Best Abrasive Cut Off Wheels (2026): 5 Picks for Metal and Stainless
Five abrasive cut off wheels for metal and stainless steel, compared on diameter, thickness, arbor, max RPM and pack count.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallSAIT 23101 A60S9.6/10View on Amazon - 2
Highest Max RPMBenchmark Abrasives 4 Inch9.5/10View on Amazon - 3
Best 6 InchBenchmark Abrasives 6 Inch9.5/10View on Amazon - 4
Best Small Wheel KitWORKEASE 3 Inch 50 Pack9.5/10View on Amazon - 5
Largest DiameterMIDO 7 Inch 20 Pack9.4/10View on Amazon
A rusted bolt that will not turn, a steel tube that needs trimming to length, a bracket that has to come off the frame: each job ends the same way, with a thin wheel and a shower of sparks. The best abrasive cut off wheels cut fast, stay straight and leave a clean edge, so the grinder does the work instead of the arm. This guide compares wheels for metal and stainless steel, scored on diameter, thickness, arbor, max RPM and pack count, from what each listing states.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read the affiliate disclosure.
Quick picks
- Best Overall SAIT 23101 A60S: A 50-pack of 4.5 inch wheels, 0.045 inch thick on a 7/8 inch arbor, with fiberglass reinforcement and a 13,300 max RPM. Check price on Amazon
- Highest Max RPM Benchmark Abrasives 4 Inch: A 25-pack of 4 inch wheels rated to 24,465 RPM, the highest max RPM here, with a 3/8 inch arbor. Check price on Amazon
- Best 6 Inch Benchmark Abrasives 6 Inch: A 100-count pack of 6 inch wheels, 0.045 inch thick, rated to 11,000 RPM, with fit for many grinder brands. Check price on Amazon
- Best Small Wheel Kit WORKEASE 3 Inch 50 Pack: A 50-pack of 3 inch wheels with 3/8 and 1/4 inch mandrels, rated to 20,100 RPM for die grinders and rotary tools. Check price on Amazon
- Largest Diameter MIDO 7 Inch 20 Pack: A 20-pack of 7 inch wheels, 1/16 inch thick, rated to 8500 RPM and 80 m/s for 7 inch angle grinders. Check price on Amazon
The machines

United Abrasives-SAIT 23101 A60S General Purpose
A 50-pack of 4.5 inch Type 1 wheels in aluminum oxide, 0.045 inch thick on a 7/8 inch arbor, with fiberglass reinforcement and a 13,300 max RPM.
Pros
- Internal fiberglass reinforcement in a thin 0.045 inch wheel
- 50-pack of 4.5 inch wheels for ferrous and non-ferrous metals
- 13,300 max RPM for right-angle grinders and circular saws
- Hard bond stated for long life
Cons
- No warranty term is stated
- 4.5 inch diameter limits cut depth
- 7/8 inch arbor does not fit 3/8 inch rotary tool mandrels
- No mandrel comes in the box

Benchmark Abrasives 4 Inch Grinder Cut Off Wheels
A 25-pack of 4 inch Type 1 wheels in aluminum oxide, with a 3/8 inch arbor and a stated max of 24,465 RPM, the highest here.
Pros
- Highest max RPM here at 24,465
- 4 inch size fits small angle grinders and die grinders
- Fits Dewalt, Milwaukee, Makita, Bosch and many more brands
- Flat Type 1 shape for clean, burr-free cutting
Cons
- No warranty term is stated
- 3/8 inch arbor does not fit 7/8 inch angle grinders
- 4 inch diameter limits cut depth
- A 25-pack runs out sooner than the 50-packs here

Benchmark Abrasives 6" Aluminum Oxide Type 1 Cut
A 100-count pack of 6 inch Type 1 wheels in aluminum oxide, 0.045 inch thick on a 7/8 inch arbor, rated to 11,000 RPM.
Pros
- 6 inch diameter for longer cuts through pipe and flat sheet
- 0.045 inch thin kerf for minimal material loss
- Rated to 11,000 RPM for fast, smooth cuts
- Fits Dewalt, Milwaukee, Makita, Bosch and many more brands
Cons
- 7/8 inch arbor does not fit 3/8 inch rotary tools
- 6 inch size does not fit 4 inch angle grinders
- 11,000 max RPM is below the highest wheels here
- A 100-count pack suits a busy shop more than occasional use

