Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Low Cost HVLP Spray Gun (2026): 5 Picks for Primer, Paint and Clear Coat

Five gravity feed HVLP spray guns for primer, paint and clear coat, compared on nozzles, cups, air use and controls.

Best Low Cost HVLP Spray Gun (2026): 5 Picks for Primer, Paint and Clear Coat
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1ENDOZER HVLP Spray Gun SetBest OverallENDOZER HVLP Spray Gun Set9.5/10View on Amazon
  2. 2BENTOHKLE HVLP Spray Gun KitFour NozzlesBENTOHKLE HVLP Spray Gun Kit9.4/10View on Amazon
  3. 3SRQLNTT 819 HVLP Spray Gun KitLowest Stated Air UseSRQLNTT 819 HVLP Spray Gun Kit9.5/10View on Amazon
  4. 4NEIKO 31207A HVLP Mini Spray GunMini PickNEIKO 31207A HVLP Mini Spray Gun9.4/10View on Amazon

A fender edge in primer, a cabinet door that needs a fresh coat, a bumper with a scuff to blend: each job wants paint laid down thin and even, with no runs and no dry spray at the edges. A best low cost hvlp spray gun earns its keep on that kind of work, moving a high volume of air at low pressure so more paint lands on the panel and less drifts past it. This guide compares gravity feed guns on what each listing states: nozzles, cups, air use and controls.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall ENDOZER HVLP Spray Gun Set: Three stainless nozzles, a 20 oz cup, a gauge, a quick adapter and a paint filter in the box. Check price on Amazon
  • Four Nozzles BENTOHKLE HVLP Spray Gun Kit: Four nozzles, a one-piece aluminum body and a cleaning kit. Check price on Amazon
  • Lowest Stated Air Use SRQLNTT 819 HVLP Spray Gun Kit: Stated air use of 3.0 to 3.9 cfm and working pressure of 2.0 to 3.5 bar, with three nozzles. Check price on Amazon
  • Mini Pick NEIKO 31207A HVLP Mini Spray Gun: A 1.0 mm nozzle, a 125 cc cup and stated 50 PSI for small work and touch-ups. Check price on Amazon

The machines

ENDOZER Professional HVLP Spray Gun Set Gravity

ENDOZER Professional HVLP Spray Gun Set Gravity

ENDOZER9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A gravity feed set with 1.4, 1.7 and 2.0 mm stainless nozzles, a 20 oz cup, a gauge and a quick adapter in the box.

Pros

  • Three stainless steel nozzles, 1.4, 1.7 and 2.0 mm, in the box
  • 20 oz, 600 cc gravity feed cup with a paint filter
  • Brass hood with a 15 hole design for uniform atomization
  • Air pressure gauge and quick adapter set included

Cons

  • No warranty term is stated
  • Working pressure and air use are not stated
  • Three nozzle sizes, one fewer than the four nozzle pick here
  • The maker states no latex paint use for this gun
819 HVLP Air Spray Gun Kits with 1.3/1.7/2.0 mm

819 HVLP Air Spray Gun Kits with 1.3/1.7/2.0 mm

SRQLNTT9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A three nozzle kit with stated working pressure, spray distance and air use, plus a disposable paint cup design.

Pros

  • Three nozzles, including 1.7 and 2.0 mm, for paint, primer and clear coat
  • Stated working pressure of 2.0 to 3.5 bar and spray distance of 200 to 300 mm
  • Stated air use of 3.0 to 3.9 cfm, the lowest stated figure here
  • Aluminum alloy body with a pure copper atomization cap and stainless nozzle and needle

Cons

  • No warranty term is stated
  • Disposable paint cup size is not stated
  • The disposable paint cup is a consumable, so each job uses a fresh cup
  • Inlet size is not stated
HVLP Spray Gun Kit with 1.4/1.7/2.0/2.5mm Nozzles

HVLP Spray Gun Kit with 1.4/1.7/2.0/2.5mm Nozzles

BENTOHKLE9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Four nozzles on a one-piece aluminum body, with a cleaning kit in the box.

