Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Plasma Cutter Consumables Under 30 (2026): 5 Torch Kits Compared

Five plasma torch consumable kits for PT-31 and AG-60 torches, compared on piece counts, torch and machine fit, materials and how well each listing holds together.

Best Plasma Cutter Consumables Under 30 (2026): 5 Torch Kits Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1YESWELDER PT31 110-Piece KitTop PickYESWELDER PT31 110-Piece Kit9.5/10View on Amazon
  2. 2ARCCAPTAIN PT31 60PCS KitBest 60-Piece PT-31ARCCAPTAIN PT31 60PCS Kit9.5/10View on Amazon
  3. 3KERUE AG-60 Nozzles 50PCSBest AG-60 Nozzle StockKERUE AG-60 Nozzles 50PCS9.4/10View on Amazon
  4. 4YESWELDER AG-60 24PCS KitBest Small AG-60 KitYESWELDER AG-60 24PCS Kit9.4/10View on Amazon

When the cut starts to wander and the dross piles up, the torch is usually fine and the consumables are spent. Finding the best plasma cutter consumables under 30 means matching the torch family first, PT-31 or AG-60, then comparing what each kit actually puts in the box: tips, electrodes, cups, swirl rings and brackets. We compared five kits from KERUE, YESWELDER and ARCCAPTAIN on piece counts, stated torch and machine fit, materials and how well each listing holds together.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Top Pick YESWELDER PT31 110-Piece Kit: 110 pieces for PT-31, JG-40, WSD-LG40 torches: 50 tips, 30 electrodes, 20 rings, 10 cups. Check price on Amazon
  • Best 60-Piece PT-31 ARCCAPTAIN PT31 60PCS Kit: 60 pieces in metal and ceramics for PT-31, JG-40 and LG-40 torches, and not for the AG60. Check price on Amazon
  • Best AG-60 Nozzle Stock KERUE AG-60 Nozzles 50PCS: Fifty .045” nozzles with a stated slag-resistant coating for AG-60 family torches. Check price on Amazon
  • Best Small AG-60 Kit YESWELDER AG-60 24PCS Kit: 24 pieces in 0.040 inch for AG-60 torches, with a stated CUT-55DS fit and PRO warning. Check price on Amazon

The machines

YESWELDER 110-Piece PT31 Plasma Consumables Kit

YESWELDER 110-Piece PT31 Plasma Consumables Kit

YESWELDER9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 110-piece PT-31 kit with 50 tips, 30 electrodes, 20 swirl rings and 10 cups, fitted to PT-31, JG-40 and WSD-LG40 torches on 40 and 50 amp machines.

Pros

  • 110 pieces with the full set: 50 tips, 30 electrodes, 20 rings and 10 cups
  • States fit for L-TEC PT-31, JG-40 and WSD-LG40 torches with a long machine list
  • Rated for 40 and 50 amp cutting machines
  • Metal and ceramic construction stated in the listing

Cons

  • No tip size given for the standard tips
  • No warranty term in the listing
  • No CSA, UL or ETL listing stated
ARCCAPTAIN 60PCS PT31 Plasma Cutting Consumables

ARCCAPTAIN 60PCS PT31 Plasma Cutting Consumables

ARCCAPTAIN9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 60-piece PT-31 kit with 30 nozzles, 15 electrodes, 10 swirl baffles and 5 shield cups, built from metal and ceramics for PT-31, JG-40 and LG-40 torches.

Pros

  • Full 60-piece breakdown: 5 cups, 30 nozzles, 10 swirl baffles, 15 electrodes
  • Metal and ceramic construction stated
  • Broad machine list, including MIG205MP plasma cutter combos
  • States plainly that the parts do not fit the AG60 torch

Cons

  • No tip size stated
  • No warranty term in the listing
  • No CSA, UL or ETL listing stated
  • Smaller electrode count than the YESWELDER 110-piece for similar work
SG-55 AG-60 WSD-60 Plasma Cutter Cutting Torch Tip

SG-55 AG-60 WSD-60 Plasma Cutter Cutting Torch Tip

KERUE9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 50-piece AG-60 nozzle kit in .045'', with a stated slag-resistant coating, for SG-55, AG-60 and WSD-60 torches on 60 amp class cutters.

Pros

  • 50 nozzles in .045'', the most nozzle heavy box here
  • States a slag-resistant coating on the nozzles
  • Wide machine list: CUT60, CUT60SP, CUT50DP, CUT50PI, LGK-60, LTP 5000, CUT-55DS
  • Makes a stated claim of extended electrode life

Cons

  • Nozzles only; no electrodes, cups or rings in the box
  • No warranty term in the listing
  • No CSA, UL or ETL listing stated
YESWELDER AG-60 Plasma Cutter Consumables Kit

YESWELDER AG-60 Plasma Cutter Consumables Kit

YESWELDER9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 24-piece AG-60 kit with 0.040 inch tips: 10 nozzles, 10 electrodes, 2 ceramic cups and 2 brackets, with a stated fit for the CUT-55DS and a warning against the PRO models.

