Best Stick Welder for Thin Metal (2026): 5 Compared
Five stick welders for thin metal compared: Forney, HONE, TOOLIOM, Protmex and Eioehtl, ranked by low-end amps and stated specs.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallForney 298 100ST 90A9.5/10View on Amazon - 2
Best Low EndHONE MMA205 205A9.5/10View on Amazon - 3
Best Dual VoltageTOOLIOM ARC-195 PRO9.5/10View on Amazon - 4
LightestProtmex PWM-015 120A9.4/10View on Amazon - 5
Most PowerEioehtl 250A Dual Volt9.4/10View on Amazon
Thin metal punishes hot, sloppy stick welding, so the best stick welder for thin metal is the one with the lowest controllable amperage and the right rods. We compared five machines by low-end amps, rod sizes, weight and warranty, and ranked them on what each listing states.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall Forney 298 100ST 90A: Forney 298, 90A on 120V, 12-month warranty. Check price on Amazon
- Best Low End HONE MMA205 205A: HONE, 20-205A, 25 rods and full kit. Check price on Amazon
- Best Dual Voltage TOOLIOM ARC-195 PRO: TOOLIOM, 110/220V, LCD display. Check price on Amazon
- Lightest Protmex PWM-015 120A: Protmex, 20-120A handheld at 3.3 lb. Check price on Amazon
- Most Power Eioehtl 250A Dual Volt: Eioehtl, 250A dual voltage, LED display. Check price on Amazon
The machines

Forney 298 Easy Weld 100ST 90 Amp Welder
A 120V 90A stick welder with TIG capability, 13.7 lb, 12-month warranty, 8 ft leads.
Pros
- 90A max, a low ceiling for thin metal
- Stick and TIG capable stated
- 12 month warranty against manufacturer defect
- 8 ft electrode holder and ground clamp
Cons
- 90A max, not for thick work
- No lift TIG torch detail stated
- 13.7 lb, heavier than the handhelds
- Residential use stated

HONE Stick Welder 110v, Upgraded 205Amp Mini
A 110V 20-205A stick and lift TIG welder with 25 rods, hot start and VRD, weight listed two ways.
Pros
- 20-205A adjustable, 20A low end for thin metal
- Stick and lift TIG modes stated
- 25 rods, brush, hammer, gloves and shield included
- Hot start, arc force, anti-stick and VRD stated
Cons
- No warranty term is stated
- Weight contradiction: 4.4 lb vs 9.17 lb listed
- 110V only, no dual voltage
- TIG torch not included

TOOLIOM 195A 110/220V Stick Welder
A 110/220V 195A stick and lift TIG welder with LCD display and optional VRD, weight listed two ways.
Pros
- 110/220V dual voltage stated
- Stick and lift TIG modes stated
- Intelligent LCD panel stated
- Rods and gloves in the kit
Cons
- No warranty term is stated
- Weight contradiction: 9.47 lb vs 14.45 lb listed
- Max 5/32 in rods, thick for thin metal
- Lift TIG torch not included

Portable Welding Machine - 110V Portable Welder
A 110V 20-120A handheld stick welder at 3.3 lb with 20 rods and a full kit in a carry bag.
Pros
- 20-120A with 5-position knob, 20A low end
- 3.3 lb handheld design stated
- 20 rods plus mask, glasses, gloves in the kit
- Hot start and anti-stick stated
Cons
- No warranty term is stated
- 110V only, no dual voltage
- Handheld form, not a bench machine
- 3/32 in rods stated, thin only

