Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Tig Gas Lens Kit for Stainless Steel (2026)

Five TIG gas lens kits for WP-series torches, from 12-piece collet sets to 87-piece consumable kits, compared by fit, cups and contents.

Best Tig Gas Lens Kit for Stainless Steel (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1RIVERWELD 39-Pc KitMost complete kitRIVERWELD 39-Pc Kit9.6/10View on Amazon
  2. 2RX WELD 87-Pc Kit87-piece kitRX WELD 87-Pc Kit9.6/10View on Amazon
  3. 3Zinger 63-Pc Stubby Kit63-piece stubby kitZinger 63-Pc Stubby Kit9.5/10View on Amazon
  4. 4Welding Knight 43-Pc Kit43-piece #10 kitWelding Knight 43-Pc Kit9.5/10View on Amazon
  5. 5RIVERWELD 12-Pc JumboJumbo collet bodiesRIVERWELD 12-Pc Jumbo9.4/10View on Amazon

The stainless header is tacked up, the tungsten is ground, and the torch needs consumables before the first bead. That is the job the best tig gas lens kit for stainless steel is bought for: a gas lens kit steadies the arc end of the torch with the cups, collet bodies and collets a TIG torch burns through. This guide compares five kits on what each listing states: piece count, torch fit, cup sizes and contents.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Most complete kit RIVERWELD 39-Pc Kit: Cups, collet bodies, back caps and O-rings with full size markings. Check price on Amazon
  • 87-piece kit RX WELD 87-Pc Kit: #10 and #12 cups with stubby gas lens parts for WP-17/18/26. Check price on Amazon
  • 63-piece stubby kit Zinger 63-Pc Stubby Kit: #10 glass cup stubby gas lens kit for WP-17/18/26 torches. Check price on Amazon
  • 43-piece #10 kit Welding Knight 43-Pc Kit: #10 glass cup kit for WP-9/20/25 with 43 consumable pieces. Check price on Amazon
  • Jumbo collet bodies RIVERWELD 12-Pc Jumbo: Jumbo 995795 gas lens bodies and 10N25 collets, cups sold separately. Check price on Amazon

The machines

RIVERWELD TIG Gas Lens Collet Bodies 13N 45V

RIVERWELD TIG Gas Lens Collet Bodies 13N 45V

RIVERWELD9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 39-piece TIG consumable kit for WP-9/20/25 torches with quartz glass cups, gas lens collet bodies, back caps and O-rings.

Pros

  • Most complete kit: 7 quartz glass cups, 8 gas lens collet bodies, 3 back caps and 20 O-rings
  • Full size markings: cups #4 to #12 with mm and inch sizes, collet bodies for .040 to 1/8 in tungsten
  • Stated materials: copper, Pyrex, brass and phenolic
  • Short, medium and long back caps included for different torch setups

Cons

  • No warranty term is stated
  • Fits WP-9/20/25 torches only, not the larger WP-17/18/26 series
  • 6.3 oz kit with many small parts to keep track of
  • No stubby configuration; standard-length consumables
RX WELD 87PCS TIG Welding Accessories Torch Kit

RX WELD 87PCS TIG Welding Accessories Torch Kit

RX WELD9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 87-piece stubby gas lens torch kit for WP-17/18/26 with #10 and #12 cups.

Pros

  • 87 pieces, the highest count here, with 12 TIG cups
  • #10 and #12 cups in the stubby gas lens configuration
  • Fits WP-17, WP-18 and WP-26 torches
  • 0.57 kg kit covering pipeline and general TIG consumables

Cons

  • No warranty term is stated
  • Listing warns the insulator rings can not match the CK torch
  • Cup sizes beyond #10 and #12 are not detailed
  • Materials not stated as specifically as the RIVERWELD kit
Zinger TIG Welding Torch Stubby Gas Lens #10 Glass

Zinger TIG Welding Torch Stubby Gas Lens #10 Glass

OKBA9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 63-piece stubby gas lens kit with #10 glass cups for WP-17/18/26 TIG torches.

