Best Plasma Cutter Consumables for Beginners (2026)
Five plasma cutter consumable kits for beginners compared by torch fit, tip and electrode counts and materials, across PT-31, AG-60 and P80 torch families.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallYESWELDER PT31 Consumables 60pc9.5/10View on Amazon - 2
Best With CaseSILATU AG60P Consumables 50pc9.5/10View on Amazon - 3
Best for AG-60 TorchesARCCAPTAIN AG-60 Consumables9.4/10View on Amazon - 4
Best Extended TipsReboot PT31 Extended Kit 40pc9.4/10View on Amazon
A beginner’s first plasma cuts usually start clean and slowly go ragged, and the instinct is to blame the machine or the settings. More often the tip has eroded and the electrode is spent: consumables are the wear parts of plasma cutting, and the cut quality leaves with them. Keeping the right spares on the shelf is what separates a cutter that always works from one that waits on a delivery.
This roundup compares the best plasma cutter consumables for beginners across five kits: two for the PT-31 torch family, two for the AG-60 family and one for the P80, scored on torch fit, piece counts and what each listing actually states. The first job is matching your torch; everything after that is arithmetic.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall YESWELDER PT31 Consumables 60pc: 60 pieces for PT-31 torches: 30 tips, 15 electrodes, 10 rings, 5 cups. Check price on Amazon
- Best With Case SILATU AG60P Consumables 50pc: 50 AG-60 pieces with .040 in nozzles in a foam-padded carrying case. Check price on Amazon
- Best for AG-60 Torches ARCCAPTAIN AG-60 Consumables: 50 pieces with 20 nozzles and 20 electrodes plus wire spacer guides. Check price on Amazon
- Best Extended Tips Reboot PT31 Extended Kit 40pc: 40 extended tips, electrodes, cups and rings in copper for PT-31. Check price on Amazon
The machines

YESWELDER 60-Piece PT31 Plasma Consumables Kit
A 60-piece PT-31 consumables kit with 30 standard tips, 15 electrodes, 10 rings and 5 cups for CUT-40 and CUT-50 class machines.
Pros
- Most tips here: 30 standard tips against 15 electrodes
- Fits the common PT-31, JG-40 and WSD-LG40 torches
- Full set in one box: tips, electrodes, rings and cups
- Stated for 40 and 50 amp cutting machines
Cons
- Standard tips only: no extended pattern for guided drag cutting
- Part number reads PT31-40PCS against the 60-piece title
- Materials are described only as metal and ceramics
- No warranty term is stated

SILATU 50Pcs AG60P Plasma Cutter Consumables
A 50-piece AG-60 consumables kit with 20 nozzles and 20 electrodes in .040 in, 5 shield cups and 5 wire guides, in a foam-padded carrying case.
Pros
- Balanced wear counts: 20 nozzles and 20 electrodes
- Foam-padded carrying case keeps the kit organized
- Copper and ceramic construction stated for a stable arc
- Fits AG-60 family torches and SILATU STC machines plus CUT-55 and CUT-50
Cons
- AG-60 family only: no use to PT-31 or P80 owners
- Nozzles in one size only, .040 in
- Case adds weight: 1.68 lb for the kit
- No warranty term is stated

ARCCAPTAIN AG-60 Plasma Cutter Torch Consumables
A 50-piece AG-60 consumables kit with 20 nozzles at .040 in, 20 electrodes, 5 shield cups and 5 wire spacer guides, for ARCCAPTAIN CUT55 and CUT60 machines.
Pros
- Balanced wear counts: 20 nozzles and 20 electrodes
- Wire spacer guides included for standoff control
- Named fit for six ARCCAPTAIN cutter models plus the AG-60 torch family
- Metal and ceramics stated for durability
Cons
- No carrying case, where the SILATU kit includes one
- AG-60 family only
- Nozzles in one size only, .040 in
- No warranty term is stated

Plasma Cutter Consumables fits CUT40 CUT50
A 40-piece PT-31 consumables kit in copper with 10 extended tips, 10 extended electrodes, 10 shield cups and 10 gas rings.
Pros
- Extended tips and electrodes, the only long pattern here
- Even split: 10 each of tips, electrodes, cups and gas rings
- Copper construction stated
- Same PT-31, JG-40 and WSD-LG40 fit as the YESWELDER kit
Cons
- Fewer tips than the YESWELDER kit: 10 against 30
- Extended tips suit guided cutting; freehand beginners may prefer standard
- No warranty term is stated

