Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Mig Tig Stick Combination Welder (2026)

5 MIG, TIG and Stick combination welders from 135A to 205A, compared by processes, plasma cutting, duty cycle, weight and warranty.

Best Mig Tig Stick Combination Welder (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1ANDELI MIG-205DPBest OverallANDELI MIG-205DP9.6/10View on Amazon
  2. 2MJUM MIG160ABest Starter KitMJUM MIG160A9.5/10View on Amazon
  3. 3HITBOX HBMC270Best Plasma ComboHITBOX HBMC2709.5/10View on Amazon
  4. 4AZZUNO 135ABest PortableAZZUNO 135A9.4/10View on Amazon

A cracked trailer frame, a torn mower deck mount, a gate hinge that let go: bench jobs that need more than one process. The best mig tig stick combination welder runs MIG for speed, TIG for clean work and Stick for repair work, all from one box. This guide compares multiprocess machines on what each listing states: output, processes, plasma cutting, duty cycle and warranty.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall ANDELI MIG-205DP: 205A, 8-in-1 multiprocess with pulsed MIG, HF TIG and a 50A plasma cutter, CE certified, with a 2 year warranty. Check price on Amazon
  • Best Starter Kit MJUM MIG160A: 160A 4-in-1 welder with a 60% duty cycle, a complete starter kit and a 2 year warranty. Check price on Amazon
  • Best Plasma Combo HITBOX HBMC270: 200A 9-in-1 machine with a 40A plasma cutter, pulse MIG, HF TIG and spot welding. Check price on Amazon
  • Best Portable AZZUNO 135A: 135A 3-in-1 welder at 9 lb for home DIY and automotive repair, with SYN control. Check price on Amazon

The machines

ANDELI Multiprocess MIG Welder,Plasma Cutter

ANDELI Multiprocess MIG Welder,Plasma Cutter

ANDELI9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

205A 8-in-1 welder with pulsed MIG, HF TIG, a 50A plasma cutter and cold and clean modes, CE certified, 2 year warranty.

Pros

  • 205A maximum welding current, the highest output here
  • 8-in-1: pulsed MIG, HF TIG, plasma cutting, cold and clean modes, plus Spot and MMA
  • 50A plasma cutter, 3/8 inch clean cut and 2/3 inch maximum cut
  • CE certified with auto shut-off and over-heat protection, and a 2 year warranty with free replacement parts

Cons

  • 60.6 lb, the heaviest pick here
  • 15 x 15 x 15 inch size takes up bench space
  • No duty cycle is stated in the listing
  • U-grooved drive rolls take .035 and .045 inch wire
160A 4-in-1 Welding Machine

160A 4-in-1 Welding Machine

MJUM9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

160A 4-in-1 welder with smart synergic control, a 60% duty cycle, IGBT inverter and a complete starter kit, 2 year warranty.

Pros

  • 160A output with smart synergic control for easier setup
  • 60% duty cycle, the only duty cycle stated here
  • Complete starter kit: torch, ground clamp, electrode holder, wire, gloves and mask
  • 2 year manufacturer warranty

Cons

  • No plasma cutter, unlike the ANDELI and HITBOX picks
  • Lift TIG torch not included
  • No safety certification is stated in the listing
  • No wire sizes are stated in the listing
HITBOX 200A MIG Welder With CUT

HITBOX 200A MIG Welder With CUT

HITBOX9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

200A 9-in-1 welder with a 40A plasma cutter, pulse MIG, HF TIG and spot welding for home DIY projects.

Pros

  • 200A output with pulse MIG, HF TIG and a 40A plasma cutter in one box
  • Synergic control matches voltage to current, with fine voltage trim
  • Spot welding in MIG mode, adjustable from 0 to 3 seconds
  • Dedicated aluminum MIG mode, graphite liner included

Cons

  • No warranty term is stated in the listing
  • No safety certification is stated in the listing
  • Plasma cutting needs an external air compressor, at 7.06 CMF and 101 PSI
AZZUNO 200A MIG Welder,110V/220V 4 in 1 Gas/Flux

AZZUNO 200A MIG Welder,110V/220V 4 in 1 Gas/Flux

AZZUNO9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

200A 4-in-1 welder with synergic control, gas and gasless MIG, Lift TIG and Stick, 110V/220V dual voltage, 1 year warranty.