Pros

  • 63 consumable pieces in the stubby gas lens configuration
  • #10 glass cups for the WP-17/18/26 torch series
  • 1.08 lb kit, easy to keep at the welding bench
  • Conductivity similar to 2% thoriated tungsten with no welding program changes

Cons

  • No warranty term is stated
  • Cup sizes beyond #10 are not detailed in the listing
  • Fits WP-17/18/26 only, not the smaller WP-9/20/25 series
  • Materials not stated beyond the glass cups
43Pcs TIG Welding Torch Stubby Gas Lens #10 Glass

43Pcs TIG Welding Torch Stubby Gas Lens #10 Glass

Welding Knight9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 43-piece stubby gas lens kit with #10 glass cups for WP-9/20/25 TIG torches.

Pros

  • 43 consumable pieces with #10 glass cups
  • Title and bullets state fit for WP-9, WP-20 and WP-25 torches
  • 9.1 oz kit with stated package dimensions
  • Listing states professional inspection before leaving the factory

Cons

  • No warranty term is stated
  • Listing warns the insulating rings may not match the CK torch
  • Cup sizes beyond #10 are not detailed
RIVERWELD TIG Gas Lens Collet Bodies 995795 10N25

RIVERWELD TIG Gas Lens Collet Bodies 995795 10N25

RIVERWELD9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 12-piece jumbo gas lens collet body and collet set for WP-17/18/26 TIG torches.

Pros

  • Jumbo 995795 gas lens collet bodies with 10N25 collets for 1/8 in and 3.2 mm tungsten
  • Copper construction stated
  • Fits WP-17, WP-18 and WP-26 torches
  • 5.6 oz, the lightest box here

Cons

  • No warranty term is stated
  • No cups included; cups sold separately
  • Only 12 pieces against 39 to 87 in the other kits
  • Single tungsten size: 1/8 in and 3.2 mm only

Other welders and gear to compare

Spec sheet comparison

RIVERWELD 39-Pc Kit RX WELD 87-Pc Kit Zinger 63-Pc Stubby Kit Welding Knight 43-Pc Kit RIVERWELD 12-Pc Jumbo
Pieces 39 87 63 43 12
Fits torch WP-9/20/25 WP-17/18/26 WP-17/18/26 WP-9/20/25 WP-17/18/26
Cups #4 to #12 glass, 7 pcs #10 and #12, 12 pcs #10 glass #10 glass None stated
Collet bodies 13N 45V series Stubby gas lens Stubby gas lens Stubby gas lens 995795 jumbo
Extras Back caps, O-rings Not stated Not stated Not stated 10N25 collets
Weight 6.3 oz 0.57 kg 1.08 lb 9.1 oz 5.6 oz
Warranty Not stated Not stated Not stated Not stated Not stated

Ratings in this table are the makers’ own claims taken from each product page (22 October 2026). “Not stated” means the listing does not give the figure.

Buying guide: the best tig gas lens kit for stainless steel

Match the kit to the torch

Fit is the whole decision. Three kits state WP-17, WP-18 and WP-26: the RX WELD 87-piece, the Zinger 63-piece and the RIVERWELD 12-piece jumbo. Two kits state WP-9, WP-20 and WP-25: the RIVERWELD 39-piece and, per its title and bullets, the Welding Knight 43-piece. The Welding Knight spec table reads WP-17/18/26 against that, and the title and bullets win. A WP-17 torch will not take WP-9 consumables, so check the torch handle before ordering.

Stubby kits and cup sizes

Four of the five are stubby kits, the shorter consumable stack for tight joints. The #10 glass cup is the common thread: the Zinger, the Welding Knight and the RX WELD all include #10 cups, and the RX WELD adds #12. The RIVERWELD 39-piece kit is the only one with a full spread, #4 through #12 in glass with inch and mm markings. The 12-piece jumbo includes no cups at all. If the work needs more than #10, the RIVERWELD 39-piece is the only box that has them.

