Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Knife Handle Spacer Material (2026): 5 Picks for Custom Handles

Five knife handle spacer materials, from thin G10 accent sheets to assorted vulcanized fiber packs, compared on sheet size, thickness, colors and pack size.

Best Knife Handle Spacer Material (2026): 5 Picks for Custom Handles
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Kathfly G10 30-PieceBest OverallKathfly G10 30-Piece9.7/10View on Amazon
  2. 2Tinlade G10 20-PieceMost ColorsTinlade G10 20-Piece9.6/10View on Amazon
  3. 3Texas Knifemakers FiberWidest SheetsTexas Knifemakers Fiber9.5/10View on Amazon
  4. 4EZSMITH G10 WhiteThinnest SheetEZSMITH G10 White9.5/10View on Amazon

A knife handle comes together layer by layer, and the thin spacer between the scales is what turns a plain grip into a finished piece. When the spacer is too thick, too soft, or cut from the wrong stock, the handle looks off and feels wrong in the hand. This guide covers the best knife handle spacer material for makers who build their own handles, with spacer sheets scored on the figures the makers state.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Kathfly G10 30-Piece: 30 pieces in 8 colors, glass fiber and epoxy G10, waterproof and stable in high and low temperature. Check price on Amazon
  • Most Colors Tinlade G10 20-Piece: 10 colors with 2 pieces of each color, in sheets 6.3 x 2 x 0.04 inches. Check price on Amazon
  • Widest Sheets Texas Knifemakers Fiber: Sheets measure 5 x 10 inches, the widest here, in vulcanized fiber made from pure cotton. Check price on Amazon
  • Thinnest Sheet EZSMITH G10 White: A .030 inch white G10 sheet with an easy-to-polish surface for a fine accent line. Check price on Amazon

The machines

Kathfly 30 Pieces G10 Spacer Sheets 6.3 x 1.97 x

Kathfly 30 Pieces G10 Spacer Sheets 6.3 x 1.97 x

Kathfly9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 30-piece G10 spacer set in 8 colors, with sheets 6.3 x 1.97 x 0.04 inches, made from glass fiber cloth and epoxy resin.

Pros

  • 30 pieces in 8 colors, the largest pack here
  • Glass fiber cloth and epoxy resin, waterproof and fireproof per the maker
  • Sheets can be drilled, sawn, ground or polished to shape
  • Stable in high and low temperature, and resists shrinking and deforming

Cons

  • Brown and green come as 3 pieces each while the other colors come as 4
  • The 0.04 inch thickness gives a bolder accent line than the .030 inch EZSMITH sheet
  • The 1.14 lb listed item weight is the heaviest pack weight stated here
  • Eight colors in one pack means a maker who wants one color gets seven others too
Tinlade 20 Pcs G10 Spacer Sheet 6.3 x 2 x 0.04

Tinlade 20 Pcs G10 Spacer Sheet 6.3 x 2 x 0.04

Tinlade9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 20-piece G10 spacer set in 10 colors, with sheets 6.3 x 2 x 0.04 inches, for makers who want the widest color range here.

Pros

  • 10 colors, the widest color range here, with 2 pieces of each color
  • Sheets can be drilled, sawn, polished or ground to shape
  • Dense, stable, waterproof and lightweight per the maker
  • Each sheet is 6.3 x 2 inches, a size the maker calls proper for most handle making

Cons

  • Only 2 pieces of each color, so a maker who repeats one color runs out fast
  • The 0.04 inch thickness gives a bolder accent line than the .030 inch EZSMITH sheet
  • No warranty term is stated
  • 20 pieces is fewer than the 30 pieces in the Kathfly pack
16Pcs G10 Spacer Sheets

16Pcs G10 Spacer Sheets

Generic9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 16-piece G10 spacer set in 8 colors, with sheets 6.3 x 2 x 0.04 inches, made from epoxy resin and fiberglass composite.

Pros

  • 16 pieces in 8 colors for many projects
  • Epoxy resin and fiberglass composite, waterproof and heat-resistant per the maker
  • Sheets can be drilled, sanded, shaped and polished
  • Suits fixed blades, folding knives, tactical tools and custom scales per the maker

Cons

  • The 0.04 inch thickness gives a bolder accent line than the .030 inch EZSMITH sheet
  • No warranty term is stated
  • 16 pieces is fewer than the 30-piece Kathfly pack and the 20-piece Tinlade pack
  • A 6.3 inch sheet is shorter than the 12 inch EZSMITH sheet, so it covers less length per sheet
Texas Knifemakers Supply

Texas Knifemakers Supply

Texas Knifemakers Supply9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 8-piece vulcanized fiber spacer set in assorted colors, with sheets 5 x 10 x 0.04 inches, made from pure cotton pressed into a dense sheet.

Pros

  • Sheets measure 5 x 10 inches, the widest sheets here
  • Vulcanized fiber made from 100% pure cotton, densely pressed
  • Described as highly durable and easy to work
  • 0.5 lb listed item weight, the lowest pack weight stated here

Cons

  • 8 pieces is fewer than the 30-piece Kathfly pack
  • The 0.04 inch thickness gives a bolder accent line than the .030 inch EZSMITH sheet
  • Assorted colors means the buyer cannot choose the exact colors in the pack
  • Sheets are 5 x 10 inches, so a small handle needs the sheet cut down
EZSMITH G10 - Knife Handle Spacer Material

EZSMITH G10 - Knife Handle Spacer Material

EZSMITH9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A single white G10 spacer sheet, 3 x 12 x .030 inches, with an easy-to-polish surface for a fine white accent line.