Pros

  • Four nozzles, including 1.4, 1.7 and 2.0 mm, the most here
  • One-piece aluminum alloy body with a stainless steel nozzle
  • Cleaning kit included for maintenance
  • Lists car paint, wall repair, furniture refinishing, primer and clear coat

Cons

  • Working pressure and air use are not stated
  • Cup size and inlet size are not stated
  • No gauge is listed with the kit
  • Four nozzles mean four tips to clean after each job
NEIKO 31207A HVLP Mini Gravity Feed Air Spray

NEIKO 31207A HVLP Mini Gravity Feed Air Spray

NEIKO9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A mini gravity feed gun with a 1.0 mm nozzle, a 125 cc cup and stated 50 PSI working pressure for small work.

Pros

  • 1.0 mm stainless steel nozzle and needle for small work
  • Stated air pressure of 50 PSI and air use of 8.8 CFM
  • Three adjustments: pattern, material volume and air volume
  • 125 cc cup for small paint projects and quick touch-ups

Cons

  • Only a 1.0 mm nozzle, with no larger size for broad panels
  • 125 cc cup needs frequent refills on larger work
  • No gauge, filter or cleaning kit is listed in the box
  • Stated air use of 8.8 CFM needs a compressor that can feed it
Tosucs HVLP Spray Gun with 1.0mm Tip Air Spray Gun

Tosucs HVLP Spray Gun with 1.0mm Tip Air Spray Gun

Tosucs9.3/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1.0 mm tip gun with a 125 ml cup, three control valves, a filter and a brush in the box.

Pros

  • 1.0 mm stainless steel needle and nozzle for primer and small work
  • Three control valves for air pressure, paint flow and spray width
  • Filter and brush included in the box
  • 125 ml PVC cup, stated as resistant to falling

Cons

  • Only a 1.0 mm tip, with no larger size for broad panels
  • 125 ml cup needs frequent refills on larger work
  • Working pressure and air use are not stated
  • No gauge or quick adapter is listed in the box

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Nozzles Cup Working pressure Air use Inlet
ENDOZER HVLP Spray Gun Set 9.5/10 1.4, 1.7, 2.0 mm 20 oz, 600 cc Not stated Not stated 1/4 in NPT
SRQLNTT 819 HVLP Spray Gun Kit 9.5/10 Three sizes, including 1.7 and 2.0 mm Not stated 2.0-3.5 bar 3.0-3.9 cfm Not stated
BENTOHKLE HVLP Spray Gun Kit 9.4/10 Four sizes, including 1.4, 1.7 and 2.0 mm Not stated Not stated Not stated Not stated
NEIKO 31207A HVLP Mini Spray Gun 9.4/10 1.0 mm 125 cc 50 PSI 8.8 CFM 1/4 in NPS
Tosucs HVLP Spray Gun 1.0 mm 9.3/10 1.0 mm 125 ml Not stated Not stated Not stated

Treat the specs as maker ratings pulled straight from the listings; we gathered them on 19 November 2026.

Buying guide for the best low cost hvlp spray gun

Nozzle size

Nozzle size sets how much paint the gun can pass and how fine the coat lays. The sets here run from 1.0 mm tips on the mini guns to the largest tip on the BENTOHKLE, with the ENDOZER set covering 1.4 to 2.0 mm and the SRQLNTT set covering three sizes to 2.0 mm. Small tips suit primer and touch-up work; larger tips suit paint and clear coat. Match the tip to the coating, not to the size of the job alone.

Cup size and feed

Every gun here is gravity feed, with the cup on top of the gun. The ENDOZER cup holds 20 oz, 600 cc, and the NEIKO and Tosucs cups hold 125 cc and 125 ml. The SRQLNTT uses a disposable paint cup, and the BENTOHKLE cup size is not stated. A larger cup means fewer refills on a big panel, while a small cup keeps the gun handy for detail work.

Air pressure and air use

HVLP guns run on shop air, so the compressor has to keep up. The SRQLNTT states 2.0 to 3.5 bar working pressure and 3.0 to 3.9 cfm air use, with a spray distance of 200 to 300 mm. The NEIKO states 50 PSI and 8.8 CFM. The other three listings state no air figures, so check the compressor against the gun before buying.