Piece count and what is actually in the box

Counts run from 12 to 87, but count what the pieces are. The RIVERWELD 39-piece lists every item: 7 cups, 8 collet bodies, 3 back caps, a gasket and 20 O-rings. The RX WELD 87-piece and Zinger 63-piece state totals with less breakdown. The RIVERWELD 12-piece is bodies and collets only. A big count of unnamed pieces is worth less than a smaller count with every part named, which is why the 39-piece kit leads despite the middle count. Count the cups as well as the pieces: cups are the consumable that wears first.

The CK torch caveat

Two listings carry the same warning in different words: the RX WELD states its insulator rings can not match the CK torch, and the Welding Knight states its insulating rings may not match the CK torch. If the torch is a CK, confirm fit with the seller before buying either kit. The other three listings state no brand caveat.

Back caps and the small parts

Only the RIVERWELD 39-piece kit lists back caps: short, medium and long, so the torch length fits the joint. It also includes a gasket cup insert and 20 temperature-resistant O-rings, the small parts that seal the gas path. The other four kits state no back caps, which means reusing the ones already on the torch. When the back cap is too long for a tight corner, the stubby kits help, but only the RIVERWELD box gives all three lengths to choose from.

Use as directed. TIG welding needs eye protection rated for arc flash and ventilation that moves fumes away from the breathing zone. Let the torch cool before swapping consumables, and keep the work area clear of anything that can burn.

FAQ for welders

Will these kits fit my torch?

Check the WP series on the torch handle. The RX WELD, Zinger and RIVERWELD jumbo fit WP-17, WP-18 and WP-26; the RIVERWELD 39-piece fits WP-9, WP-20 and WP-25, as does the Welding Knight per its title and bullets. WP-9 and WP-17 consumables do not interchange.

What is a stubby gas lens kit?

A stubby kit uses shorter cups, collet bodies and back caps than the standard stack, which shortens the torch for tight joints. Four of the five kits here are stubby configurations; the RIVERWELD 39-piece uses standard-length consumables.

Do these kits include tungsten?

No. The kits supply cups, gas lens collet bodies, collets and back caps; the collet bodies are sized for tungsten such as 1/8 in and 3.2 mm, but tungsten electrodes are not listed as included in any of the five.

Why do two listings warn about CK torches?

The RX WELD and Welding Knight listings both warn their insulator or insulating rings may not match the CK torch. The other three listings state no brand caveat. If you weld with a CK torch, confirm fit before ordering those two kits.

How many pieces do I actually get?

The RX WELD states 87 pieces, the Zinger 63, the Welding Knight 43, the RIVERWELD 39-piece kit 39, and the RIVERWELD jumbo 12. Only the RIVERWELD 39-piece breaks down every item; treat the other totals as box counts, not shopping lists.

What tungsten sizes do the collet bodies take?

The RIVERWELD 39-piece collet bodies cover .040 to 1/8 in tungsten across the 13N 45V series. The jumbo set takes 1/8 in and 3.2 mm only. Match the collet body to the tungsten diameter on the bench, not from memory, because the wrong size will not grip.

Related: the best tungsten welding electrode, the TIG vs stick for stainless steel comparison and the best solar powered welding helmet picks.

Scoring, line by line

Each kit is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. No listing here states a safety certification or a usable warranty term, so every kit scores zero on safety and warranty; the ranking comes from piece count, documented detail, torch fit and materials.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
RIVERWELD 39-Pc Kit 9.6 30 21 20 n/a 0
RX WELD 87-Pc Kit 9.6 29 19 21 n/a 0
Zinger 63-Pc Stubby Kit 9.5 28 19 20 n/a 0
Welding Knight 43-Pc Kit 9.5 27 19 20 n/a 0
RIVERWELD 12-Pc Jumbo 9.4 24 20 18 n/a 0

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.

More buying guides

Welding Consumables ·

Best TIG Gas Lens Kit Under 40: 5 Picks

Best tig gas lens kit under 40: 5 kits compared by torch series, piece count and cup style, from 58-piece sets to jumbo ceramic.…