Pros

  • 200A output with 4 processes: Flux Core MIG, Gas MIG, Lift TIG and Stick
  • Synergic control sets voltage and wire feed speed from amperage or wire diameter
  • Takes 2 lb and 10 lb spools with .030 to .040 inch wire
  • Overload and overheat protection built in, per the listing

Cons

  • Lift TIG torch not included
  • Spec table lists 130A output and 110V input against the 200A, 110V/220V title
AZZUNO 3 in 1 MIG Welder 110V

AZZUNO 3 in 1 MIG Welder 110V

AZZUNO9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

135A 3-in-1 welder with Flux Core MIG, Lift TIG and Stick, SYN control and overheat warning, 9 lb, for home DIY and automotive repair.

Pros

  • 9 lb, the lowest weight here, with a handle for carrying
  • SYN control adjusts current and voltage from the wire diameter
  • Overheat warning system with a lighted reminder and a cooling fan
  • Ships with 1 lb of .030 inch flux cored wire, tips and a nozzle

Cons

  • 110V only, no 220V input
  • 135A is the lowest output here, and welds up to 5/32 inch
  • No warranty term is stated in the listing
  • No safety certification is stated in the listing

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Max output Processes Voltage Cutting Weight Warranty
ANDELI MIG-205DP 9.6/10 205A 8-in-1, Pulsed MIG, HF TIG, plasma, Stick 110V/220V 50A plasma, 3/8 in clean, 2/3 in max 60.6 lb 2 years
MJUM MIG160A 9.5/10 160A 4-in-1, Flux Core MIG, Gas MIG, Lift TIG, Stick 110V/220V Not stated 20 lb 2 years
HITBOX HBMC270 9.5/10 200A 9-in-1, Pulse MIG, HF TIG, plasma, Stick 110V/220V 40A plasma, 1/4 in clean, 1/2 in max 41.2 lb Not stated
AZZUNO MIG200F 9.4/10 200A 4-in-1, Flux Core MIG, Gas MIG, Lift TIG, Stick 110V/220V Not stated 23.8 lb 1 year
AZZUNO 135A 9.4/10 135A 3-in-1, Flux Core MIG, Lift TIG, Stick 110V Not stated 9 lb Not stated

These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on November 2026. Output is the maximum current the listing states.

How the picks were scored

Each welder is scored on performance, build, value, safety and warranty. How we pick explains the weights, and a spec the listing does not publish scores nothing. Only the ANDELI listing states a safety certification, so it is the only pick with points on that criterion.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
ANDELI MIG-205DP 9.6 33 22 20 5 0
MJUM MIG160A 9.5 29 20 21 0 3
HITBOX HBMC270 9.5 30 21 21 0 0
AZZUNO MIG200F 9.4 27 18 19 0 2
AZZUNO 135A 9.4 26 19 20 0 0

Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score.

What the listings tell you, and what they leave out

5 listings were read for this guide. 3 of the 5 state a warranty term: the ANDELI and MJUM at 2 years, and the AZZUNO 200A at 1 year. Only the ANDELI listing states a safety certification, CE. None of the 5 states a duty cycle except the MJUM, at 60%.

Contradictions show up in the spec tables. The AZZUNO 200A title and bullets state 200A and 110V/220V, while its spec table lists 130A output and 110V input, and gives two different weights, 8.6 lb and 23.8 lb. The HITBOX title states 9-in-1 while its spec table color field reads 6 in 1. The AZZUNO 200A bullets state welds up to 5/16 inch thick, while its spec table lists 5/32 inch. This guide follows the title and bullets.

Buying guide: choosing the best mig tig stick combination welder

MIG, TIG and Stick in one box

MIG feeds wire for speed on steel, TIG runs an arc from a tungsten electrode for clean work, and Stick burns electrodes for repair work. All 5 picks run Flux Core MIG, Lift TIG and Stick, and the AZZUNO 200A and MJUM add Gas MIG. The ANDELI and HITBOX add plasma cutting, pulsed MIG and HF TIG.

Output and thickness

Output here runs from 135A to 205A. The AZZUNO 135A welds up to 5/32 inch thick, the AZZUNO 200A up to 5/16 inch, and the ANDELI cuts 3/8 inch clean and 2/3 inch at maximum. Read the thickness with its condition: the HITBOX plasma cutter cuts 1/4 inch at 40A and 50 PSI, and 1/2 inch at 55 PSI.