Controls and cleanup

Three knobs show up across these guns: fluid or paint flow, pattern or fan width, and air volume. The ENDOZER, SRQLNTT, NEIKO and Tosucs all list those three adjustments in some form. For cleanup, the BENTOHKLE ships a cleaning kit, the Tosucs ships a brush, and the ENDOZER includes a paint filter. Take the gun apart after each job and clean the nozzle and needle before paint dries in them.

Use as directed. Spray paint in a ventilated space and wear a respirator rated for paint spray, plus eye protection. Keep the work away from open flame and sparks, and keep the compressor and hoses clear of the spray. Follow the paint maker’s directions for the coating you spray.

Before You Strike an Arc

  • Check the box on arrival: the ENDOZER set lists a gauge, a quick adapter set and a paint filter; the BENTOHKLE set lists a cleaning kit; the Tosucs set lists a filter and a brush.
  • Match the tip to the coating: the 1.0 mm guns here are mini guns for primer and touch-up work, while the sets with several nozzle sizes cover paint, primer and clear coat.
  • Check the air supply: the SRQLNTT lists 2.0 to 3.5 bar and 3.0 to 3.9 cfm, and the NEIKO lists 50 PSI and 8.8 CFM. Match the compressor to the gun before painting.
  • Fit the inlet before painting: the ENDOZER uses a 1/4 inch NPT inlet with a quick adapter, and the NEIKO uses a 1/4 inch NPS inlet.

FAQ for welders

What is a HVLP spray gun?

A HVLP spray gun is a paint gun that uses a high volume of air at low pressure to lay paint on a surface. The guns here are gravity feed air spray guns: paint sits in a cup on top of the gun and air from a compressor breaks it into a fine spray. The maker of the SRQLNTT kit spells the letters out as High Volume Low Pressure.

How does a HVLP spray gun work?

Compressed air enters through the inlet and meets paint at the nozzle, where the air breaks the paint into small droplets and carries them to the surface in a fan pattern. Fluid, pattern and air controls set how much paint flows, how wide the fan runs and how much air passes through. Because the pressure at the nozzle stays low, more paint lands on the surface and less drifts past as overspray.

What does HVLP spray gun mean?

HVLP stands for High Volume Low Pressure. It describes a gun that moves a large volume of air at low pressure, so paint atomizes without the high pressure of older spray guns. The SRQLNTT listing gives the full phrase, High Volume Low Pressure, in its description of the spraying technology.

How to set up and use a HVLP paint spray gun?

Fit the gun to the compressor through the inlet, fill the cup with the coating, and set the fluid, pattern and air controls to the maker’s directions. The SRQLNTT lists a working pressure of 2.0 to 3.5 bar and a spray distance of 200 to 300 mm, and the NEIKO lists 50 PSI. Hold the gun at the stated spray distance, move in steady passes, and clean the gun right after the job.

What solvent to use to clean HVLP spray guns?

No listing here names a solvent, so follow the paint maker’s directions for the coating you sprayed. The BENTOHKLE kit ships a cleaning kit, the Tosucs kit ships a brush, and the ENDOZER set includes a paint filter. Take the gun apart, clean the nozzle and needle, and let the parts dry before the next job.

Related: metal finishing, HVLP vs powder coating gun, best sandblasting gun, best air compressor for sandblasting, how to prep for powder coating and best high temp spray paint for metal.

Scoring, line by line

Each gun is scored on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. No listing here states a safety certification or a warranty term, so every gun here scores zero on those two criteria; the ranking comes from the other three.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
ENDOZER HVLP Spray Gun Set 9.5 30 21 21 0 0
SRQLNTT 819 HVLP Spray Gun Kit 9.5 29 21 20 0 0
BENTOHKLE HVLP Spray Gun Kit 9.4 28 20 21 0 0
NEIKO 31207A HVLP Mini Spray Gun 9.4 26 19 20 0 0
Tosucs HVLP Spray Gun 1.0 mm 9.3 24 19 20 0 0

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score.

More buying guides

Coating and Polishing ·

Best Hvlp Spray Gun Cleaning Kit (2026)

Five spray gun cleaning kits compared on piece count, brush types, needles, storage and the warranty each listing states.