P80 Plasma Cutter Nozzle Electrodes Consumables
A 45-piece consumables kit for P80 torches with a 1.3 tip size, rated for 60 amp cutting, with coated nozzles and shields.
Pros
- The only P80 torch kit in this group
- 1.3 tip size and 60 amp rating stated in the title
- Coatings on nozzles and shields stated to resist slag adhesion
- Heat resistance and thermal conductivity claims for high-temperature work
Cons
- No per-part breakdown: the 45 pieces are never itemized
- Bullets are durability claims without a single count or size beyond the 1.3 tip
- P80 fit only, the narrowest platform here
- No warranty term is stated
Other welders and gear to compare
Lotos PCS22 Plasma Cutter Consumables Sets for Brown ColorCheck price on Amazon
Lotos Plasma Cutter Consumables Sets for Brown Color LTP5000DCheck price on Amazon
Lotos PCS Plasma Cutter Consumables Sets for Brown ColorCheck price on Amazon
ARCCAPTAIN 60PCS PT31 Plasma Cutting Consumables Fit CUT-45Check price on Amazon
ARCCAPTAIN 110PCS PT31 Plasma Cutting Consumables Fit CUT-45Check price on Amazon
Spec sheet comparison
| Model | Gear Score | Torch fit | Pieces | Nozzles / tips | Electrodes | Extras | Warranty |
|---|---|---|---|---|---|---|---|
| YESWELDER PT31 Consumables 60pc | 9.5/10 | PT-31, JG-40, WSD-LG40 | 60 | 30 tips (standard) | 15 | 10 rings, 5 cups | Not stated |
| SILATU AG60P Consumables 50pc | 9.5/10 | AG-60, AG-60P, SG-55, WSD-60 | 50 | 20 at .040 in | 20 | 5 cups, 5 wire guides, case | Not stated |
| ARCCAPTAIN AG-60 Consumables | 9.4/10 | AG-60, AG-60P, SG-55, WSD-60 | 50 | 20 at .040 in | 20 | 5 cups, 5 wire spacer guides | Not stated |
| Reboot PT31 Extended Kit 40pc | 9.4/10 | PT-31, JG-40, WSD-LG40 | 40 | 10 extended tips | 10 extended | 10 cups, 10 gas rings | Not stated |
| KERUE P80 Consumables 45pc | 9.3/10 | P80 | 45 | 1.3 tip, breakdown not stated | Not stated | Coated nozzles and shields | Not stated |
All specs here repeat what the maker rates and the listing prints, copied down 21 October 2026. None of the five listings states a warranty term.
Buying guide: choosing the best plasma cutter consumables for beginners
Match the torch before anything else
Consumables are torch-specific, and these five kits fall into three families that do not swap. The YESWELDER and Reboot kits fit the PT-31, JG-40 and WSD-LG40 torches found on CUT-40 and CUT-50 class machines. The SILATU and ARCCAPTAIN kits fit the AG-60, AG-60P, SG-55 and WSD-60 torches. The KERUE kit fits the P80 torch alone. Read the torch model off your cutter’s handle or manual and buy inside that family; a bargain kit for the wrong torch is shelf decoration.
Standard or extended tips
Four kits here use standard-length tips. The Reboot kit is the exception: its 10 tips and 10 electrodes are extended, the long pattern that holds the torch’s shield cup off the work and suits drag cutting along a straightedge or template. For a beginner learning freehand cuts, standard tips in the YESWELDER pattern are the default; extended tips earn their place when guided cutting starts.
Count what wears, not the box total
Tips and electrodes are the fast-wearing pair, so their counts decide how long a kit lasts. The YESWELDER leads on tips with 30 standard tips and 15 electrodes. The two AG-60 kits match each other at 20 nozzles and 20 electrodes, a balanced burn rate. The Reboot spreads its 40 pieces evenly, 10 each of tips, electrodes, shield cups and gas rings. The KERUE states 45 pieces and a 1.3 tip size but no per-part breakdown, so its staying power cannot be counted from the listing.
Cups, rings, guides and the case
The supporting parts differ by family. PT-31 kits carry shield cups and gas or swirl rings (10 rings in the YESWELDER, 10 shield cups and 10 gas rings in the Reboot). The AG-60 kits carry shield cups and wire guides or spacer guides, 5 of each, which set the standoff from the work. Only the SILATU ships its 50 pieces in a carrying case with foam padding; the rest arrive as bagged or boxed parts, which is a small but real difference in a drawer of sharp copper.
FAQ for welders
How do I know which consumables my plasma cutter takes?
By the torch, not the machine badge. The listings name their torches: PT-31, JG-40 and WSD-LG40 for the two PT-31 kits; AG-60, AG-60P, SG-55 and WSD-60 for the SILATU and ARCCAPTAIN kits; P80 for the KERUE. Match the torch model printed on your torch or in its manual to the kit’s stated fit.
Are PT-31 and AG-60 consumables interchangeable?
The listings treat them as separate families with separate fit lists, and neither family names the other’s torches. Buy inside your torch’s family; the overlap in machine names (several CUT-50 class machines appear across listings) does not make the torch parts swap.
What does .040 in mean on these nozzles?
It is the nozzle orifice size, stated as .040 in and 1.0 in the AG-60 listings (the SILATU lists its nozzles as .040 in and 1.0 together). Both AG-60 kits use that size across their 20 nozzles; the PT-31 and P80 listings do not state an orifice figure in the same way, the KERUE naming its tip as 1.3 instead.
When should a beginner change a tip or electrode?
When the cut degrades: the ARCCAPTAIN listing states that timely replacement of accessories maintains the machine’s performance and cutting quality, and the SILATU ties its copper and ceramic build to a stable arc. The listings state no hour count or cut count, so the trigger is the cut itself getting ragged, wide or hard to start.
Do any of these kits state a warranty?
No. None of the five listings states a warranty term. The YESWELDER promises customer support contact and the KERUE describes quality checks, but neither states a term, so warranty scores zero across this roundup.
Related: our best arc plasma cutter consumables, the best air compressor for a plasma cutter.
Scoring, line by line
Each kit is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. Consumable kits carry no safety listing to state and none of these listings states a warranty, so those criteria score zero throughout; the ranking comes from torch fit, stated piece counts and materials.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| YESWELDER PT31 Consumables 60pc | 9.5 | 30 | 20 | 22 | 0 | 0 |
| SILATU AG60P Consumables 50pc | 9.5 | 29 | 20 | 21 | 0 | 0 |
| ARCCAPTAIN AG-60 Consumables | 9.4 | 29 | 20 | 20 | 0 | 0 |
| Reboot PT31 Extended Kit 40pc | 9.4 | 27 | 19 | 20 | 0 | 0 |
| KERUE P80 Consumables 45pc | 9.3 | 24 | 18 | 18 | 0 | 0 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number.