250Amp Stick Welder 110V/220V Dual Voltage
A 110V/220V 250A stick welder with LED display, 8.58 lb, 10 rods and full kit.
Pros
- 110V/220V dual voltage stated
- 250A max stated
- LED display with real-time current stated
- Hot start, arc force and anti-stick stated
Cons
- No warranty term is stated
- 250A ceiling, overkill for thin metal
- 220V adapter sold separately
- 8.58 lb, heavier than the handhelds
Other welders and gear to compare
MMA-135PRO Stick Welder 110VCheck price on Amazon
ARCCAPTAIN 160A Stick WelderCheck price on Amazon
S7 200A TIG Welder with DC TIG and Stick Welding 110V/220VCheck price on Amazon
SOARFLY 135A MIG WelderCheck price on Amazon
ARCCAPTAIN MIG145 Pro Flux Core MIG Welder 145A 120V 3-in-1Check price on Amazon
Spec sheet comparison
| Welder | Weld Score | Output | Input | Weight | Warranty |
|---|---|---|---|---|---|
| Forney 298 100ST 90A | 9.5/10 | 90A max | 120V | 13.7 lb | 12 month |
| HONE MMA205 205A | 9.5/10 | 20-205A | 110V | 4.4 / 9.17 lb* | Not stated |
| TOOLIOM ARC-195 PRO | 9.5/10 | Up to 195A | 110/220V | 9.47 / 14.45 lb* | Not stated |
| Protmex PWM-015 120A | 9.4/10 | 20-120A | 110V | 3.3 lb | Not stated |
| Eioehtl 250A Dual Volt | 9.4/10 | 250A max | 110/220V | 8.58 lb | Not stated |
All specs here repeat what the maker rates and the listing prints, copied down 19 October 2026. Asterisks mark listings that state the weight two different ways; see the reviews.
How to choose the best stick welder for thin metal
Low amps and small rods
The HONE states 20-205A and the Protmex 20-120A, both with a 20A low end, and both list 1/16 to 1/8 in or 3/32 in rods. The Forney tops out at 90A, which is naturally thin-metal territory. The TOOLIOM and Eioehtl run to 195A and 250A with rods up to 5/32 in, which suits thicker work instead.
Weight contradictions
Two listings state the weight two ways: the HONE at 4.4 lb in the bullets against 9.17 pounds in the spec table, and the TOOLIOM at 9.47 lb in the title against 14.45 pounds in the spec table. Treat both figures as uncertain and confirm before buying for carry weight. See our portable stick welder picks for carry-focused machines.
Warranty and kit
Only the Forney states a warranty: 12 months against manufacturer defect. The HONE ships the biggest kit with 25 rods, and the Protmex ships 20 rods with a full kit in a carry bag. For farm work see our stick welder for farm use guide.
Before you strike an arc. Wear a helmet with the right shade for the process and amperage, safety glasses underneath, leather gloves and flame resistant clothing. Weld with good ventilation, clear anything flammable from the area, and keep an extinguisher close. On thin metal, start at the lowest amps and a small rod; see our stick welding rod guide.
FAQ for welders
What amperage is best for thin metal stick welding?
As low as the machine goes with small rods. The HONE and Protmex state a 20A low end; the Forney tops out at 90A.
Which of these has a stated warranty?
Only the Forney 298, at 12 months against manufacturer defect.
Which is the lightest?
The Protmex at a stated 3.3 lb handheld. The HONE and TOOLIOM list two different weights each, so their carry weight is uncertain.
Do any run on 220V?
The TOOLIOM and the Eioehtl state 110V/220V dual voltage; the others are 110V or 120V only.
Related: the best portable stick welder picks and our stick welders hub.
Scoring, line by line
The Weld Score weighs performance, build, value, safety listing and warranty. For thin metal, a low amperage floor and small rods score highest: the Forney’s 90A ceiling, the HONE’s 20A low end and the Protmex’s 20-120A range all suit thin work, while 195A and 250A ceilings are overkill. Only the Forney states a warranty.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Forney 298 100ST 90A | 9.5 | 29 | 21 | 20 | 0 | 2 |
| HONE MMA205 205A | 9.5 | 30 | 21 | 21 | 0 | 0 |
| TOOLIOM ARC-195 PRO | 9.5 | 29 | 21 | 20 | 0 | 0 |
| Protmex PWM-015 120A | 9.4 | 28 | 20 | 21 | 0 | 0 |
| Eioehtl 250A Dual Volt | 9.4 | 29 | 20 | 20 | 0 | 0 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number.




