Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Inverter Plasma Cutter (2026): 5 Cutters Compared

Inverter plasma cutters compared by output, clean and max cut, voltage, pilot arc, controls and warranty, for home, farm and shop cutting.

Best Inverter Plasma Cutter (2026): 5 Cutters Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1SILATU 85A CNC CutterBest OverallSILATU 85A CNC Cutter9.5/10View on Amazon
  2. 2Bestarc 50A CutterBest WarrantyBestarc 50A Cutter9.5/10View on Amazon
  3. 3VEVOR 65A CutterBest Cut RangeVEVOR 65A Cutter9.5/10View on Amazon
  4. 4Reboot 60A CutterBest LightweightReboot 60A Cutter9.5/10View on Amazon
  5. 5SILATU 55A CutterBest BeginnerSILATU 55A Cutter9.5/10View on Amazon

When a cracked mower deck waits on the bench and the patch panel needs a clean edge, the best inverter plasma cutter slices plate without dragging a grinder through the whole job. We compared inverter plasma cutters by output, clean and max cut, voltage, controls and warranty terms, using only what each listing publishes.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall SILATU 85A CNC Cutter: 85A CNC-ready cutter with blowback pilot arc, 60% duty cycle and 1-year warranty Check price on Amazon
  • Best Warranty Bestarc 50A Cutter: 2 Year Manufacturer warranty with 1/2-inch clean cuts and mesh cutting Check price on Amazon
  • Best Cut Range VEVOR 65A Cutter: 65A output with 3/4-inch max cut at 220V and adjustable PA and PT times Check price on Amazon
  • Best Lightweight Reboot 60A Cutter: 10 lb synergic cutter with 5/8-inch max cut and automatic shutdown Check price on Amazon
  • Best Beginner SILATU 55A Cutter: 55A cutter with AG60P consumables and 1-year warranty Check price on Amazon

The machines

SILATU 85A CNC Plasma Cutter Machine

SILATU 85A CNC Plasma Cutter Machine

SILATU9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 85A CNC-ready plasma cutter with non-HF blowback pilot arc, 60% duty cycle and dual voltage for professional cutting.

Pros

  • 85A output with 35mm max thickness at 85A on 220V
  • CNC-ready with 2-pin arc voltage and 5-pin signal connectors
  • Non-HF blowback pilot arc, no high-frequency interference
  • Automatic voltage detection for 110V and 220V inputs

Cons

  • Straight CNC torch is optional, not standard.
  • Air compressor is purchased separately.
  • No safety listing is stated.
Bestarc 50A Plasma Cutter Machine, Pilot Arc

Bestarc 50A Plasma Cutter Machine, Pilot Arc

bestarc9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 50A dual-voltage plasma cutter with pilot arc, LED display and mesh cutting for home, farm and shop work.

Pros

  • 1/2-inch clean cut and 2/3-inch max cut
  • Pilot arc starts without touching rusted, painted or dirty metal
  • Air sensor shows pressure on the front panel
  • 2-year manufacturer warranty is stated

Cons

  • Air compressor is purchased separately.
  • No duty cycle is stated.
  • No safety listing is stated.
  • Breaker sizes in the bullets are unclear.
VEVOR Plasma Cutter 65A Pilot Arc 110V/220V IGBT

VEVOR Plasma Cutter 65A Pilot Arc 110V/220V IGBT

VEVOR9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 65A dual-voltage plasma cutter with non-touch pilot arc, digital display and adjustable PA and PT times for garage and repair work.

Pros

  • 65A output with 3/4-inch max cut at 220V
  • Clean cuts to 1/2 inch at 110V and 9/16 inch at 220V
  • Adjustable PA time 0.1 to 3 seconds and PT time 1 to 6 seconds
  • Built-in overheat and overload protection

Cons

  • No warranty term is stated.
  • No UL or ETL listing is stated.
  • No air pressure figure is stated.
Reboot 60A Plasma Cutter, Large LED Display

Reboot 60A Plasma Cutter, Large LED Display

Reboot9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 60A synergic plasma cutter with a large LED display, 2T and 4T modes and a built-in air regulator for beginners and DIY use.

Pros

  • 60A output with 5/8-inch max cut at 240V
  • 1/2-inch clean cut at 35A on 120V with 50 PSI
  • Built-in overheat and overload protection with automatic shutdown
  • 10 lb weight with an ergonomic handle for job-site moves

Cons

  • No warranty term is stated.
  • No UL or ETL listing is stated.
  • No pilot arc is stated.
  • No duty cycle is stated.
SILATU 55A Plasma Cutter Machine

SILATU 55A Plasma Cutter Machine

SILATU9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 55A dual-voltage plasma cutter with non-touch pilot arc, air sensor and AG60P consumables for beginners and DIY work.