Voltage and wire

4 of the 5 picks run on 110V/220V dual voltage, while the AZZUNO 135A runs on 110V only. Wire sizes run from .023 inch to .045 inch: the HITBOX takes .023, .030, .035 and .039 inch wire, the AZZUNO 135A takes .030 and .035 inch, and the ANDELI drive rolls take .035 and .045 inch wire. Spool sizes run from 2 lb to 11.02 lb.

Plasma cutting

2 of the 5 picks add a plasma cutter: the HITBOX at 40A and the ANDELI at 50A. The HITBOX needs an external air compressor, at 7.06 CMF and 101 PSI, and the ANDELI ships a plasma cutting torch in the box. A plasma cutter suits cutting plate and shapes before welding, but it adds a torch and an air supply.

Warranty and safety

Warranty terms are 2 years on the ANDELI and MJUM, 1 year on the AZZUNO 200A, and not stated on the other 2 picks. The ANDELI is the only pick with a stated safety certification, CE, plus auto shut-off and over-heat protection. The MJUM states overheat, over-voltage and over-current protection, and the AZZUNO 135A states an overheat warning system with a cooling fan. No pick states a CSA, UL or ETL listing.

Use as directed. Keep the area under and around the work clear of anything that can burn, since spatter and slag fall where they land. Lock the work down before striking an arc, keep cords and gas hoses clear of hot slag, and wear a helmet, gloves and sleeves rated for the process.

Before You Strike an Arc

  • Check the input voltage against the outlet: 4 of the 5 picks run 110V/220V, the AZZUNO 135A runs on 110V only.
  • Match the wire to the drive rolls: the ANDELI ships U-grooved rolls for .035 and .045 inch wire, and the HITBOX takes .023 to .039 inch wire.
  • Confirm the TIG torch situation: the AZZUNO 200A and MJUM listings state the Lift TIG torch is not included, while the ANDELI ships one in the box.
  • Check the stick electrodes on hand: the AZZUNO picks state E6013 electrodes, and the HITBOX states 5/64, 3/32 and 1/8 inch electrodes.
  • For plasma cutting, confirm the air supply: the HITBOX needs an external air compressor, and the ANDELI ships an air filter regulator.

FAQ for welders

Is stick welding MIG or TIG?

Neither. Stick, MIG and TIG are separate processes: Stick burns a coated electrode, MIG feeds wire, and TIG runs an arc from a tungsten electrode. A combination welder runs MIG, TIG and Stick from one box.

Which is the strongest weld, MIG, TIG or Stick?

The listings here do not rank weld strength by process, and strength depends on the joint and the settings as much as the process. MIG suits speed on steel, TIG suits clean work, and Stick suits repair work. Pick the process that fits the job and the metal, not a strength ranking.

Can a combination welder cut metal too?

2 of the 5 picks here add a plasma cutter: the HITBOX at 40A and the ANDELI at 50A. The HITBOX cuts 1/4 inch clean and 1/2 inch at maximum, while the ANDELI cuts 3/8 inch clean and 2/3 inch at maximum. The other 3 picks weld only.

What wire sizes do these welders take?

Wire sizes run from .023 inch to .045 inch across the picks. The HITBOX takes .023, .030, .035 and .039 inch wire, the AZZUNO 135A takes .030 and .035 inch wire, and the ANDELI drive rolls take .035 and .045 inch wire. The AZZUNO 200A takes .030 to .040 inch wire.

Do I need 220V for a combination welder?

Not for every pick. 4 of the 5 picks run on 110V/220V dual voltage, so they weld on a household outlet and step up on 220V. The AZZUNO 135A runs on 110V only. Check the input voltage on the listing against the outlet before buying.

Related: the multi-process welders hub, and the welders hub. Also see the best MIG welder. Also see the best welder for beginners. Also see the how to choose a MIG welder. Also see the best multi-process welder with AC TIG. Also see the best 4 in 1 welder.

More buying guides

TIG Welders ·

Can You TIG Weld with a Stick Welder?

A direct current stick welder can run scratch start TIG with an air-cooled torch, a manual gas valve, and pure argon on steel and…