Best Knife Blanks for Knife Making (2026): 5 Picks for Custom Handles
Five knife blanks in Damascus, stainless, carbon and D2 steel, compared on overall length, blade length, steel, tang and hardness.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallMega Blades MB-72709.6/10View on Amazon - 2
Best Stainless Drop PointSZCO Drop Point BL-77099.6/10View on Amazon - 3
Best DamascusJayger Damascus B1309.6/10View on Amazon - 4
Hardest Steel StatedZaby ZB-7254 D29.5/10View on Amazon
A blank saves the maker from forging and profiling a blade from bar stock: the shape, the edge and the tang are already formed, and the work left is the handle. This guide covers the best knife blanks for knife making, blanks in Damascus, stainless and carbon steel, compared on what each listing states: overall length, blade length, steel, tang and hardness.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall Mega Blades MB-7270: A 9 inch hand forged carbon steel blank with a 4.5 inch blade, full tang and a 4.5 inch handle area. Check price on Amazon
- Best Stainless Drop Point SZCO Drop Point BL-7709: An 8.5 inch stainless blank with a 4 inch blade, a 4.38 inch handle section, a brass guard and a lanyard hole. Check price on Amazon
- Best Damascus Jayger Damascus B130: An 8.66 inch hand forged Damascus blank, heat treated and pre-sharpened, with a 3.93 inch edge. Check price on Amazon
- Hardest Steel Stated Zaby ZB-7254 D2: A hand forged D2 steel blank, heat treated to 58-60 HRC, the only hardness figure stated here. Check price on Amazon
The machines

Mega Blades MB-7270 Handmade Carbon Steel Hunting
A 9 inch hand forged carbon steel blank with a 4.5 inch blade and a 4.5 inch handle area, full tang, for a custom handle.
Pros
- Hand forged carbon steel with a 4.5 inch blade
- Full tang with a 4.5 inch handle area for handle scales
- 9 inch overall length, the longest here
- Stated weight of 0.5 lb
Cons
- No hardness figure is stated
- No blade thickness is stated
- No handle scales, pins or sheath are stated as included
- No rust resistance is stated for the carbon steel

SZCO Drop Point Blank Blade 8.5" for Custom Knife
An 8.5 inch stainless drop point blank with a 4 inch blade, a 4.38 inch handle section, a brass guard and a lanyard hole.
Pros
- Stainless steel drop point blade with a detailed pattern
- Full tang with a 4.38 inch blank handle section
- Brass guard and a built-in lanyard hole
- 8.5 inch overall length suits a compact fixed blade
Cons
- No hardness figure is stated
- No blade thickness is stated
- No handle scales, pins or sheath are stated as included
- A 4 inch blade, shorter than the 4.5 inch blades here

Jayger Handmade Bavarian Damascus Blade Blank
An 8.66 inch hand forged Damascus blank with a 3.93 inch edge, heat treated and pre-sharpened, ready for a custom handle.
Pros
- Hand forged Damascus steel from a single billet with a layered wave pattern
- Heat treated and pre-sharpened, ready for a handle
- A 3.93 inch tang to fit handle scales around
- Each blank has a unique layered pattern
Cons
- A 3.93 inch edge, the smallest edge length here
- No hardness figure is stated
- Tang type is not stated, only its 3.93 inch length
- No handle material, pins or sheath are stated as included

ZabyKnives ZB-7254 Handmade D2 Steel knife blank
A hand forged D2 steel blank, heat treated to 58-60 HRC, full tang, for a hunting or skinning knife.
Pros
- D2 steel, hand forged and heat treated
- Hardness of 58-60 HRC stated, the only hardness figure here
- Full tang drop point for hunting and skinning
- Maker claims a long lasting sharp edge
Cons
- No overall length, blade length or width is stated
- No blade thickness is stated
- Included components are stated as nothing, so handle scales, pins and sheath are all separate
- No warranty term is stated