Pros

  • 55A output with 7/10-inch max cut at 55A on 220V
  • 1/2-inch max at 40A on 110V and 9/16-inch clean cut
  • 12.57 lb weight for moves between garage, workshop and job site
  • 1-year warranty and lifetime technical support

Cons

  • No safety listing is stated.
  • 40A circuit breaker is required.
  • No CNC function is stated.
  • Air compressor is purchased separately.

Other welders and gear to compare

Spec sheet comparison

Cutter Gear Score Max Amps Clean Cut Max Cut Voltage Warranty
SILATU 85A CNC Cutter 9.5/10 85A 1 inch 35mm 110V/220V 1-year
Bestarc 50A Cutter 9.5/10 50A 1/2 inch 2/3 inch 110V/220V 2 Year Manufacturer
VEVOR 65A Cutter 9.5/10 65A 9/16 inch 3/4 inch 110V/220V Not stated
Reboot 60A Cutter 9.5/10 60A 1/2 inch 5/8 inch 120V/240V Not stated
SILATU 55A Cutter 9.5/10 55A 9/16 inch 7/10 inch 110V/220V 1-year

Ratings in this table are the makers’ own claims taken from each product page (3 November 2026).

How to choose the best inverter plasma cutter

Amps and cut thickness

Output runs from 50A on the Bestarc to 85A on the SILATU CNC cutter, with the VEVOR at 65A, the Reboot at 60A and the SILATU 55A at 55A. Clean cuts run to 1/2 inch on the Bestarc and Reboot, 9/16 inch on the VEVOR and SILATU 55A, and 1 inch on the SILATU CNC cutter. Max cuts reach 2/3 inch on the Bestarc, 5/8 inch on the Reboot, 7/10 inch on the SILATU 55A, 3/4 inch on the VEVOR and 35mm on the SILATU CNC cutter. Match amps to the thickest plate you cut, and check whether the figure is a clean cut or a max cut.

Voltage and air supply

Every pick here runs dual voltage, with the Bestarc, both SILATU cutters and the VEVOR on 110V and 220V, and the Reboot on 120V and 240V. Dry compressed air is required, and the Bestarc, SILATU CNC and SILATU 55A listings note the compressor is purchased separately. The Bestarc recommends 65 PSI at 50A on 220V, while the SILATU CNC cutter recommends 70 PSI at 85A on 220V. See our air compressor for plasma cutter guide for shop air picks.

Pilot arc and controls

The Bestarc, both SILATU cutters and the VEVOR use a pilot arc that starts without touching the plate, which helps on rusted, painted or dirty metal. The SILATU CNC cutter adds non-HF blowback starting for CNC tables, while the Bestarc and SILATU cutters add adjustable PA time and 2T and 4T modes. The Reboot lists no pilot arc, so check the listing if non-touch starting matters to you. Keep consumables in mind too: the SILATU 55A uses widely available AG60P consumables. See our plasma cutter consumables for beginners guide for electrodes and nozzles.

Before You Strike an Arc

  • Confirm the breaker size the listing names before wiring the SILATU cutters for 220V.
  • Plan on a separate compressor for the Bestarc and both SILATU cutters; each listing states it is purchased separately.
  • Fasten the handheld torch firmly if you run the SILATU CNC cutter on a CNC table.
  • Stock AG60P electrodes and nozzles for the SILATU 55A, since the listing names that consumable line.

For more options, see our plasma cutters guides.

FAQ for welders

Do you need an air compressor for a plasma cutter?

Yes, dry compressed air is required, per the Bestarc listing, and the Bestarc and both SILATU listings state the compressor is purchased separately.

Can a plasma cutter cut cast iron?

None of the listings here names cast iron among the metals cut.

What is the highest output here?

The SILATU CNC cutter lists 85A, the highest output here, with the VEVOR at 65A and the Reboot at 60A.

Which plasma cutter has the longest warranty?

The Bestarc states a 2 Year Manufacturer warranty, longer than the 1-year warranty on both SILATU cutters, while the Reboot and VEVOR state no warranty term.

Scoring, line by line

The Gear Score weighs performance, build, value, safety and warranty. For a plasma cutter, safety means stated overheat and overload protection. The Reboot and VEVOR listings state overheat and overload protection, and none states a UL or ETL listing. Bestarc states 2 Year Manufacturer, and both SILATU cutters state a 1-year warranty. How we pick explains the weights.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
SILATU 85A CNC Cutter 9.5 32 21 20 0 2
Bestarc 50A Cutter 9.5 29 21 20 0 3
VEVOR 65A Cutter 9.5 30 21 20 5 0
Reboot 60A Cutter 9.5 30 21 20 5 0
SILATU 55A Cutter 9.5 28 20 20 0 2

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure.

More buying guides