Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best .023 Mig Wire (2026): 4 Picks Compared

Four .023 mig wires for shop welding compared by spool size, shielding gas and use.

Best .023 Mig Wire (2026): 4 Picks Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Blue Demon .023 11 LBBest OverallBlue Demon .023 11 LB9.6/10View on Amazon
  2. 2YESWELDER .023 10 LBBest for Sheet MetalYESWELDER .023 10 LB9.6/10View on Amazon
  3. 3TOOLIOM .023 10 LBBest All-RounderTOOLIOM .023 10 LB9.6/10View on Amazon
  4. 4PGN .023 2 LB 2-PackBest Small SpoolPGN .023 2 LB 2-Pack9.5/10View on Amazon

Thin sheet metal punishes a heavy hand, and a light wire keeps the puddle where it belongs. The best .023 mig wire for that work is an ER70S-6 mild steel wire on a spool that feeds smoothly and holds a stable arc. This roundup compares .023 wires by spool size, gas mix and shop use, with each pick scored on what its listing states.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Blue Demon .023 11 LB: 11-pound spool with a stated 30-day warranty term Check price on Amazon
  • Best for Sheet Metal YESWELDER .023 10 LB: Listed for sheet metal on high current without burn-through Check price on Amazon
  • Best All-Rounder TOOLIOM .023 10 LB: Smooth feeding and stable arc for shop, farm and structural work Check price on Amazon
  • Best Small Spool PGN .023 2 LB 2-Pack: 2-pack of 2-pound spools for small jobs Check price on Amazon

The machines

Blue Demon ER70S6 X .023 X 11 LB MIG Carbon Steel

Blue Demon ER70S6 X .023 X 11 LB MIG Carbon Steel

Blue Demon9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 11-pound spool of ER70S6 .023 wire for all-position work, listed for porosity-free welds with low spatter.

Pros

  • 11-pound spool, the largest spool here
  • All-position wire with low spatter stated
  • Listed for porosity-free, X-ray quality welds
  • 30-day warranty term stated, the only warranty here

Cons

  • No spool material is stated
  • Gas stated only as CO2 and/or CO2 mix, with no argon mix ratio
  • No deposition rate figure is stated
  • 30-day warranty term is short for a shop spool
YESWELDER ER70S-6 MIG Welding Wire

YESWELDER ER70S-6 MIG Welding Wire

YESWELDER9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10-pound spool of copper-coated ER70S-6 .023 wire for sheet metal and general shop work on poor fit-up or rusty, oily plate.

Pros

  • Copper-coated mild steel wire for single or multiple pass welding
  • Works with 100% CO2 or 80% Ar and 20% CO2 shielding gas
  • Listed for sheet metal on high current without burn-through
  • ABS spool stated as durable and tough

Cons

  • No warranty term is stated
  • No tensile strength figure is stated
  • No deposition rate figure is stated
  • 10-pound spool is heavier to load than a 2-pound spool
TOOLIOM ER70S-6 .023" Mild Steel MIG Welding Wire

TOOLIOM ER70S-6 .023" Mild Steel MIG Welding Wire

TOOLIOM9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10-pound spool of ER70S-6 .023 wire with smooth feeding and a stable arc for general shop, farm and structural work.

Pros

  • Smooth feeding with a stable arc stated
  • Works with 100% CO2 or 80% Ar and 20% CO2 shielding gas
  • Listed for construction, farm implements, tanks and truck bodies
  • ABS spool stated as tough for shipping and smooth feeding

Cons

  • No warranty term is stated
  • No tensile strength figure is stated
  • No wire feed speed range is stated
  • 10-pound spool is heavier to load than a 2-pound spool
(2 Pack) PGN Solid MIG Welding Wire

(2 Pack) PGN Solid MIG Welding Wire

PGN Bearings9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-pack of 2-pound spools of ER70S-6 .023 wire for single or multi-pass welds on T-joints, butt welds and lap welds.

Pros

  • 2-pack of 2-pound spools, the smallest spools here
  • High levels of silicon and manganese deoxidizers stated
  • Listed for T-joints, butt welds and lap welds
  • Single or multi-pass welding and all-position gas welding stated

Cons

  • No warranty term is stated
  • No shielding gas mix is stated
  • No tensile strength figure is stated
  • 2-pound spools run out faster than 10-pound or 11-pound spools

Other welders and gear to compare

Spec sheet comparison

Wire Gear Score Diameter Spool Shielding gas
Blue Demon .023 11 LB 9.6/10 .023 inch 11 lb CO2 and/or CO2 mix
YESWELDER .023 10 LB 9.6/10 .023 inch 10 lb 100% CO2 or 80% Ar / 20% CO2
TOOLIOM .023 10 LB 9.6/10 .023 inch 10 lb 100% CO2 or 80% Ar / 20% CO2
PGN .023 2 LB 2-Pack 9.5/10 .023 inch 2-pack of 2-pound spools Not stated

Treat the specs as maker ratings pulled straight from the listings; we gathered them on 3 November 2026.

