7 vs 10 Gas Lens: Which One Should You Buy?
The #7 and #10 gas lens cups compared on size, torch fit and what each RIVERWELD listing states, with the #7 side in a 10-piece kit and a 10-pack, and the #10 side in a 4-piece jumbo kit.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
RIVERWELD TIG Gas Lens Ceramic Cups 54N series 4#9.6/10View on Amazon - 2
RIVERWELD TIG Gas Lens Ceramic Cups 54N15 7# 7/16"9.6/10View on Amazon - 3
RIVERWELD TIG Gas Lens Ceramic Cups Jumbo 57N 53N9.6/10View on Amazon
Verdict. In the 7 vs 10 gas lens choice, the cup size changes two things: how wide a gas shield sits over the puddle, and how far the cup can get into a joint. Reach for the #7, 7/16 in, on tight joints and inside corners, where the smaller cup gets in close on WP 17, 18 and 26 torches. Reach for the #10, 5/8 in, on open joints with room around the torch, where a wider cup covers more of the puddle. The jumbo kit is the only #10 listing, but it names no collet body.
A TIG bead on a tight joint: the cup sets how wide the gas shield covers the puddle, and the choice of cup size depends on the joint in front of you. This comparison uses RIVERWELD cup listings as the examples, to show what each size brings and what each listing leaves unclear.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
The machines

RIVERWELD TIG Gas Lens Ceramic Cups 54N series 4#
A 10-piece 54N ceramic cup kit with #4, #5, #6, #7 and #8 cups for WP 17, 18 and 26 torches, for a 45V24-45V29 gas lens collet body and 10N collet.
Pros
- 10 cups in 5 sizes, #4, #5, #6, #7 and #8, in 1 kit
- Fits WP 17, 18 and 26 torches
- Works with a 45V24-45V29 gas lens collet body and 10N collet
- Alumina ceramic shroud nozzles
Cons
- Largest cup is #8, 1/2 in; no #10 or #12 in the kit
- Only 1 cup each of #5 and #4
- Part number 53N87L in the product details does not match the 54N series
- No warranty term in the listing

RIVERWELD TIG Gas Lens Ceramic Cups 54N15 7# 7/16"
A 10-pack of #7, 7/16 in, 11.0 mm ceramic gas lens cups for WP 17, 18 and 26 torches, for a 45V24-45V29 gas lens collet body and 10N collet.
Pros
- 10 cups of the same size, #7, 7/16 in
- Fits WP 17, 18 and 26 torches
- Works with a 45V24-45V29 gas lens collet body and 10N collet
- Alumina ceramic shroud nozzle
Cons
- Only 1 cup size, #7, in the pack
- No #10 or larger cup in this listing
- No warranty term in the listing
- Stated weight is identical to the mixed 10-piece kit, 0.64 lb

