Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best High Carbon Spring Steel (2026): 4 Knife-Making Picks

Four high carbon spring steel picks for knife making, compared on grade, thickness, size, pack count, and stated heat treatment.

Best High Carbon Spring Steel (2026): 4 Knife-Making Picks
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Patriot Steel 5160Best OverallPatriot Steel 51609.7/10View on Amazon
  2. 2XIOBTQT 5160 2-PackBest 5160 Two-PackXIOBTQT 5160 2-Pack9.6/10View on Amazon
  3. 3Yampos 1095 5-PackBest 1095 Five-PackYampos 1095 5-Pack9.6/10View on Amazon
  4. 4GUXVFQ 1095 Shim SetBest Shim StockGUXVFQ 1095 Shim Set9.5/10View on Amazon

A blade starts as a flat bar on the bench, and the steel in that bar decides what the finished knife can do. The maker cuts a profile, grinds a bevel, and heat treats the blank, and every step works better when the steel grade and the bar size suit the blade. This guide compares the best high carbon spring steel for knife making, bar by bar, on grade, thickness, size, pack count, and stated heat treatment.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Patriot Steel 5160: USA-milled 5160, 2 inches wide, 0.262 inch thick, 36 inches long, for knife and sword making. Check price on Amazon
  • Best 5160 Two-Pack XIOBTQT 5160 2-Pack: Two annealed 5160 blanks, 12 by 1.5 by 1/4 inches, with 0.7-0.9% chromium and oil quenching. Check price on Amazon
  • Best 1095 Five-Pack Yampos 1095 5-Pack: Five annealed 1095 bars, 12 by 1.5 by 1/8 inches, for knife making, springs, and fabrication. Check price on Amazon
  • Best Shim Stock GUXVFQ 1095 Shim Set: Six blue tempered 1095 shim sheets, 6 inches wide, 7.87 inches long, in six thicknesses. Check price on Amazon

The machines

Patriot Steel 5160 High Carbon Knife & Sword

Patriot Steel 5160 High Carbon Knife & Sword

Patriot Steel9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

USA-milled 5160 steel in a single 36-inch bar, 2 inches wide and 0.262 inch thick, made for knife and sword making and forging by pros and hobbyists.

Pros

  • USA-milled 5160 steel, made in the USA
  • 36-inch length for knife and sword making
  • 2-inch width and 0.262-inch thickness stated
  • Small-batch production with rigorous inspections

Cons

  • One bar per order, so no spare blank
  • No warranty term is stated
  • 0.262-inch thickness is the thickest stated here
  • Annealed state is not stated
2 Pack 5160 Steel-12"x1.5"x1/4"-Hot Rolled High

2 Pack 5160 Steel-12"x1.5"x1/4"-Hot Rolled High

XIOBTQT9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Two annealed 5160 blanks, each 12 by 1.5 by 1/4 inches, hot rolled with clean edges, oil quenching and tempering, and an anti-rust oil coating.

Pros

  • Two precision-cut blanks with clean edges
  • Annealed state for easy machining, oil quenching and tempering
  • 0.7-0.9% chromium stated for toughness and edge retention
  • Oil paper and anti-rust oil coating for protection

Cons

  • Only 12-inch lengths, so longer blades need a longer bar
  • 1/4-inch thickness is thicker than the 1/8-inch bars
  • Two blanks only in the pack
  • No warranty term is stated
Yampos 5 Pack 1095 High Carbon Steel Flat Bar

Yampos 5 Pack 1095 High Carbon Steel Flat Bar

Yampos9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Five annealed 1095 flat bars, each 12 by 1.5 by 1/8 inches, hot rolled and unfinished, for knife making, springs, tools and fabrication.

Pros

  • Five bars in one pack
  • Annealed 1095, easier to cut, drill and shape
  • Suited to cutting, welding, grinding, drilling and bending
  • 12 by 1.5 by 1/8 inch size stated for each bar

Cons

  • 1/8-inch thickness is the thinnest knife blank here
  • No weight is stated
  • Welding needs preheating and post-weld heat treatment
  • Only one size, 12 by 1.5 by 1/8 inches
Spring Steel 1095 Shim Sheet Assortment

Spring Steel 1095 Shim Sheet Assortment

GUXVFQ9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Six blue tempered 1095 shim sheets, 6 inches wide and 7.87 inches long, in thicknesses from 0.004 to 0.03 inch, for shims, gaskets and machine work.

Pros

  • Six thicknesses from 0.004 to 0.03 inch in one assortment
  • Blue tempered polished spring steel
  • Can be cut or welded to requirement
  • 6-inch width and 7.87-inch length stated for each sheet

Cons

  • Thin shim stock, not knife blank thickness
  • 6-inch width and 7.87-inch length are short for blades
  • Made for shims and gaskets, not for forging blades
  • Supplied blue tempered, not in the annealed state

Best high carbon spring steel: how the four compare

Model Gear Score Steel grade Thickness Size Pack count Warranty
Patriot Steel 5160 9.7/10 5160 0.262 in 2 x 36 in 1 Not stated
XIOBTQT 5160 2-Pack 9.6/10 5160 1/4 in 12 x 1.5 in 2 Not stated
Yampos 1095 5-Pack 9.6/10 1095 1/8 in 12 x 1.5 in 5 Not stated
GUXVFQ 1095 Shim Set 9.5/10 1095 0.004-0.03 in 6 x 7.87 in 6 Not stated

Treat the specs as maker ratings pulled straight from the listings; we gathered them on 21 November 2026.