50 Pack 3 Inch Metal Cut Off Wheel Discs with 1/4"
A 50-pack of 3 inch wheels with 3/8 and 1/4 inch mandrels, 3/64 inch thick on a 3/8 inch arbor, rated to 20,100 RPM.
Pros
- Two mandrels included, 3/8 and 1/4 inch, for die grinders and rotary tools
- Rated to 20,100 RPM, the second highest here
- Cuts carbon steel, stainless steel, iron, aluminum, sheet metal, bolts and plastic
- 3/64 inch thin design for precise, burr-free cuts
Cons
- 3 inch diameter limits cut depth
- 3/8 inch arbor does not fit 7/8 inch angle grinders
- No warranty term is stated
- Two mandrels add parts to keep track of

MIDO PROFESSIONAL ABRASIVE 20 Pack Cut Off Wheels
A 20-pack of 7 inch wheels in aluminum oxide, 1/16 inch thick on a 7/8 inch arbor, rated to 8500 RPM and 80 m/s.
Pros
- 7 inch diameter, the largest wheel here, for long cuts
- 1/16 inch ultra-thin design for fast, burr-free cutting
- Rated to 8500 RPM and 80 m/s for 7 inch angle grinders
- Cuts carbon steel, stainless steel, pipe, iron, copper and ferrous metals
Cons
- 7 inch size needs a 7 inch grinder, not a 4.5 inch one
- 8500 max RPM is the lowest here
- 20-pack is the smallest pack here
- 1/16 inch thickness removes more material than the 0.045 inch wheels
Spec sheet comparison
| Model | Gear Score | Diameter | Thickness | Arbor | Max RPM | Pack | Abrasive |
|---|---|---|---|---|---|---|---|
| SAIT 23101 A60S | 9.6/10 | 4.5 in | 0.045 in | 7/8 in | 13,300 | 50 | Aluminum oxide |
| Benchmark Abrasives 4 Inch | 9.5/10 | 4 in | Not stated | 3/8 in | 24,465 | 25 | Aluminum oxide |
| Benchmark Abrasives 6 Inch | 9.5/10 | 6 in | 0.045 in | 7/8 in | 11,000 | 100 | Aluminum oxide |
| WORKEASE 3 Inch 50 Pack | 9.5/10 | 3 in | 3/64 in | 3/8 in | 20,100 | 50 | Corundum |
| MIDO 7 Inch 20 Pack | 9.4/10 | 7 in | 1/16 in | 7/8 in | 8500 | 20 | Aluminum oxide |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 21 November 2026.
Best abrasive cut off wheels: buying guide
Wheel diameter and grinder size
Diameter decides which grinder a wheel fits. The wheels here run from 3 inches to 7 inches: the WORKEASE 3 inch, the Benchmark 4 inch, the SAIT 4.5 inch, the Benchmark 6 inch and the MIDO 7 inch. Match the wheel to the grinder size, and match the arbor too: the larger wheels use a 7/8 inch arbor, while the 3 and 4 inch wheels use a 3/8 inch arbor. The WORKEASE kit adds 3/8 and 1/4 inch mandrels for die grinders and rotary tools.
Thickness and kerf
Thickness sets the kerf, the slot the wheel leaves behind. The SAIT and the 6 inch Benchmark run 0.045 inch thick, the thinnest wheels here, for minimal material loss. The MIDO runs 1/16 inch thick, and the WORKEASE runs 3/64 inch thick. A thinner wheel leaves a narrower slot and wastes less metal, so keep the cut straight and let the wheel do the work.
Max RPM
Every wheel states a max RPM, and the grinder must never spin it faster. The Benchmark 4 inch wheel states 24,465 RPM, the highest here, and the WORKEASE states 20,100 RPM. The SAIT states 13,300 RPM, the Benchmark 6 inch states 11,000 RPM, and the MIDO states 8500 RPM with a speed of 80 m/s. Check the grinder speed against the wheel max RPM before mounting it.
Grain and material
Four wheels here use aluminum oxide grain, and the WORKEASE uses single-crystal and calcined corundum. Aluminum oxide cuts metal and stainless steel, and the listings state cutting for carbon steel, iron, copper, aluminum, cast iron and rebar, with the WORKEASE adding sheet metal, bolts and plastic. The SAIT adds internal fiberglass reinforcement, which the maker states gives safety in a thin wheel.
Pack count and mandrels
Pack counts here run from 20 to 100 wheels. The MIDO comes as a 20-pack, the Benchmark 4 inch as a 25-pack, and the SAIT and WORKEASE as 50-packs, while the Benchmark 6 inch listing names a 100-count pack. A bigger pack suits a shop that cuts every day; a smaller pack suits a grinder that sees occasional use. Only the WORKEASE kit includes mandrels, in 3/8 and 1/4 inch, for die grinders and rotary tools.