RIVERWELD TIG Gas Lens Ceramic Cups Jumbo 57N 53N
A 4-piece jumbo ceramic cup kit with #6, #8, #10 and #12 cups for WP 9, 17, 20, 18 and 26 torches.
Pros
- Only listing here with a #10 cup, 5/8 in, 16 mm
- 4 sizes in 1 kit: #6, #8, #10 and #12
- Fits WP 9, 17, 20, 18 and 26 torches
- Largest cup is #12, 3/4 in, 19.1 mm
Cons
- Only 1 cup of each size, 4 cups in all
- No #7 cup in the kit
- No collet body named in the listing
- No warranty term in the listing
Other welders and gear to compare
WeldingCity 5-pk Assorted Gas Lens Ceramic CupCheck price on Amazon
RIVERWELD TIG Gas Lens Collet Body 45V 13N 57N 53N CeramicCheck price on Amazon
RIVERWELD TIG Gas Lens Collet Bodies 45V64 10N24 3/32" 53N87Check price on Amazon
RIVERWELD TIG Stubby Gas Lens Collet Body 17GL 10N CeramicCheck price on Amazon
Welding Knight Large TIG Gas Lens Collet Body 995795Check price on Amazon
RIVERWELD TIG Gas Lens Collet Bodies 995795 1/8“ & 3.2mmCheck price on Amazon
Side by side
| RIVERWELD 54N Kit | RIVERWELD 54N15 #7 | RIVERWELD Jumbo Kit | |
|---|---|---|---|
| Gear Score | 9.6/10 | 9.6/10 | 9.6/10 |
| Side | 7 gas lens | 7 gas lens | 10 gas lens |
| Cup sizes | #4, #5, #6, #7, #8 | #7 | #6, #8, #10, #12 |
| Cups in pack | 10 | 10 | 4 |
| #7 cup orifice | 7/16 in, 11.0 mm | 7/16 in, 11.0 mm | Not in this kit |
| #10 cup orifice | Not in this kit | Not in this kit | 5/8 in, 16 mm |
| Cup length | 1-11/16 in, 42 mm | 1-11/16 in, 42 mm | 47.6 mm |
| Torches | WP 17, 18, 26 | WP 17, 18, 26 | WP 9, 17, 20, 18, 26 |
| Collet body | 45V24-45V29, 10N collet | 45V24-45V29, 10N collet | Not stated |
| Weight | 0.64 lb | 0.64 lb | 0.35 lb |
| Warranty | Not stated | Not stated | Not stated |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 11 November 2026. No listing here states a warranty term or a safety standard.
7 vs 10 gas lens: what the numbers mean
The #7 cup in these listings measures 7/16 in, 11.0 mm. The #10 cup measures 5/8 in, 16 mm. That is the size gap between the two sides here. All of the cups are ceramic gas lens cups for TIG torches. The #7 listings state alumina nozzles.
In plain terms, the cup opening decides how much of the joint the gas covers. A wider cup, like the #10 at 5/8 in, lays a wider gas shield over the puddle, which suits larger joints and open work where you have room around the torch. A smaller cup, like the #7 at 7/16 in, reaches into tighter joints and inside corners where a big cup will not fit. Reach for the #7 when access is the problem. Reach for the #10 when coverage is the problem and you have room to work. The listings give sizes only, not gas flow or amp settings, so set those from your torch manual.
Cup sizes in each listing
The #7 side comes as a 10-piece kit with #4, #5, #6, #7 and #8 cups, or as a 10-pack of #7 cups alone. The #10 side here is a 4-piece jumbo kit with #6, #8, #10 and #12 cups, 1 of each. The #7 listings hold the most cups, 10 each, and the jumbo kit holds the largest cups.
Torches and collet bodies
The #7 listings state their fit: WP 17, 18 and 26 torches, with a 45V24-45V29 regular gas lens collet body and a 10N collet. The jumbo kit lists WP 9, 17, 20, 18 and 26 torches but names no collet body, so check the collet body your torch uses before ordering.
Weight and build
Each #7 listing states the same weight, 0.64 lb, for 10 cups. The jumbo kit states 0.35 lb for 4 cups. The #7 cups are alumina ceramic shroud nozzles, 1-11/16 in long, 42 mm, while the jumbo cups are 47.6 mm long.
What is in the box
The kit holds 10 cups: 4 of the #8, 2 of the #7, 2 of the #6, and 1 each of the #5 and #4. The #7 pack holds 10 cups of #7. The jumbo kit holds 4 cups, 1 of each size. The listings name cups only, and no collet body or collet is listed as included.
Choose the 7 gas lens if
- You weld tight joints or inside corners, where a smaller cup gets the torch close enough to the puddle.
- You work around cramped fit-up, where a narrow cup gives you the reach a big cup lacks.
- You run a WP 17, 18 or 26 torch, the fit the #7 listings state.
- You move from joint to joint and need a cup that gets into different access angles.
Choose the 10 gas lens if
- You weld open, larger joints, and a wider shield over the puddle matters more than reach.
- You have clear access around the joint, so the bigger cup will not crowd the work.
- You run a WP 9 or WP 20 torch, which only the jumbo listing states, or a WP 17, 18 or 26.
- You want the #12, 3/4 in cup for the widest shield in these listings, and you can confirm your torch’s collet body, since the listing names none.
Before You Strike an Arc
- Look over each ceramic cup for chips or cracks when the box arrives, since a damaged rim disturbs the gas flow.
- Check the size marking on the cup against the joint you plan to weld before you strike an arc.
FAQ for welders
What size is a #7 gas lens cup?
The #7 cup in these listings measures 7/16 in, 11.0 mm, and is 1-11/16 in long. It fits the 54N series for WP 17, 18 and 26 torches.
What size is a #10 gas lens cup?
The #10 cup in the jumbo kit measures 5/8 in, 16 mm, and is 47.6 mm long. It is the 53N88 cup in a kit that also holds #6, #8 and #12 cups.
Do these cups fit a WP 17 torch?
Yes, all of the listings fit WP 17 torches. The #7 listings also fit WP 18 and 26, and the jumbo kit also fits WP 9, 20, 18 and 26.
Which collet body do the #7 cups need?
The #7 listings work with a 45V24-45V29 regular gas lens collet body and a 10N collet. The jumbo kit names no collet body, so check your torch setup before ordering.
How many cups come in each listing?
The 54N kit and the #7 pack each hold 10 cups. The jumbo kit holds 4 cups, 1 each of #6, #8, #10 and #12.
Related: tig cup size comparison, parts of tig torch, best tig welder, best filler rod for tig welding stainless, how do you tig weld aluminum, best tungsten electrode grinder and the TIG welders hub.
Scoring, line by line
Each cup is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. No listing here states a safety standard or a warranty term, so safety and warranty add nothing here.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| RIVERWELD 54N Kit | 9.6 | 30 | 21 | 21 | n/a | 0 |
| RIVERWELD 54N15 #7 | 9.6 | 28 | 21 | 21 | n/a | 0 |
| RIVERWELD Jumbo Kit | 9.6 | 30 | 20 | 19 | n/a | 0 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.




