Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best High Carbon Steel Multi Tool Blades (2026)

Five multi-tool blade sets and kits compared on pack size, material, cutting width, mount and the jobs each one names.

Best High Carbon Steel Multi Tool Blades (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1LEILUO 50-Piece HCS SetBest OverallLEILUO 50-Piece HCS Set9.5/10View on Amazon
  2. 2EXKRAEFT 55-Piece KitMost PiecesEXKRAEFT 55-Piece Kit9.5/10View on Amazon
  3. 3Diablo Carbide 3-PackBest for MetalDiablo Carbide 3-Pack9.4/10View on Amazon
  4. 4LEILUO 15-Piece CRV SetBest Wood SetLEILUO 15-Piece CRV Set9.4/10View on Amazon

A dull blade on an oscillating tool turns a quick trim cut into a wrestling match, and the wrong blade for the metal in front of you just burns up. This guide compares multi-tool blade sets on pack size, material, cutting width, mount and the jobs each one names. The best high carbon steel multi tool blades here are the high-carbon steel sets and kits that cover wood, plastic and drywall, with titanium and carbide blades in the mix for metal.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall LEILUO 50-Piece HCS Set: 50 high-carbon steel blades in two widths, depth marks in inches and millimeters, and a universal mount with 4 bonus C-clip adapters. Check price on Amazon
  • Most Pieces EXKRAEFT 55-Piece Kit: 55 blades in 6 types, with 51 HCS blades for wood, 2 Japanese teeth blades and 2 titanium blades for metal and wood. Check price on Amazon
  • Best for Metal Diablo Carbide 3-Pack: Carbide teeth with a 1-1/4 inch cutting width and a 1-1/2 inch depth, plus a Black I.C.E. coating. Check price on Amazon
  • Best Wood Set LEILUO 15-Piece CRV Set: 15 identical CRV blades with double-row Japanese teeth for deep, clean wood cuts. Check price on Amazon

The machines

LEILUO 50Pcs Oscillating Saw Blades Universal

LEILUO 50Pcs Oscillating Saw Blades Universal

LEILUO9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 50-piece high-carbon steel set with 25 blades at 1-3/8 inches and 25 at 1-3/4 inches, depth marks in inches and millimeters, and a universal mount.

Pros

  • 50 blades in two widths, 25 at 1-3/8 inches and 25 at 1-3/4 inches
  • High-carbon steel with an electrophoretic black coating
  • Laser-etched depth marks in inches and millimeters
  • Universal quick-release mount with 4 bonus C-clip adapters

Cons

  • Not compatible with star.lock systems
  • Only two blade widths in the box
  • High-carbon steel only, no blade stated for metal
  • A 50-piece pack is built for high-volume work
55 PCS Titanium Multitool Blades

55 PCS Titanium Multitool Blades

EXKRAEFT9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 55-piece kit in 6 types: 51 HCS blades for wood, 2 Japanese teeth blades for wood and 2 titanium blades for metal and wood.

Pros

  • 55 blades in 6 types for wood, soft metal and plastic
  • Titanium-coated blades for hardwood, soft metal and non-hardened nails
  • Japanese teeth blades for fast wood cuts
  • Universal interface with 3 clip adapters, fits DeWalt, Bosch, Fein, Milwaukee and Ryobi

Cons

  • Not suitable for cutting screws and bolts
  • Only 2 titanium blades in a 55-piece kit
  • 51 of the 55 blades are HCS for wood
  • Stated fit covers over 98% of oscillating tools, not all of them
Diablo Amped Steel Demon Universal Fit Carbide

Diablo Amped Steel Demon Universal Fit Carbide

Diablo9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3-pack of carbide oscillating blades with a 1-1/4 inch cutting width and 1-1/2 inch depth, for metal, with a Black I.C.E. coating.

Pros

  • Carbide teeth for metal cutting
  • 1-1/4 inch cutting width and 1-1/2 inch depth
  • Black I.C.E. coating keeps the blade cool
  • A 30 day limited term

Cons

  • Only 3 blades in the pack
  • A 1-1/4 inch width for wide cuts
  • No blade in the pack for wood or plastic
  • A 1-1/2 inch depth for deep cuts
LEILUO 15Pcs Oscillating Tool Blades Wood

LEILUO 15Pcs Oscillating Tool Blades Wood

LEILUO9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 15-piece set of identical CRV blades with double-row Japanese teeth, for deep wood cuts with a clean finish.

Pros

  • 15 identical blades, so a fresh blade is always ready
  • Double-row Japanese teeth for wood
  • Precision-ground teeth for clean, tear-free finishes
  • Fits DeWalt, Makita, Milwaukee and Dremel, with C-clip adapters for Dremel

Cons

  • Wood and plastics only, no metal cutting
  • Do not use on hidden iron nails or metal screws
  • Not compatible with star.lock, star.lock Plus or star.lock Max
  • No stated warranty term
6PCS Oscillating Saw Blades Kit

6PCS Oscillating Saw Blades Kit

MFJL9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6-piece high-carbon steel kit for wood, plastic and soft metals, with built-in depth markings and a universal fit.