Use as directed. Clamp the work, keep the guard in place, wear eye and face protection, and never exceed the stated max RPM. Keep gloves away from rotating parts, and keep the area clear of anything that can burn, since sparks and hot metal fall from the cut. OSHA machine guarding rules cover the guards on abrasive wheels.
Before You Strike an Arc
- Check the wheel max RPM against the grinder, and never mount a wheel rated below the grinder speed.
- Check the arbor: 7/8 inch for the larger wheels, 3/8 inch for the 3 and 4 inch wheels, and use the mandrels that come with the WORKEASE kit for rotary tools.
- Wear eye protection and safety gear, as the MIDO and WORKEASE listings call for, and keep the guard in place.
- Clamp the work, keep gloves away from rotating parts, and check the wheel on arrival for cracks or chips before mounting it.
FAQ for welders
What size cut off wheel fits a 4.5 inch angle grinder?
A 4.5 inch wheel fits a 4.5 inch grinder, and the SAIT wheel here is 4.5 inches on a 7/8 inch arbor. A 4 inch wheel fits a 4 inch grinder, like the Benchmark 4 inch wheel with a 3/8 inch arbor. Match the diameter and the arbor to the grinder before ordering.
What does a 0.045 inch wheel cut better than a 1/16 inch wheel?
A 0.045 inch wheel leaves a thinner kerf, so it removes less metal per cut. The SAIT and the 6 inch Benchmark run 0.045 inch thick, while the MIDO runs 1/16 inch thick. Abrasive wheel cutting with a thin wheel suits sheet and tube, where a narrow slot matters more than wheel life.
How fast can these wheels spin?
Each wheel states its own max RPM: 24,465 for the Benchmark 4 inch wheel, 20,100 for the WORKEASE, 13,300 for the SAIT, 11,000 for the Benchmark 6 inch wheel and 8500 for the MIDO, which also states 80 m/s. Never run a wheel above its stated max RPM, and check the grinder speed before mounting a new wheel.
Can I use these wheels on stainless steel?
Yes, each wheel here states stainless steel among its cutting uses. The SAIT states ferrous and non-ferrous metals, the Benchmark wheels state metal and stainless steel, the MIDO states metals and stainless steel, and the WORKEASE states stainless steel with carbon steel, iron, aluminum, sheet metal, bolts and plastic.
What arbor size does my grinder need?
Most full-size angle grinders here take a 7/8 inch arbor, which the SAIT, the Benchmark 6 inch wheel and the MIDO all use. Smaller grinders and rotary tools take a 3/8 inch arbor, which the Benchmark 4 inch wheel and the WORKEASE use, and the WORKEASE kit adds 3/8 and 1/4 inch mandrels. Check the arbor on the grinder before ordering, since the wrong arbor will not mount.
Related: best cut off wheels for angle grinder, thin vs standard cut off wheel, angle grinder arbor sizes, angle grinder safety, best thin cut abrasive wheels, angle grinder types, and the metal saws hub. Also see best abrasive wheels and discs. Also see chop saw blade size. Also see metalworking machines.
Scoring, line by line
Each wheel carries a Gear Score on performance, build, value, safety and warranty, with the weights published on the How We Pick page. Cut off wheels carry no electrical safety listing, so a wheel scores on safety only where the listing states a standard or a safety feature, such as fiberglass reinforcement. No listing here states a warranty term, so every wheel scores zero on warranty, and the ranking comes from the other criteria.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| SAIT 23101 A60S | 9.6 | 30 | 22 | 21 | 5 | 0 |
| Benchmark Abrasives 4 Inch | 9.5 | 29 | 21 | 20 | 5 | 0 |
| Benchmark Abrasives 6 Inch | 9.5 | 28 | 20 | 21 | 5 | 0 |
| WORKEASE 3 Inch 50 Pack | 9.5 | 29 | 20 | 21 | 0 | 0 |
| MIDO 7 Inch 20 Pack | 9.4 | 28 | 20 | 20 | 0 | 0 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score.