Buying guide: best high carbon spring steel for knife making

5160 or 1095

Two grades cover the four picks here. The Patriot and XIOBTQT bars are 5160 steel, and the Yampos bars and GUXVFQ sheets are 1095 steel. The XIOBTQT maker states 0.7-0.9% chromium for its 5160, and the Yampos maker states its 1095 gives higher hardness, better edge retention, and superior wear resistance than mild steel. Both grades appear in knife making stock here, and the choice sits with the bar size and the work planned, not with the grade alone.

Thickness and size

Thickness runs from shim thin to a quarter inch and more. The GUXVFQ sheets run from 0.004 inch to 0.03 inch, the Yampos bars are 1/8 inch thick, the XIOBTQT blanks are 1/4 inch thick, and the Patriot bar is 0.262 inch thick. Length runs from 7.87 inches on the shim sheets to 36 inches on the Patriot bar, with the XIOBTQT and Yampos bars at 12 inches long. Width runs from 1.5 inches on the knife blanks to 6 inches on the shim sheets, and the Patriot bar is 2 inches wide. Match the thickness to the blade, since a thin shim sheet cannot serve as a knife blank.

Annealed or tempered

The XIOBTQT blanks and the Yampos bars arrive in the annealed state, and the maker states that the annealed state makes the steel easier to machine, cut, drill, and shape. The GUXVFQ sheets arrive blue tempered and polished, which suits shim work and machine fitting. The Patriot bar does not state an annealed or tempered state, so its machining ease is not stated. Check the stated state before ordering, since it decides how the steel cuts on arrival.

Heat treatment and welding

The XIOBTQT blanks suit oil quenching and tempering, and the Yampos bars can be heat treated to full hardness once fabrication is done. For welding, the Yampos maker recommends preheating and post-weld heat treatment, and the GUXVFQ sheets can be cut or welded to requirement. The Patriot bar does not state a heat treatment, and the XIOBTQT blanks do not state welding, so check the stated processes against the work planned. No heat treat recipe is given here beyond what each maker states.

What arrives in the box

Pack counts differ across the four picks. The XIOBTQT order holds two blanks, the Yampos order holds five bars, the Patriot order holds one bar, and the GUXVFQ order holds six shim sheets. The XIOBTQT blanks ship with oil paper and an anti-rust oil coating, and the Yampos bars ship with a clean, unfinished surface. Check the count on arrival, since a single bar suits one blade while a five bar pack suits a run of small blades.

Use as directed. Grinding and cutting steel throws sparks and sharp chips, so wear eye and face protection, clamp the work, and keep guards in place. Heat treatment needs strong ventilation and dry tools and molds, with a full face shield and leather PPE, and never melt unknown or sealed scrap. See the grinding wheel safety guide.

Before You Strike an Arc

  • Check each bar against its stated size before cutting, since the four picks run from shim thin to 0.262 inch thick.
  • Confirm the steel grade on the bar matches the grade ordered, 5160 or 1095.
  • Wipe the anti-rust oil coating from the XIOBTQT blanks before shaping.
  • Keep tools and molds dry for heat treatment, and work with strong ventilation.
  • Wear a full face shield and leather PPE for heat treatment.

FAQ for welders

What is high carbon spring steel?

High carbon spring steel is steel stock sold for springs, tools, and knife making. The picks here use 5160 and 1095 grades, supplied as flat bars, blanks, and shim sheets. The 5160 bars suit forging and stock removal, and the 1095 bars suit knife making, tool building, and springs.

How thick is the steel in this guide?

The GUXVFQ sheets run from 0.004 inch to 0.03 inch thick. The Yampos bars are 1/8 inch thick, the XIOBTQT blanks are 1/4 inch thick, and the Patriot bar is 0.262 inch thick. The thinnest stock here is shim stock, not knife blank stock.

Which steel here suits a first knife blank?

The XIOBTQT 2-pack suits a first blank, with two annealed 5160 blanks, clean edges, and oil quenching and tempering. The Yampos 5-pack also suits a first blank, with five annealed 1095 bars that are easier to cut, drill, and shape. Both arrive annealed, so shaping starts from a soft state.

Can this steel be welded?

The Yampos maker recommends preheating and post-weld heat treatment for welding, and the GUXVFQ sheets can be cut or welded to requirement. The XIOBTQT blanks and the Patriot bar do not state welding, so the stated welding guidance covers two of the four picks.

What arrives with each order?

The XIOBTQT order holds two blanks, the Yampos order holds five bars, the Patriot order holds one bar, and the GUXVFQ order holds six shim sheets. The XIOBTQT blanks ship with oil paper and an anti-rust oil coating, while the Yampos bars ship with a clean, unfinished surface.

Related: best high carbon steel for knife making, best knife blanks full tang, best belt grinder for knife making, best oil for carbon steel knife, and the knife making hub. Also see our what is the best knife steel and the knife casting category.

Scoring, line by line

Each steel pick is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. Spring steel stock has no electrical safety listing to state, so every pick here scores zero on that criterion; the ranking comes from the other four.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Patriot Steel 5160 9.7 32 22 21 n/a 0
XIOBTQT 5160 2-Pack 9.6 30 21 21 n/a 0
Yampos 1095 5-Pack 9.6 28 19 21 n/a 0
GUXVFQ 1095 Shim Set 9.5 26 20 20 n/a 0

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.

More buying guides