6013 vs 7014 Welding Rod: Which One Should You Buy?
E6013 is the all-position, easy-start rod for thin steel; this guide compares four E6013 listings and notes where 7014 fits.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
6013 welding rod 3/32 12LB Carbon Steel Sticks E6013 Welding9.6/10View on Amazon - 2
Forney 32005 E7014 Welding Rod9.5/10View on Amazon - 3
TOOLIOM E6013 Welding Rod Carbon Steel Stick ElectrodesView on Amazon - 4
E6013 Welding Rod 3/32" 1lb Carbon Steel Stick Electrodes forView on Amazon - 5
E6013 Welding Rod 3/32" 4.4LB Carbon Steel Stick ElectrodesView on Amazon - 6
Runtoo E6013 Welding Rod 3/32″View on Amazon - 7
ATLASWELDER 6013 Welding Rod 1/8" 10LBView on Amazon - 8
ATLASWELDER 6013 Welding Rod 1/8" 5LBView on Amazon
The bench has thin sheet and a stick welder, and the question is which rod to burn. 6013 vs 7014 welding rod is the choice this guide answers: E6013 is the all-position, easy-start rod for thin metal and general mild steel work, per these listings. All four products featured here are E6013 rods; no 7014 rod is listed among these examples, so this guide presents the 6013 side on its stated merits.
Other welders and gear to compare
TOOLIOM E6013 Welding Rod Carbon Steel Stick ElectrodesCheck price on Amazon
E6013 Welding Rod 3/32" 1lb Carbon Steel Stick Electrodes forCheck price on Amazon
E6013 Welding Rod 3/32" 4.4LB Carbon Steel Stick ElectrodesCheck price on Amazon
Runtoo E6013 Welding Rod 3/32″Check price on Amazon
ATLASWELDER 6013 Welding Rod 1/8" 10LBCheck price on Amazon
ATLASWELDER 6013 Welding Rod 1/8" 5LBCheck price on Amazon
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
6013 vs 7014 welding rod: the short answer
Pick E6013 for thin steel, sheet metal and all-position work with an easy arc start: every listing here states all-position use, and the TOOLIOM adds medium-to-shallow penetration with a soft, stable arc. The 7014 side is not represented in these listings, so compare any 7014 rod on the same stated specs: diameter, length, AC/DC, positions and amps.
Side by side
| Factor | TOOLIOM 5LB | SOUNDACTURE 4.4LB | SOUNDACTURE 1LB | Runtoo 1LB |
|---|---|---|---|---|
| Rod | E6013 | E6013 | E6013 | E6013 |
| Diameter | 3/32 in | 3/32 in (title) | 3/32 in | 3/32 in |
| Length | 14 in | 14 in | 14 in | 14 in |
| Pack | 5 lb | 4.4 lb | 1 lb | 1 lb |
| Amps stated | 40-80A | 60-90A | Not stated | Not stated |
| Power | AC/DC | AC/DC | Not stated | Not stated |
Figures are as stated on each listing and collected 20 October 2026. “Not stated” means the listing does not give the figure.
What E6013 brings, per the listings
All four are 3/32-inch, 14-inch E6013 rods for stick welding carbon and mild steel in all positions: flat, horizontal, vertical and overhead. The TOOLIOM states AC/DC operation with 40-80A recommended, a soft and stable arc, seldom any smoke or spatter, and easy arc re-starts, with vertical-down welds that are almost self-cleaning. The SOUNDACTURE 4.4LB states AC/DC as well, with 60-90A on portable welders, low spatter and slag that lifts off easily. The two 1lb listings keep it simple: the SOUNDACTURE 1lb states easy arc striking with a smooth, steady arc, while the Runtoo states a stable arc with minimal splatter and easy slag removal. Neither states amperage.
The four rods, ranked
1. TOOLIOM 5LB. The most complete listing: 3/32 inch by 14 inch, 5 lb, AC/DC, all positions, medium-to-shallow penetration, 40-80A, soft stable arc with seldom any smoke or spatter.
2. SOUNDACTURE 4.4LB. The bulk pick: 3/32 inch by 14 inch, 4.4 lb, AC/DC, all positions, 60-90A on portable welders, low spatter with easy slag removal. Note the spec table lists 1 lb and 5/64 inch against the title’s 3/32 inch 4.4 lb; the title and bullets win.