Pros

  • .030 inch thickness, the thinnest sheet here, for a fine accent line
  • White color gives a clean contrast against dark scales
  • Resists compression, shrinking and liquid absorption per the maker
  • Easy-to-polish surface for a finished look

Cons

  • Single sheet in the pack, the smallest pack here
  • White only, with no color choice
  • The 3 inch width is narrower than the 5 inch Texas sheets
  • The .030 inch thickness suits a fine accent line, not a bold one

Spec sheet comparison

Model Gear Score Sheet size Thickness Pieces Colors Material Warranty
Kathfly G10 30-Piece 9.7/10 6.3 x 1.97 in 0.04 in 30 8 G10, glass fiber and epoxy Not stated
Tinlade G10 20-Piece 9.6/10 6.3 x 2 in 0.04 in 20 10 G10, epoxy resin Not stated
Generic G10 16-Piece 9.6/10 6.3 x 2 in 0.04 in 16 8 G10, epoxy and fiberglass Not stated
Texas Knifemakers Fiber 9.5/10 5 x 10 in 0.04 in 8 Assorted Vulcanized fiber, cotton Not stated
EZSMITH G10 White 9.5/10 3 x 12 in .030 in 1 White G10 Not stated

Treat the specs as maker ratings pulled straight from the listings; we gathered them on 21 November 2026.

Buying guide: best knife handle spacer material for your build

Sheet size

Sheet size decides how many handles one sheet covers and whether it fits the grip you are building. The Texas Knifemakers sheets measure 5 x 10 inches, the widest sheets here, while the EZSMITH sheet measures 3 x 12 inches. Kathfly sheets measure 6.3 x 1.97 inches, and the Tinlade and Generic sheets measure 6.3 x 2 inches. Check the sheet against the handle before cutting.

Thickness

Thickness sets the accent line the spacer draws between the scales. The EZSMITH sheet is .030 inch thick, the thinnest here, for a fine line. Kathfly, Tinlade, Texas and Generic sheets sit at 0.04 inch thick, which reads as a bolder line on the handle. Match the thickness to the look you want before you glue up the stack.

G10 or vulcanized fiber

G10 is glass fiber cloth set in epoxy resin, and the Kathfly maker states that makeup plainly. Vulcanized fiber is cotton pressed into a dense sheet, and the Texas Knifemakers fiber is 100% pure cotton, per the maker. G10 resists liquid absorption and holds its shape, per the EZSMITH and Kathfly makers, while vulcanized fiber is the older shop material for spacers. Pick the material that matches the handle you are building.

Colors and pack size

Color choice and pack size decide how many handles you can finish from one order. Tinlade offers 10 colors with 2 pieces of each color, the widest color range here. Kathfly offers 8 colors in a 30-piece pack, the largest pack here, while the Generic pack holds 16 pieces in 8 colors and the Texas pack holds 8 pieces in assorted colors. The EZSMITH sheet comes as a single white sheet, so it suits one handle with a clean white accent line.

Working the material

Every spacer here is meant to be cut and shaped with shop tools. Kathfly, Tinlade and Generic sheets can be drilled, sawn and polished to shape, per the makers. The EZSMITH sheet has an easy-to-polish surface, and the Texas fiber is described as easy to work. Dry-fit the spacer stack on the handle before gluing, and check the thickness and color against the scales.

Use as directed. Cutting, grinding and sanding spacer sheets throws dust and small chips, so wear eye protection and a dust mask, clamp the sheet before you cut, and keep fingers clear of the blade and the sander. Work in a ventilated space and clean up dust after cutting. See the Safety Disclaimer.

Before You Strike an Arc

  • Check the sheet size against the handle before cutting, and confirm the thickness matches the accent line you want.
  • Count the pieces and colors when the pack arrives, and set aside the sheets for the handle you are building.
  • Dry-fit the spacer between the scales and check the fit before gluing the stack.
  • Keep the work clamped while drilling or sanding, and wear eye protection and a dust mask.

FAQ for welders

How do I clean bone knife handles?

Wipe bone handles with a damp cloth and dry them at once. The spacer materials in this guide resist liquid: the EZSMITH G10 resists liquid absorption and the Kathfly G10 is waterproof, so the spacer line will not swell from a damp wipe. Avoid soaking bone handles.

How do I fix a loose knife handle?

A loose handle usually means a scale or spacer has shifted in the stack. Take the handle apart, check each spacer sheet for wear or a poor fit, and rebuild the stack with spacer material that matches the thickness of the sheets you removed. The sheets here are .030 inch and 0.04 inch thick, so match the thickness when you rebuild.

What are knife handles made out of?

Handle scales come in many materials, and the spacer sheets in this guide are G10, made from glass fiber cloth and epoxy resin, and vulcanized fiber, made from pure cotton pressed into a dense sheet. The spacer sits between the handle scales to add a contrast line, and its thickness sets how bold that line reads.

Is oak good for knife handles?

Oak is a wood that some makers use for handle scales, but this guide does not rank it: the spacer materials here are G10 and vulcanized fiber, not wood. If you want a wood handle, look for handle wood blanks made for knife scales, and check the blank size against the handle before buying.

Related: knife handle spacer material, best wood for knife handles, best stabilized wood knife scales, G10 vs Micarta knife scales, and best knife blanks full tang.

Scoring, line by line

Each spacer material is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. No safety listing or warranty term is stated for these spacer sheets, so every pick here scores zero on safety and warranty; the ranking comes from performance, build and value.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Kathfly G10 30-Piece 9.7 30 21 22 n/a 0
Tinlade G10 20-Piece 9.6 29 21 21 n/a 0
Generic G10 16-Piece 9.6 29 20 20 n/a 0
Texas Knifemakers Fiber 9.5 28 19 19 n/a 0
EZSMITH G10 White 9.5 28 21 15 n/a 0

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.

More buying guides