Pros

  • 6 high-carbon steel blades for wood, plastic and soft metals
  • Built-in depth markings for accurate cuts
  • Plunge cutting design for insertion at any point
  • Universal compatibility with most oscillating multi-tools

Cons

  • Only 6 blades in the kit
  • No stated warranty term
  • Soft metals only, no stated rating for hardened metal
  • Universal fit is stated for most tools, not all

Spec sheet comparison

Blade Gear Score Pieces Material Cutting width Use
LEILUO 50-Piece HCS Set 9.5/10 50 High-carbon steel 1-3/8 in and 1-3/4 in Wood, plastic, drywall
EXKRAEFT 55-Piece Kit 9.5/10 55 HCS and titanium Not stated Wood, soft metal, plastic
Diablo Carbide 3-Pack 9.4/10 3 Carbide 1-1/4 in Metal
LEILUO 15-Piece CRV Set 9.4/10 15 CRV Not stated Wood and plastic
MFJL 6-Piece HCS Kit 9.4/10 6 High-carbon steel Not stated Wood, plastic, soft metal

These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 21 November 2026.

Buying guide: best high carbon steel multi tool blades

Blade material

High-carbon steel is the workhorse here: the LEILUO 50-piece set and the MFJL kit are HCS, and 51 of the 55 EXKRAEFT blades are HCS for wood. The LEILUO 15-piece set uses CRV with double-row Japanese teeth, the EXKRAEFT kit adds 2 titanium blades for metal and wood, and the Diablo 3-pack uses carbide teeth for metal. Match the material to the job: HCS and CRV for wood and plastic, titanium for soft metal and non-hardened nails, carbide for metal.

Pack size and width

Pack sizes run from 3 blades in the Diablo pack to 55 in the EXKRAEFT kit, with 50 in the LEILUO bulk set, 15 in the LEILUO CRV set and 6 in the MFJL kit. Widths are stated for two sets: the LEILUO 50-piece set holds 1-3/8 inch and 1-3/4 inch blades, and the Diablo pack cuts 1-1/4 inches wide at 1-1/2 inches deep. A big pack suits high-volume trim and drywall work, while a small kit suits a homeowner with a few cuts to make.

Fit and mount

Every set here states a universal mount, but the fine print differs. The LEILUO 50-piece set fits DeWalt, Milwaukee, Makita, Ryobi and Craftsman with 4 bonus C-clip adapters, and it is not compatible with star.lock systems. The LEILUO 15-piece set fits DeWalt, Makita, Milwaukee and Dremel, with C-clip adapters for Dremel, and it is not compatible with star.lock, star.lock Plus or star.lock Max. The EXKRAEFT kit fits DeWalt, Bosch, Fein, Milwaukee and Ryobi with 3 clip adapters. The Diablo pack is adapter-free and fits most oscillating tools.

What to cut and what to avoid

Cut wood, plastic and drywall with the HCS sets, and add the EXKRAEFT titanium blades or the Diablo carbide pack for metal. The LEILUO 15-piece set is built for wood and plastics only, and the maker warns against hidden iron nails or metal screws. The EXKRAEFT kit is not suitable for cutting screws and bolts. Check the mount and the material before the first cut, and keep a fresh blade ready when the edge goes dull.

Use as directed. Clamp the work, keep hands clear of the blade path, and wear eye protection. Check that the blade mount matches the tool before switching it on, and never force a blade through material it is not rated to cut. See our Safety Disclaimer.

FAQ for welders

Do high carbon steel blades rust?

High-carbon steel can rust, and the LEILUO 50-piece set answers that with an electrophoretic black coating stated for wear resistance and rust protection. The EXKRAEFT kit uses titanium-coated blades for metal and wood.

Will these blades fit my oscillating tool?

All five sets state a universal mount, but check the fine print. The LEILUO sets are not compatible with star.lock systems, and the LEILUO 15-piece set is also not compatible with star.lock Plus or star.lock Max. The EXKRAEFT kit states fit with over 98% of oscillating tools, and the Diablo pack is adapter-free for most tools. Dremel tools need the included C-clip adapters on the LEILUO 15-piece set.

Can I cut metal with these blades?

Yes, with the right blades: the Diablo carbide pack is made for metal, and the EXKRAEFT kit includes 2 titanium blades for metal and wood. The LEILUO 50-piece set is stated for timber, plastic and drywall, and the MFJL kit for wood, plastic and soft metals. The LEILUO 15-piece set is built for wood and plastics only. The EXKRAEFT kit is not suitable for cutting screws and bolts.

How many blades do I need?

That depends on the work. The Diablo pack holds 3 blades and the MFJL kit holds 6, for small jobs. The LEILUO 15-piece set holds 15 identical blades for trim and flooring work. The LEILUO 50-piece set and the EXKRAEFT 55-piece kit suit high-volume work, with 50 and 55 blades in the box.

What is the difference between HCS, CRV and carbide blades?

High-carbon steel is the standard blade steel here, in the LEILUO 50-piece set, the MFJL kit and 51 of the EXKRAEFT blades. CRV is the steel in the LEILUO 15-piece set, with double-row Japanese teeth for wood. Carbide is the tooth material in the Diablo 3-pack, made for metal. Titanium appears as a coating on 2 EXKRAEFT blades for metal and wood.

Related: best oscillating multi tool, best oscillating multi tool metal cutting blade, best oscillating multi tool blades extra long, and the knife making and casting hub. Also see our oscillating tool vs angle grinder. Also see our best high carbon steel utility knife blades.

Scoring, line by line

Each blade is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. Blades here state no safety certification, so every blade here scores zero on that criterion; the ranking comes from the other four.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
LEILUO 50-Piece HCS Set 9.5 30 21 22 0 0
EXKRAEFT 55-Piece Kit 9.5 29 21 22 0 0
Diablo Carbide 3-Pack 9.4 29 21 18 0 1
LEILUO 15-Piece CRV Set 9.4 28 20 20 0 0
MFJL 6-Piece HCS Kit 9.4 27 19 19 0 0

Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score.

More buying guides