Buying guide: what matters in the best .023 mig wire

Diameter and thin work

A .023 inch wire suits thin work because the puddle stays small and controllable. The YESWELDER listing names sheet metal on high current without burn-through, which is exactly the thin-stock job this diameter serves. All four picks here are .023 inch, so diameter does not separate them; spool size, gas and stated shop use do.

Shielding gas

Solid wire needs gas, and the listings here name two routes. The YESWELDER and TOOLIOM listings name 100% CO2 or a mix of 80% Ar and 20% CO2. The Blue Demon listing requires CO2 and/or CO2 mix, with no argon mix ratio stated. The PGN listing names gas welding but states no mix, so check the gas before buying that spool.

Spool size

Spool size decides how often the wire runs out mid-job. The Blue Demon spool holds 11 lb, the YESWELDER and TOOLIOM spools hold 10 lb each, and the PGN pick is a 2-pack of 2-pound spools. A bigger spool suits longer runs, while small spools suit short jobs and trial runs. Check that the spool fits the machine before buying.

Fit-up and dirty plate

Fit-up decides how forgiving a wire feels on real shop metal. The YESWELDER listing names poor fit-up and rusty, oily plate, and general shop work with the same wire. The Blue Demon listing names general shop work with poor fit-up, plus steel castings and forging salvage. The TOOLIOM listing names farm implements, tanks and structural work. The PGN listing names T-joints, butt welds and lap welds. Match the wire to the job on the bench.

Use as directed. Keep gas cylinders upright, weld in ventilated space, and keep spatter off hoses and cords. Check the gas mix on the listing before striking an arc. See the OSHA welding overview and the Safety Disclaimer.

Before You Strike an Arc

  • Check the shielding gas on the listing: 100% CO2 or 80% Ar and 20% CO2 for the YESWELDER and TOOLIOM wires, CO2 and/or CO2 mix for Blue Demon.
  • Check the spool size against the machine: 11-pound and 10-pound spools against 2-pound spools.
  • Check fit-up and plate condition: the YESWELDER listing names poor fit-up and rusty, oily plate.
  • Check the wire diameter on arrival: .023 inch on every pick here.

FAQ for welders

What gas works with .023 ER70S-6 wire?

The YESWELDER and TOOLIOM listings name 100% CO2 or a mix of 80% Ar and 20% CO2. The Blue Demon listing requires CO2 and/or CO2 mix. The PGN listing names gas welding but states no mix, so check the gas before buying that spool.

What is .023 wire best for?

The listings name sheet metal, auto body repairs, farm implements, tanks, truck bodies and structural work. The YESWELDER listing names sheet metal on high current without burn-through. The Blue Demon listing names general shop work with poor fit-up, plus steel castings and forging salvage.

Can .023 wire weld thick steel?

No listing here states a thickness range, so the listings do not answer that directly. They name sheet metal, auto body repairs, farm implements, tanks and truck bodies.

Does .023 MIG wire need shielding gas?

Yes for these picks. The YESWELDER and TOOLIOM listings name 100% CO2 or 80% Ar and 20% CO2, the Blue Demon listing requires CO2 and/or CO2 mix, and the PGN listing names gas welding.

How do I pick between a 2-pound spool and a 10-pound spool?

Pick by job size. The PGN pick is a 2-pack of 2-pound spools for small jobs, while the YESWELDER and TOOLIOM spools hold 10 lb each and the Blue Demon spool holds 11 lb. A bigger spool suits longer runs, while small spools suit short jobs.

Related: more .023 mig wire and other welding consumables. See also flux core vs MIG, how to choose a MIG welder and welding duty cycle explained.

Scoring, line by line

Each wire is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. No wire here states a safety listing, so every wire here scores zero on that criterion; the ranking comes from the other four. Only the Blue Demon listing states a warranty term, 30 days, so it is the only pick with warranty points.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Blue Demon .023 11 LB 9.6 29 20 21 n/a 1
YESWELDER .023 10 LB 9.6 30 21 21 n/a 0
TOOLIOM .023 10 LB 9.6 29 21 21 n/a 0
PGN .023 2 LB 2-Pack 9.5 28 20 18 n/a 0

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.

More buying guides

Welding Consumables ·

MIG Welding Wire Types and Which to Buy

ER5356, ER4043 and ER70S-6 cover aluminum and mild steel MIG work: aluminum wire for aluminum alloys, mild steel wire for steel, matched by diameter…