SZCO Supplies Tiger Skinner Blade Blank Knife
A 6.5 inch stainless clip point skinner blank with a 4.5 inch blade, 4 mm thickness and a brass guard.
Pros
- 4 mm blade thickness stated
- Stainless steel treated for edge retention and rust resistance, per the maker
- Clip point tip with a brass guard
- 6.5 inch overall length, the smallest here, suits a compact handle
Cons
- A 1/2 inch push tang, not a full tang, so handle scales need a different fit
- No hardness figure is stated
- No handle material or sheath is stated as included
- Smallest overall length here at 6.5 inches, which limits handle size
Spec sheet comparison
| Model | Gear Score | Overall length | Blade length | Steel | Tang | Hardness | Warranty |
|---|---|---|---|---|---|---|---|
| Mega Blades MB-7270 | 9.6/10 | 9 in | 4.5 in | Carbon steel | Full tang | Not stated | None stated |
| SZCO Drop Point BL-7709 | 9.6/10 | 8.5 in | 4 in | Stainless steel | Full tang | Not stated | None stated |
| Jayger Damascus B130 | 9.6/10 | 8.66 in | 3.93 in | Damascus steel | 3.93 in tang | Not stated | None stated |
| Zaby ZB-7254 D2 | 9.5/10 | Not stated | Not stated | D2 steel | Full tang | 58-60 HRC | None stated |
| SZCO Tiger Skinner BL-7823 | 9.5/10 | 6.5 in | 4.5 in | Stainless steel | 1/2 in push tang | Not stated | None stated |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 21 November 2026.
Buying guide: best knife blanks for knife making
Steel type
Damascus, stainless, carbon and D2 steel all appear here. The Jayger is Damascus steel, hand forged from a single billet with a layered wave pattern. The SZCO blanks are stainless steel, and the Tiger Skinner listing states its steel is treated for edge retention and rust resistance. The Mega Blades blank is hand forged carbon steel, and the Zaby blank is D2 steel. Pick the steel by what the listing states, not by habit: only the Zaby states a hardness figure.
Tang
Full tang appears on the SZCO drop point, the Mega Blades and the Zaby. The Tiger Skinner states a 1/2 inch push tang instead, which takes a different handle fit. The Jayger states a tang length of 3.93 inches but no tang type, so check the tang against the handle plan before ordering.
Blade length and overall length
Overall lengths run from 6.5 to 9 inches, and blade lengths run from 3.93 to 4.5 inches, where the listings state them. The Zaby listing states no overall length or blade length at all, so its size cannot be checked against a handle plan before ordering. Match the overall length to the handle you plan to fit, and check the stated length twice where a listing gives a second figure.
Hardness
Only the Zaby states a hardness figure, 58-60 HRC, and it also states a heat treatment. The Jayger states a heat treatment with no hardness figure, and the other listings state neither. A stated hardness figure is the only checkable number here for edge holding, so treat the rest as unstated rather than assuming a figure.
Handle fit
Handle areas run from 4.38 to 4.5 inches where the listings state them, and the SZCO blanks add a brass guard, with the drop point adding a lanyard hole. No listing here states handle scales in the box, and the Zaby states its included components as nothing, so plan handle material, pins and a sheath as separate parts. Check the tang length and the handle area against the scales you plan to use.
Use as directed. Wear eye and face protection when grinding or shaping a blank, clamp the work, keep guards in place and keep gloves away from rotating parts. Work with strong ventilation, keep tools and molds dry near heat, and never melt unknown or sealed scrap. Check the stated length and tang before ordering, since a blank made for a given handle plan may not fit another.
Before You Strike an Arc
- Check the blank on arrival against the stated overall length, blade length and tang before fitting handle scales.
- Dry fit the handle scales and pins before bonding anything, and check the tang length against the handle plan.
- Wear eye and face protection for grinding and shaping, clamp the work, and keep guards in place.
- Keep gloves away from rotating parts on grinders and belt sanders.
- Work with strong ventilation and keep a fire extinguisher within reach when grinding steel.
For more options, see our knife casting guides.
FAQ for welders
What is a knife blank?
A knife blank is a blade with its profile, edge and tang already formed, sold without a handle. The Jayger listing puts it plainly: add a custom handle and it is ready for finishing. A blank suits a maker who wants to shape the handle and finish the knife without forging the blade.
Which steel should I pick for a new maker?
Pick by what the listing states. The stainless SZCO blanks state rust resistance, the Zaby D2 blank states a hardness of 58-60 HRC, the Mega Blades carbon steel blank states a hand forged build, and the Jayger Damascus blank states a layered pattern and a heat treatment. No listing here states a full set of steel figures, so compare the stated figures and accept what is missing.
Full tang or push tang: which suits a new maker?
A full tang gives a handle area to pin scales to, and the SZCO drop point, the Mega Blades and the Zaby all state one, with handle areas of 4.38 and 4.5 inches where stated. The Tiger Skinner states a 1/2 inch push tang instead, which takes a different handle fit. For a new maker, a stated full tang with a stated handle area is the easier plan to follow.
Do these knife blanks come sharp?
Only the Jayger listing states that its blank is pre-sharpened. The other listings state no edge condition, so plan to finish the edge yourself or have it finished. Check the edge on arrival before fitting the handle, since sharpening is easier with the tang exposed.
What else do I need to finish a knife blank?
Handle scales, pins or fasteners, and a sheath are the usual parts, and none of the listings here states handle scales in the box. The Zaby listing states its included components as nothing, so treat every part beyond the blank as separate. Handle screws, fasteners, spacer material and wood scales are covered in the related guides below.
Related: knife handle screws, knife handle fasteners, knife handle spacer material, wood for knife handles, knife blanks full tang, high carbon steel for knife making, polishing kit for knife blades, oil for carbon steel knife, handmade leather knife sheath, buffing wheel for knife making, stabilized wood knife scales, what is the best knife steel, and knife making parts.
Scoring, line by line
Each blank is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. Knife blanks carry no safety listing in these listings, so every blank here scores zero on safety, and no listing here states a warranty term, so every blank scores zero on warranty; the ranking comes from performance, build and value.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Mega Blades MB-7270 | 9.6 | 30 | 21 | 21 | n/a | 0 |
| SZCO Drop Point BL-7709 | 9.6 | 29 | 21 | 21 | n/a | 0 |
| Jayger Damascus B130 | 9.6 | 28 | 21 | 20 | n/a | 0 |
| Zaby ZB-7254 D2 | 9.5 | 28 | 20 | 19 | n/a | 0 |
| SZCO Tiger Skinner BL-7823 | 9.5 | 26 | 19 | 20 | n/a | 0 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.