Pros

  • Clear 24-piece breakdown: 10 nozzles, 10 electrodes, 2 outer cups, 2 brackets
  • States the 0.040 inch tip size plainly
  • Names the CUT-55DS as a fit and warns it does not fit the CUT-55DS PRO or CUT-65DS PRO
  • Metal and advanced ceramics stated in the listing

Cons

  • The smallest piece count in our sample
  • No warranty term in the listing
  • No CSA, UL or ETL listing stated
  • No amperage rating for the machine class
60pcs PT-31 Extended Air Plasma Cutting Nozzle

60pcs PT-31 Extended Air Plasma Cutting Nozzle

KERUE9.3/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 60-piece PT-31 extended kit of tips, electrodes, cups and gas rings for PT-31, JG-40 and WSD-40 torches, whose bullets garble the piece breakdown.

Pros

  • Covers all four wear parts: tips, electrodes, cups and gas rings
  • States reference numbers for the nozzle, cup and gas ring
  • Fits PT-31, JG-40 and WSD-40 torches on CUT-40, CUT-50D and CT-312 machines
  • Extended tips stated for the PT-31 torch

Cons

  • Bullets garble the individual piece counts against the 60-piece title
  • No warranty term in the listing
  • No CSA, UL or ETL listing stated

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Torch fit Piece count What’s in the box Tip size Machine fit Warranty
YESWELDER PT31 110-Piece Kit 9.5/10 PT-31, JG-40, WSD-LG40 110 pieces 50 tips, 30 electrodes, 20 rings, 10 cups Not stated CUT-40, CUT-40D, LGK-40, CT312, CT312D, CT416, CT416D, CT518, CT518D, Super160, Super160P Not stated
ARCCAPTAIN PT31 60PCS Kit 9.5/10 PT-31, JG-40, LG-40 (not AG60) 60 pieces 5 shield cups, 30 nozzles, 10 swirl baffles, 15 electrodes Not stated CUT50, CUT-45, MIG205MP with plasma, CUT-40D, LGK-40, CT312, CT312D, CT416, CT416D, CT518, CT518D, CT520D, Super160, Super160P Not stated
KERUE AG-60 Nozzles 50PCS 9.4/10 SG-55, AG-60, WSD-60 50 pieces 50 nozzles .045” CUT60, CUT60SP, CUT50DP, CUT50PI, LGK-60, LTP 5000, CUT-55DS Not stated
YESWELDER AG-60 24PCS Kit 9.4/10 AG-60, AG-60P, SG-55, WSD-60 24 pieces 10 nozzles, 10 electrodes, 2 outer cups, 2 brackets 0.040 in CUT60, CUT60SP, CUT50DP, CUT50PI, LGK-60, LTP 5000, CUT-55DS, CUT-55HF, CUT-55DS PLUS Not stated
KERUE PT-31 Extended 60PCS 9.3/10 PT-31, JG-40, WSD-40 60 pieces (title) Tips, electrodes, cups, gas rings Not stated CUT-40, CUT-50D, CT-312 Not stated

Treat the specs as maker ratings pulled straight from the listings; we gathered them on 19 October 2026. Where a listing states a figure two ways, the table shows both.

Buying guide: what matters in the best plasma cutter consumables under 30

PT-31 parts and AG-60 parts are different families

The single most important fact on this page is that these kits split into two torch families that do not interchange. The three PT-31 kits fit PT-31, JG-40, LG-40, WSD-40 and WSD-LG40 torches, while the two AG-60 kits fit SG-55, AG-60, AG-60P and WSD-60 torches. ARCCAPTAIN states it directly: its PT-31 kit is not suitable for the AG60 torch. Read the marking on your torch before you order anything else.

Machine fit comes second. The YESWELDER 110-piece kit lists the longest machine run in our sample, from CUT-40 and LGK-40 through the CT518 pair and the Super160 pair. The ARCCAPTAIN 60-piece kit adds CUT50, CUT-45 and MIG205MP machines with a plasma cutter. The two AG-60 kits share the 60 amp class list: CUT60, CUT60SP, CUT50DP, CUT50PI, LGK-60, LTP 5000, plus the YESWELDER 24-piece kit adds YESWELDER’s own CUT-55DS, CUT-55HF and CUT-55DS PLUS.

Piece counts and what’s actually in the box

Counts run from 24 to 110 pieces, but what matters is the breakdown, not the headline. The YESWELDER 110-piece PT-31 kit is the only full restock here: 50 tips, 30 electrodes, 20 rings and 10 cups, a sane ratio since tips wear out first. The ARCCAPTAIN 60-piece kit balances its box too, with 5 shield cups, 30 nozzles, 10 swirl baffles and 15 electrodes. The YESWELDER AG-60 24-piece kit is the small complete set: 10 nozzles, 10 electrodes, 2 outer ceramic cups and 2 brackets.

