench jobs, frames and fixtures.
  • Visible work. Gas-shielded wire generally leaves less cleanup than self-shielded wire, which matters on work that stays visible.
  • A cylinder already in the shop. If gas, a regulator and a hose are already set up, the gas-shielded side costs nothing extra in gear.
  • Calmer, cleaner beads on prepared steel. On clean, fitted steel indoors, gas shielding tends to give a steady arc and a tidy bead.

When E71T-8 is the better choice

  • Outdoor and field work. Fence posts, gates, trailers and equipment in a field. A breeze that can disturb gas shielding affects self-shielded wire far less.
  • No cylinder to haul. You avoid buying or renting a cylinder and regulator, and there is nothing to refill before a remote job.
  • Windy, drafty corners. Barn doors open, a fan running, a job that cannot move inside: self-shielded wire holds up better where wind would disturb gas shielding.
  • Farm and site repair. When the work comes to you and the welder runs on a portable machine, the gasless side travels lighter.

The gear below

None of the 4 wires below is an E71T-1 or E71T-8 spool. All 4 are self-shielded flux-core wires, so they show the gasless side of this comparison: what a self-shielded spool looks like, what diameters and spool sizes listings state, and where each one fits. Read them as examples of the E71T-8 side of the choice, not as the wires in the keyword.

YESWELDER E71T-11, 0.030 inch, 10 lb

The YESWELDER listing states a gasless E71T-11 mild steel wire at 0.030 inch on a 10 lb spool, with a smooth arc and minimal spatter. The maker lists it for all-position welding, including flat and vertical work, and for construction, automotive repair and metal fabrication. The listing states excellent slag removal and good weld penetration, and the wire comes on a spool the maker describes as a robust ABS plastic spool. For a shop that burns a lot of gasless wire, the 10 lb spool is the largest spool in this gear section.

ATLASWELDER E71T-11, .035 inch, 2 lb

The ATLASWELDER listing states a self-shielding E71T-11 gasless wire at .035 inch for all-position welding on mild steel, with smooth arc stability and minimal spatter. The title and the spec table both say 2 lb, while the listing’s bullets call it a 10-pound spool: go by the title’s 2 lb, since the bullets contradict the title and the spec table on spool size. The maker lists it for automotive repair, fabrication, maintenance and general metalworking, and the listing states it works with most standard MIG welders and flux-core machines.

Bestarc E71T-GS, 0.030 inch, 2 lb

The Bestarc listing states a 0.030 inch E71T-GS gasless wire on a 2-pound spool, made of AWS E71T-GS low carbon steel, with excellent penetration, smooth arc action and low splatter. The maker lists it for T-joints, butt welding and lap welding, and states the wire is vacuum sealed to keep moisture and dust out. The listing states it suits outdoor work under windy conditions and is compatible with most high frequency welders, for professional welders and beginners alike.

Seesii E71T-GS, 0.030 inch, 1 lb

The Seesii listing states a 0.030 inch E71T-GS gasless wire on a 1 lb spool, built for portable machines and small-scale DIY repair projects. The maker lists it for flat, vertical, horizontal and overhead welding, and for automotive repairs, metal fabrication and fence fixes. The listing states a stable, quiet arc that minimizes burn-through on thin metals, exceptionally low spatter, and a robust spool that keeps the wire tangle-free and protected from moisture. The 1 lb spool is the smallest spool in this gear section, so it suits a reader who wants to try gasless wire without committing to a large spool.

Which one should you buy?

Buy on wind and gas gear, not on habit. If the work stays indoors and a cylinder, regulator and hose are already in place, E71T-1 fits: gas shielding holds, cleanup is generally lighter, and the bead stays tidy. If the work goes outside, moves to a field, or runs on a machine with no gas setup, the self-shielded side fits: E71T-8 needs no cylinder and holds up better in a breeze. Before buying either, check the machine’s manual and door chart for the wire it supports: a flux-only machine cannot run gas-shielded wire, and a gas setup needs a gas valve and path in the machine and gun. See our how to choose a MIG welder guide for machine choice, and our best flux core welder guide for gasless machines.

Smoke, slag and gas safety. Self-shielded wire typically makes more smoke and fumes than gas-shielded wire, and hot slag can flick off when you chip it. Weld with good ventilation or outdoors with your head out of the plume, wear safety glasses under the helmet when chipping, and clear dry grass and anything flammable from the area. Chain gas cylinders upright, and never weld galvanized steel without ventilation and a respirator plan.

FAQ for welders

Can I run E71T-8 wire without a gas cylinder?

Yes. E71T-8 is self-shielded, so the flux inside the wire makes its own shield and no cylinder, regulator or gas hose is needed. That is why self-shielded wire suits field and farm work, where hauling a cylinder is a chore and wind can disturb gas shielding.

Can I run E71T-1 wire without gas?

No. E71T-1 is gas-shielded, so it needs external shielding gas from a cylinder to protect the puddle. Without gas, the molten steel reacts with air and the weld comes out porous and weak, so a flux-only machine cannot run it.

Do both wires leave slag?

Yes. Both are flux-core wires, so both leave a layer of slag on the bead that you chip off with a chipping hammer and wire brush before the next pass or painting. Slag is normal for flux-core wire on either side of this comparison, and it is not a sign of a bad weld.

Which side suits outdoor welding?

The self-shielded side suits outdoor welding. Gas shielding is easily disturbed by wind, while self-shielded wire carries its shield in the flux. The gasless listings below all stress outdoor and windy work for the same reason, and a fence or gate repair in the field is the classic self-shielded job.

What diameters and spool sizes do the gear wires below use?

The wires below are 0.030 inch except the ATLASWELDER wire at .035 inch, on 10 lb, 2 lb and 1 lb spools. The YESWELDER spool is the largest at 10 lb, the Bestarc and ATLASWELDER spools are 2 lb, and the Seesii spool is 1 lb. Match the diameter to what your machine’s drive rolls and gun liner support, and check the listing before ordering.

Related: best flux core welder, flux core vs MIG, how to choose a MIG welder, and the welding consumables hub.

More buying guides

Welding Consumables ·

ER70S-6 vs E71T-GS Wire: Which One Should You Buy?

ER70S-6 solid wire and E71T-GS flux-cored wire run through wire feed machines for different jobs, differing on shielding gas, polarity, wind, spatter and post-weld…