Bimetal vs Carbon Band Saw Blade: Which One Should You Buy?
Two Lenox bimetal blades compared on tooth design, TPI and stated metals, with no carbon blade featured: here is which tooth style fits your cut.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Lenox - CL16031CL7750 Classic Tuff Tooth9.6/10View on Amazon - 2
Lenox - 29232CLB72360 Classic Tuff Tooth Band Saw9.6/10View on Amazon
This guide covers bimetal vs carbon band saw blade. Verdict. Both blades featured here are bimetal, and no carbon band saw blade is featured, so there is no carbon blade to score against them. Lenox lists both blades for carbon steel, alloy steel, tool steel, structural steel, stainless steel, aluminum and other nonferrous metals. Between the two, the Lenox Classic Tuff Tooth Vari-Raker is the multipurpose pick, with a vari-tooth design the maker rates for faster cutting rates. The Lenox Classic Tuff Tooth 18 TPI is the pick for thin workpieces, where its wavy tooth set helps prevent stripping.
The cut is already marked out: tube, angle and flat stock stacked by the saw, waiting on a blade that will get through the pile without stripping teeth. That is where the bimetal vs carbon band saw blade choice lands in a small shop, and this comparison puts two Lenox bimetal blades side by side on what each listing states. No carbon band saw blade is featured here, because both featured listings are bimetal blades with an M-42 high-speed steel tooth edge.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
The two blades

Lenox - CL16031CL7750 Classic Tuff Tooth
A bimetal band saw blade with a vari-tooth, raker set design at 10-14 TPI and an M-42 high-speed steel tooth edge, in the 93 inch size.
Pros
- Vari-tooth design rated by the maker for faster cutting rates
- Vari-raker tooth set listed for multipurpose cutting applications
- M-42 high-speed steel tooth edge for heat and wear resistance
- Listed for carbon, alloy, tool, structural and stainless steel, plus aluminum
Cons
- One blade in the pack
- 93 inch length only fits saws that take that blade size
- 10-14 TPI pitch is not the fine pitch listed for thin workpieces
- No warranty term is stated

Lenox - 29232CLB72360 Classic Tuff Tooth Band Saw
A bimetal band saw blade with a regular tooth, wavy set design at 18 TPI and an M-42 high-speed steel tooth edge, in the 93 inch size.
Pros
- Wavy tooth set listed as helping prevent stripping on thin workpieces
- Tuff Tooth design listed as reducing tooth strippage
- M-42 high-speed steel tooth edge for heat and wear resistance
- Listed for carbon, alloy, tool, structural and stainless steel, plus aluminum
Cons
- One blade in the pack
- 93 inch length only fits saws that take that blade size
- Regular tooth design, not the vari-tooth design rated for faster cutting rates
- No warranty term is stated
Side by side
| Model | Gear Score | Length | Width | Thickness | TPI | Tooth set |
|---|---|---|---|---|---|---|
| Lenox Classic Tuff Tooth Vari-Raker | 9.6/10 | 93 in | 3/4 in | 0.035 in | 10-14 TPI | Raker set, vari-tooth |
| Lenox Classic Tuff Tooth 18 TPI | 9.6/10 | 93 in | 3/4 in | 0.035 in | 18 TPI | Wavy set |
Treat the specs as maker ratings pulled straight from the listings; we gathered them on 21 November 2026. Neither listing states a warranty term.
bimetal vs carbon band saw blade
The bimetal side of this comparison is covered by two Lenox Classic Tuff Tooth blades, and both carry the same stated build: a bimetal blade with an M-42 high-speed steel tooth edge, which Lenox lists for heat and wear resistance. Both are listed for the same metals: carbon steel, alloy steel, tool steel, structural steel, stainless steel, and aluminum and other nonferrous metals. Both are also listed as good for cuts in cylindrical solids, rectangular tubes, and structural shapes.
