Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Consumables for Plasma Cutter (2026): 5 Kits Compared

Compare plasma cutter consumables kits by torch fit, piece mix and stated warranty, from a 45-piece YESWELDER set to a 68-piece TIANLYLIN kit.

Best Consumables for Plasma Cutter (2026): 5 Kits Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1YESWELDER IPT40 45-Piece SetBest OverallYESWELDER IPT40 45-Piece Set9.7/10View on Amazon
  2. 2ARCCAPTAIN AG-60 50-Piece KitBest 50-Piece KitARCCAPTAIN AG-60 50-Piece Kit9.6/10View on Amazon
  3. 3TIANLYLIN IPT-60 68-Piece KitBest Piece CountTIANLYLIN IPT-60 68-Piece Kit9.6/10View on Amazon
  4. 4JIEYIFAN AG60P 50-Piece KitBest AG60P FitJIEYIFAN AG60P 50-Piece Kit9.6/10View on Amazon
  5. 5ARCCAPTAIN IPT60 23-Piece KitBest Copper BuildARCCAPTAIN IPT60 23-Piece Kit9.6/10View on Amazon

The torch starts cutting clean, then the arc wanders and the edge goes rough. Worn tips and electrodes are the usual cause, and the best consumables for plasma cutter work are the ones that match the torch and the cutter. This list compares 5 kits by torch fit, piece mix and stated warranty, using only what each listing publishes.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall YESWELDER IPT40 45-Piece Set: The only stated warranty here, 1 year, on a 45-piece IPT40 set. Check price on Amazon
  • Best 50-Piece Kit ARCCAPTAIN AG-60 50-Piece Kit: 50 pieces for AG-60, AG-60P, SG-55 and WSD-60 torches. Check price on Amazon
  • Best Piece Count TIANLYLIN IPT-60 68-Piece Kit: 68 pieces with 30 electrodes and 30 tips. Check price on Amazon
  • Best AG60P Fit JIEYIFAN AG60P 50-Piece Kit: 50 pieces for AG-60, AG-60P, SG-55 and WSD-60. Check price on Amazon
  • Best Copper Build ARCCAPTAIN IPT60 23-Piece Kit: Copper components, .045 inch aperture, IPT60 fit. Check price on Amazon

YESWELDER 45PCS Plasma Cutting Torch Consumables

YESWELDER 45PCS Plasma Cutting Torch Consumables

YESWELDER9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 45-piece consumables set for the IPT40 torch, with 20 electrodes, 20 .035 inch nozzles, 2 stand offs, 1 shield cup and 2 swirl rings.

Pros

  • 1 year warranty stated in the listing
  • 20 electrodes and 20 nozzles in a set
  • Fits YESWELDER CUT-55DS, CUT-55NHF, CUT-60DS and CUT-65DS cutters on the IPT40 torch
  • Diffusers and stand offs included, not just tips and electrodes

Cons

  • No safety standard stated
  • Nozzles in .035 inch only, no other size stated
  • 1 shield cup only in a 45-piece set
  • Durable claim with no material named
ARCCAPTAIN AG-60 Plasma Cutter Torch Consumables

ARCCAPTAIN AG-60 Plasma Cutter Torch Consumables

ARCCAPTAIN9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 50-piece consumables kit for AG-60, AG-60P, SG-55 and WSD-60 torches, with 20 nozzles, 20 electrodes, 5 shield cups and 5 wire spacer guides.

Pros

  • 50 pieces with a full mix of cups, nozzles, guides and electrodes
  • Metal and ceramic construction stated
  • Fits AG-60, AG-60P, SG-55 and WSD-60 torches
  • Shield cups and wire spacer guides included

Cons

  • No warranty term stated
  • No safety standard stated
  • No current range stated
  • No guide size stated
TIANLYLIN 68 Pcs IPT-60 Plasma Cutter Torch

TIANLYLIN 68 Pcs IPT-60 Plasma Cutter Torch

TIANLYLIN9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 68-piece consumables kit for PT-60 and PT-40 series torches, with 30 electrodes, 30 tips, 2 shield caps, 2 swirl rings and 4 stand-offs.

Pros

  • 68 pieces, the largest kit in this list
  • 30 electrodes and 30 tips for long replacement runs
  • Fits PT-60 and PT-40 series torches
  • Shield caps, swirl rings and stand-offs included

Cons

  • Replacement parts, not original, stated in the listing
  • No warranty term stated
  • No safety standard stated
  • No current range stated
JIEYIFAN AG60P Plasma Cutter Consumables Kit

JIEYIFAN AG60P Plasma Cutter Consumables Kit

JIEYIFAN9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 50-piece consumables kit for AG-60, AG-60P, SG-55 and WSD-60 torches, with 20 electrodes, 20 nozzles, 5 wire guides and 5 shield cups.

Pros

  • 50 pieces with electrodes, nozzles, guides and cups
  • Fits AG-60, AG-60P, SG-55 and WSD-60 torches
  • Material stated as high quality for a longer lifespan
  • 50 pieces, same count as the AG-60 kit

Cons

  • No warranty term stated
  • No safety standard stated
  • No nozzle size stated
  • No current range stated
ARCCAPTAIN 23Pcs IPT60 Plasma Cutter Torch

ARCCAPTAIN 23Pcs IPT60 Plasma Cutter Torch

ARCCAPTAIN9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 23-piece consumables kit for the IPT60 torch, with 10 nozzles, 10 electrodes, 1 stand off, 1 retaining cup and 1 swirl ring.