The KERUE AG-60 kit is different in kind: 50 nozzles and nothing else, a refill for the part that dies first. The KERUE PT-31 extended kit shows why the breakdown matters more than the count: its title says 60 pieces, but the bullets garble the individual counts, so the composition cannot be checked until the box arrives. One listing even contradicts itself: the YESWELDER 110-piece spec table says Number Of Pieces: 1 while the title, bullets and Included Components all say 110. We scored listings with clear, consistent breakdowns higher.

Tip size: 0.040 versus .045”

Only the two AG-60 kits state a tip size. KERUE’s 50-piece kit uses .045” nozzles, and the YESWELDER 24-piece kit uses 0.040 inch tips. The three PT-31 kits do not state a tip size anywhere in their listings. Tip size follows the torch and the machine class, so match what your torch is rated for and do not mix sizes in the same torch.

Materials and stated claims

Three listings state their materials: the YESWELDER 110-piece and ARCCAPTAIN kits say metal and ceramics, and the YESWELDER AG-60 kit says high-quality metal and advanced ceramics. KERUE’s AG-60 kit makes the most specific claims of the group, a slag-resistant coating on the nozzles and extended electrode life, plus clean, smooth cuts with minimal slag. Report those as the maker’s claims, not facts, since consumable wear depends on air quality, amperage and stand-off, none of which the listings quantify.

Warranty and safety listings

None of the five listings states a warranty term, and none states a CSA, UL or ETL listing. That is normal for small consumable kits, but it means the warranty and safety scores are zero across the board and the ranking runs on performance, build and value alone. If a stated warranty matters to you, it will not be found in this price range of parts, so weigh the kit’s contents and fit instead.

Before You Strike an Arc

  • Match the torch family first. PT-31, JG-40, LG-40 and WSD-40 parts do not cross to AG-60, AG-60P, SG-55 or WSD-60 torches, and the ARCCAPTAIN listing states its kit is not suitable for the AG60 torch.
  • Check the exact machine model on the listing’s fit list. The YESWELDER AG-60 kit states it fits the CUT-55DS and does not fit the CUT-55DS PRO or the CUT-65DS PRO.
  • Count the box on arrival against the title. The KERUE PT-31 extended kit’s bullets garble the piece counts, so confirm all 60 pieces are there before the parts are needed.
  • Disconnect power before changing consumables, wear a shade 5 to 9 lens or helmet as the manual specifies, gloves and flame resistant clothing, and keep sparks off anything that can burn.
  • Feed the torch clean, dry air. Moisture and oil shorten the life of tips and electrodes, and a filter or dryer at the compressor keeps the cuts clean.

FAQ for welders

How do I match consumables to my torch?

Read the marking on the torch body or the machine’s manual, then buy from the matching family. PT-31, JG-40, LG-40, WSD-40 and WSD-LG40 parts group together, and AG-60, AG-60P, SG-55 and WSD-60 parts group together. The two families do not interchange, and ARCCAPTAIN states its PT-31 kit is not for the AG60 torch.

What do the 0.040 and .045” tip sizes mean?

Those are the orifice sizes stated on the two AG-60 kits: 0.040 inch on the YESWELDER 24-piece kit and .045” on the KERUE 50-piece kit. The three PT-31 kits do not state a tip size. Use the size your torch is rated for and do not mix sizes in one torch.

How many pieces should I buy?

It depends on how often the torch runs. A shop that cuts weekly will work through the YESWELDER 110-piece box without waste, since tips, electrodes, rings and cups are all included. For occasional repair work, the 24-piece AG-60 kit or the 50-nozzle refill covers the parts that wear first. Compare the breakdowns above, not just the headline counts.

Do any of these kits state a warranty?

No. None of the five listings states a warranty term, and none states a CSA, UL or ETL listing. Score them on contents, fit and listing consistency instead.

Can PT-31 parts fit an AG-60 torch?

No. The families are physically different, which is why the listings keep them separate. ARCCAPTAIN states its PT-31 kit is not suitable for the AG60 torch, and the AG-60 kits list only AG-60, AG-60P, SG-55 and WSD-60 torches. Buy the family your torch wears.

Related: our plasma cutting consumables guide for torch parts and wear, how long plasma cutter consumables last, and best arc plasma cutter consumables for AG-60 and PT-31 torch kits. Also see our guides on gas for plasma cutters, best air compressor for plasma cutters and best welding helmet for plasma cutting.

Scoring, line by line

Each kit is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing, which is why every safety and warranty score here is zero: none of the five listings states a safety certification or a warranty term.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
YESWELDER PT31 110-Piece Kit 9.5 30 21 22 0 0
ARCCAPTAIN PT31 60PCS Kit 9.5 29 20 21 0 0
KERUE AG-60 Nozzles 50PCS 9.4 28 20 20 0 0
YESWELDER AG-60 24PCS Kit 9.4 27 20 19 0 0
KERUE PT-31 Extended 60PCS 9.3 26 18 18 0 0

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score.

More buying guides

Plasma Cutters ·

How Long Do Plasma Cutter Consumables Last?

Learn how arc time, pierce cycles, operating amperage, and air quality determine torch part lifespan, plus the warning signs that show when to replace…