The carbon side has no featured listing here, so there is no carbon blade in this comparison with stated size, tooth pitch or metals to score against the bimetal pair. With no carbon blade featured, the choice here is between the two bimetal blades, which share the same stated coverage for the steels and aluminum named above. Within that bimetal pair, the choice comes down to tooth design, and that is where the two Lenox blades part ways. For the wider material picture, see our bimetal vs carbide band saw blade comparison and the types of band saw blades guide.
Tooth design and TPI
The Lenox Classic Tuff Tooth 18 TPI runs a regular tooth with a wavy set and positive rake at 18 TPI. Lenox lists the wavy tooth set as helping prevent stripping for cutting thin workpieces, and the Tuff Tooth design as reducing tooth strippage. The Lenox Classic Tuff Tooth Vari-Raker runs a regular tooth with a raker set and positive rake at 10-14 TPI, with a vari-tooth design Lenox rates for faster cutting rates than a regular tooth design, and a vari-raker tooth set for multipurpose cutting applications. Our variable pitch vs constant pitch band saw blade comparison covers that pitch choice in more detail.
Size and fit
Both blades are the same stated size: 93 inches long, 3/4 inch wide and 0.035 inch thick, sold as a 7 foot 9 inch blade. That makes fit a saw question, not a blade question: either blade suits a saw that takes that length, width and thickness, and neither suits a saw built for a different blade size. Check your saw against our band saw blade sizes chart before ordering.
Choose the Lenox Classic Tuff Tooth Vari-Raker if
- Your work mixes cylindrical solids, rectangular tubes and structural shapes.
- You want the vari-tooth design the maker rates for faster cutting rates.
- You cut across the stated metals, from carbon steel to stainless steel and aluminum.
- You want one multipurpose blade in the 93 inch size.
Choose the Lenox Classic Tuff Tooth 18 TPI if
- Your work runs to thin workpieces, where the wavy set helps prevent stripping.
- You want the finer 18 TPI pitch in the same 93 inch size.
- Tooth strippage has been your problem on the stated steels.
- You cut the same stated metals and shapes as the Vari-Raker.
Before You Strike an Arc
- Match the blade to your saw: 93 inches long, 3/4 inch wide, 0.035 inch thick.
- Wear eye protection and keep the saw guards in place for every cut.
- Clamp the work before cutting, and keep gloves away from the moving blade.
- Check the blade on arrival: tooth set, pitch and weld, before it goes on the saw.
FAQ for welders
Is a carbon band saw blade featured here?
No. Both featured listings are Lenox bimetal blades with an M-42 high-speed steel tooth edge, so the carbon side of the bimetal vs carbon band saw blade comparison has no featured blade with stated specs to score.
What metals do these bimetal blades cut?
Lenox lists both blades for carbon steel, alloy steel, tool steel, structural steel, stainless steel, and aluminum and other nonferrous metals.
Which Lenox blade is for thin workpieces?
The Lenox Classic Tuff Tooth 18 TPI. Its wavy tooth set is listed as helping prevent stripping for cutting thin workpieces, at 18 TPI.
Which Lenox blade cuts faster?
The Lenox Classic Tuff Tooth Vari-Raker carries a vari-tooth design that Lenox rates for faster cutting rates than a regular tooth design, at 10-14 TPI with a raker set.
What size are both blades?
Both are stated at 93 inches long, 3/4 inch wide and 0.035 inch thick. Confirm your saw takes that blade size before ordering either one.
Related: best band saw blade for metal, types of band saw blades, band saw blade sizes, and our band saw safety tips.
Scoring, line by line
Both blades are scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. Neither listing states a safety certification or a warranty term, so both score zero on those two lines.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Lenox Classic Tuff Tooth Vari-Raker | 9.6 | 29 | 21 | 20 | n/a | 0 |
| Lenox Classic Tuff Tooth 18 TPI | 9.6 | 28 | 21 | 20 | n/a | 0 |
Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.