3. SOUNDACTURE 1LB. The small-job pick: 3/32 inch by 14 inch, 1 lb, easy arc strike, all-position, shallow penetration for thin materials. No amperage stated.
4. Runtoo 1LB. The basic pick: 3/32 inch by 14 inch, 1 lb, stable arc with minimal splatter and easy slag removal for all positions. No amperage stated.
Our best 6013 welding rod for beginners roundup covers more picks, and best stick welder for thin metal covers the machines these rods run on.
Where 7014 fits
No 7014 rod is featured among these listings, so this guide makes no claims about 7014’s arc or penetration. If you are shopping 7014 rods, compare the same stated specs the E6013 listings give: the rod diameter and length, whether the listing states AC/DC, the welding positions named, and any recommended amperage. Our rod oven vs rod storage tube guide covers keeping any rod dry.
Stick welding safety. Stick welding makes arc flash, fumes and spatter. Weld with ventilation or outdoors with your head out of the plume, wear the right helmet and gloves, and clear anything flammable from the area. See the OSHA welding overview and our Safety Disclaimer.
Buying advice: picking an E6013 rod from these listings
Match amperage to your machine
The TOOLIOM 5LB lists 40A to 80A for its 3/32 inch rods. The SOUNDACTURE 4.4LB lists 60 to 90 amps. If your welder is a small inverter, the TOOLIOM lower end gives more room; if you run hotter, the SOUNDACTURE 4.4LB covers the higher range. All four are 3/32 inch diameter and 14 inches long, so the choice is pack size and stated amps, not dimensions.
Pack size for the job
The TOOLIOM comes in 5LB, the SOUNDACTURE in 4.4LB and 1LB, and the Runtoo in 1LB. For occasional repairs, a 1LB pack from SOUNDACTURE or Runtoo keeps rods fresh. For longer fabrication, the 5LB TOOLIOM or 4.4LB SOUNDACTURE means fewer reorders. All list 14-inch rods.
AC or DC
The TOOLIOM and SOUNDACTURE 4.4LB state AC and DC operation. The SOUNDACTURE 1LB and Runtoo are listed for stick/arc use. If you weld AC-only, confirm with the seller before ordering. E6013 is a general-purpose rod for all positions, which all four listings state.
Penetration and finish
The TOOLIOM describes medium-to-shallow penetration for thin metal plates, sheet metal and cover passes needing a smooth surface. The SOUNDACTURE 4.4LB notes low spatter and easy slag removal. For thin sheet, the shallow penetration of E6013 is the point; for thicker joints, the listings do not state a 7014 alternative, so that is a gap to ask the seller about.
Storage
The Runtoo 1LB includes a storage box; the SOUNDACTURE 4.4LB includes a plastic case. The TOOLIOM 5LB and SOUNDACTURE 1LB do not list a case. Dry storage keeps the flux coating intact, so a listed case is a practical plus for hobby welders.
FAQ for welders
What is E6013 good for?
Per these listings, all-position welding of mild steel and carbon steel, thin sheet and light gauge metals, with a soft, stable arc and low spatter. The TOOLIOM adds poorly fitted joints and cover welding that needs a smooth surface.
What amps do these 3/32-inch rods run?
The TOOLIOM states 40-80A and the SOUNDACTURE 4.4LB states 60-90A on portable welders. The two 1lb listings state no amperage; check your machine’s door chart or manual.
Can E6013 run on AC and DC?
The TOOLIOM and the SOUNDACTURE 4.4LB state AC/DC operation. For the SOUNDACTURE 1lb and Runtoo, check the listing before ordering if you weld AC-only.
How much rod do I get?
5 lb in the TOOLIOM, 4.4 lb in the SOUNDACTURE 4.4LB, and 1 lb each in the SOUNDACTURE 1lb and the Runtoo. All four are 14-inch rods.
Where does 7014 fit?
No 7014 rod is featured among these listings, so this guide makes no 7014 claims. Compare any 7014 rod on the same stated specs: diameter, length, AC/DC, positions and amps.
Related: best 6013 welding rod for beginners, best stick welder for thin metal, rod oven vs rod storage tube, and the welding consumables hub.