Pros

  • Copper components for conductivity and heat resistance
  • Nozzles and electrodes in equal count, 10 each
  • Ready to use after installation, no debugging stated
  • Fits IPT60 torch on ARCCAPTAIN CUT55 and CUT60 cutters

Cons

  • No warranty term stated
  • No safety standard stated
  • 23 pieces, the smallest kit in this list

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Pieces Torch Nozzle size Warranty
YESWELDER IPT40 45-Piece Set 9.7/10 45 IPT40 .035 inch 1 year
ARCCAPTAIN AG-60 50-Piece Kit 9.6/10 50 AG-60 .045 inch Not stated
TIANLYLIN IPT-60 68-Piece Kit 9.6/10 68 IPT-60 .039 inch Not stated
JIEYIFAN AG60P 50-Piece Kit 9.6/10 50 AG60P Not stated Not stated
ARCCAPTAIN IPT60 23-Piece Kit 9.6/10 23 IPT60 .045 inch Not stated

All specs here repeat what the maker rates and the listing prints, copied down 3 November 2026.

The machines

Buying guide: the best consumables for plasma cutter work

Torch fit first. A kit that fits the wrong torch is useless, so match the torch code before anything else. The YESWELDER set fits the IPT40 torch, the TIANLYLIN kit fits PT-60 and PT-40 series torches, and the ARCCAPTAIN and JIEYIFAN kits fit AG-60, AG-60P, SG-55 and WSD-60 torches. Check the torch code on the cutter before ordering.

Piece mix decides how long a kit lasts. Electrodes and nozzles wear down before the rest, so a kit heavy in electrodes and nozzles covers more cutting. The TIANLYLIN kit holds 30 electrodes and 30 tips, the YESWELDER set holds 20 electrodes and 20 nozzles, and the ARCCAPTAIN IPT60 kit holds 10 nozzles and 10 electrodes. Shield cups, swirl rings and stand offs round out the kits, and every kit here includes some of those.

Nozzle size and current range decide cut quality. The ARCCAPTAIN AG-60 and IPT60 kits state .045 inch nozzles, the YESWELDER set states .035 inch nozzles, and the TIANLYLIN kit states .039 inch tips. The IPT60 listing disagrees with itself on current, title 20-30A against bullets 50-60A, so check the cutter manual before buying.

Warranty and origin are worth a look. Only the YESWELDER set states a warranty term, 1 year, and the TIANLYLIN listing states its parts are replacement parts, not original parts. For a starter setup, see the best plasma cutter consumables for beginners list and the ground clamp for plasma cutter list.

Before You Strike an Arc

  • Match the torch code on the kit to the torch on the cutter.
  • Check the nozzle size against the torch before installing.
  • Keep spare electrodes and nozzles on hand, since those wear down before the rest.
  • Check the listing for a stated warranty term before buying.

For more options, see our plasma cutters guides.

FAQ for welders

How do I know which consumables fit my plasma cutter?

Match the torch code: the YESWELDER set fits the IPT40 torch, the TIANLYLIN kit fits PT-60 and PT-40 series torches, and the ARCCAPTAIN and JIEYIFAN kits fit AG-60, AG-60P, SG-55 and WSD-60 torches. Check the torch code on the cutter before ordering.

What comes in a plasma cutter consumables kit?

Every kit here mixes electrodes and nozzles with shield cups, swirl rings, stand offs or wire guides. The TIANLYLIN kit holds 68 pieces, the ARCCAPTAIN AG-60 and JIEYIFAN kits hold 50 pieces each, the YESWELDER set holds 45 pieces, and the ARCCAPTAIN IPT60 kit holds 23 pieces.

Do any of these kits state a warranty?

Only the YESWELDER set states a warranty term, 1 year. The other kits state no warranty term.

Why do the ARCCAPTAIN listings disagree on size and current?

The AG-60 kit title and bullets give .045 inch nozzles while its spec table model line gives .040 inch. The IPT60 kit title says 20-30A while its bullets say 50-60A, so check the cutter manual before buying.

Related: best plasma cutter consumables for beginners, ground clamp for plasma cutter, plasma cutter vs mig welder, and plasma cutter vs cold saw.

Scoring, line by line

Each kit is scored on performance, build, value, safety listing and warranty. No kit here states a safety listing, so every kit here scores zero on that criterion. Only the YESWELDER kit states a warranty term. How we pick explains the weights.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
YESWELDER IPT40 45-Piece Set 9.7 30 20 21 n/a 3
ARCCAPTAIN AG-60 50-Piece Kit 9.6 30 21 21 n/a 0
TIANLYLIN IPT-60 68-Piece Kit 9.6 29 20 22 n/a 0
JIEYIFAN AG60P 50-Piece Kit 9.6 29 20 21 n/a 0
ARCCAPTAIN IPT60 23-Piece Kit 9.6 28 21 19 n/a 0

A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.

More buying guides

Plasma Cutters ·

How Long Do Plasma Cutter Consumables Last?

Learn how arc time, pierce cycles, operating amperage, and air quality determine torch part lifespan, plus the warning signs that show when to replace…