1084 vs 1095 Knife Steel: Which One Should You Buy?
The Dkoryi 1084 bars and the TITGGI 1095 bars are both annealed, cold-rolled knife steel in 12 inch bars. Here is how they compare on size, pack, finish, packaging and what is left unclear.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
1084 Carbon Steel Bar Cold Rolled for Knife9.6/10View on Amazon - 2
5Pcs 1084 Carbon Steel Bar Cold Rolled for Knife9.5/10View on Amazon - 3
TITGGI 5 Pack 1095 Steel Flat Bar for Knife9.5/10View on Amazon - 4
TITGGI 4 Pack 1095 Steel Flat Bar for Knife9.5/10View on Amazon
Verdict. Pick 1084 if you want a large stock of blanks with the finish stated in detail; pick 1095 if you want the maker’s pick for handmade knives with rust-proof packaging. The Dkoryi 1084 12-pack scores highest here, while the TITGGI 1095 4-pack is the cleanest 1095 example, with no size or count confusion in its figures.
The 1084 vs 1095 knife steel choice comes down to size, pack, finish and packaging, and both are sold here as annealed, cold-rolled bars in the same length. This comparison puts the Dkoryi 1084 bars against the TITGGI 1095 bars on size, pack, finish, packaging and what is left unclear.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
The two steels

1084 Carbon Steel Bar Cold Rolled for Knife
A 12-pack of cold-rolled, pre-annealed 1084 steel bars, 12 by 1.5 by 1/8 inch, precision-sheared to a 0.1mm tolerance with pre-deburred edges and a mill-scale-free surface.
Pros
- 12 bars of 1084 steel, 12 by 1.5 by 1/8 inch, cold rolled and pre-annealed
- Precision-sheared to a 0.1mm tolerance, with pre-deburred edges
- Mill-scale-free surface, ready for grinding and polishing
- Laser cut for reduced warpage, with superior flatness and consistent hardness
Cons
- No weight stated
- No warranty term is stated
- 12 bars is a large buy for one knife
- Bar stock still needs grinding and heat treatment before it becomes a knife

5Pcs 1084 Carbon Steel Bar Cold Rolled for Knife
A 5-pack of cold-rolled, pre-annealed 1084 steel bars, 12 by 1.5 by 1/8 inch, precision-sheared to a 0.1mm tolerance with pre-deburred edges and a mill-scale-free surface.
Pros
- 5 bars of 1084 steel, 12 by 1.5 by 1/8 inch, cold rolled and pre-annealed
- Precision-sheared to a 0.1mm tolerance, with pre-deburred edges
- Mill-scale-free surface, ready for grinding and polishing
- 0.75 lb for the set, light to carry to the shop
Cons
- No warranty term is stated
- No rust-proof packaging stated
- 5 bars is less steel than the 12-pack for repeat work
- Bar stock still needs grinding and heat treatment before it becomes a knife

TITGGI 5 Pack 1095 Steel Flat Bar for Knife
A 5-pack of annealed, cold-rolled 1095 steel flat bars, 12 by 2 by 0.12 inch, with a smooth finish for cutting and shaping and three layers of rust-proof packaging.
Pros
- 5-pack of 1095 steel, annealed and cold rolled for machinability
- Three layers of rust-proof packaging: rust-proof oil, rust-proof paper and bubble bags
- Smooth finish for cutting and shaping
- 12 by 2 by 0.12 inch bars, wider than the 1.5 inch bars
Cons
- No warranty is stated
- No tolerance figure stated
- No pre-deburred edges stated
- Bar stock still needs grinding and heat treatment before it becomes a knife

TITGGI 4 Pack 1095 Steel Flat Bar for Knife
A 4-pack of annealed, cold-rolled 1095 steel flat bars, 12 by 1.5 by 0.12 inch, with a smooth finish for cutting and shaping and three layers of rust-proof packaging.
Pros
- 4-pack of 1095 steel, annealed and cold rolled for machinability
- Three layers of rust-proof packaging: rust-proof oil, rust-proof paper and bubble bags
- Smooth finish for cutting and shaping
- 1095 steel selected by many knife manufacturers
Cons
- No warranty is stated
- Only one size offered, 12 by 1.5 by 0.12 inch
- No pre-deburred edges stated
- Bar stock still needs grinding and heat treatment before it becomes a knife
Other welders and gear to compare
4 Pack 1084 Steel for Knife Making-12 x1.5 x1/8" Steel FlatCheck price on Amazon
Patriot Steel 1095 High Carbon Knife Making & Forging SteelCheck price on Amazon
Patriot Steel 5160 High Carbon Knife Making & Forging SteelCheck price on Amazon
Amyhill 6 Pack 1084 Steel for Knife Making 1/8" x 1-1/2" xCheck price on Amazon
SALUINOKI 4pcs 1084 Steel Flat Stock for Knife MakingCheck price on Amazon
Side by side: 1084 vs 1095 knife steel
| Dkoryi 1084 12-Pack | Dkoryi 1084 5-Pack | TITGGI 1095 5-Pack | TITGGI 1095 4-Pack | |
|---|---|---|---|---|
| Gear Score | 59 | 55 | 54 | 53 |
| Steel | 1084 | 1084 | 1095 | 1095 |
| Size | 12 by 1.5 by 1/8 in | 12 by 1.5 by 1/8 in | 12 by 2 by 0.12 in | 12 by 1.5 by 0.12 in |
| Pack | 12 bars | 5 bars | 5 pack | 4 pack |
| Weight | Not stated | 0.75 lb | 3.99 lb | 2.44 lb |
| Annealed | Yes | Yes | Yes | Yes |
| Packaging | Protective packaging | Protective packaging | Three layers, rust-proof | Three layers, rust-proof |
Specifications are as published on each listing and collected 13 November 2026. Neither side states a hardness figure, a carbon content figure or a warranty term, so those cannot be compared here.
Size and pack
All four bars are 12 inches long. The Dkoryi bars are 1.5 inches wide and 1/8 inch thick, and the TITGGI 4-pack matches that size at 12 by 1.5 by 0.12 inch. The Dkoryi 5-pack needs a check on the size, and the TITGGI 5-pack needs a check on the pack count and the width.
Pack size is the clearest difference between the two Dkoryi sets: 12 bars against 5 bars, in the same steel and size.
Finish and flatness
The Dkoryi bars state the most about finish: precision-sheared to a 0.1mm tolerance, pre-deburred edges, a mill-scale-free surface and laser cutting for reduced warpage, with superior flatness and consistent hardness. The TITGGI bars state a smooth finish for cutting and shaping, and annealed steel for machinability.
Packaging
The TITGGI bars come in three layers of rust-proof packaging: rust-proof oil, rust-proof paper and bubble bags. The Dkoryi bars come in protective packaging, with no rust-proof layer stated.
Weight
The Dkoryi 5-pack weighs 0.75 lb for the set. The TITGGI 5-pack weighs 3.99 lb and the TITGGI 4-pack weighs 2.44 lb. The Dkoryi 12-pack states no weight, so the two sides cannot be compared on weight per bar.
Choose the Dkoryi 1084 bars if
- You want a large stock of blanks in one size.
- You want the finish stated in detail: tolerance, deburred edges and a mill-scale-free surface.
- You want pre-annealed, laser-cut bars with reduced warpage.
- You want a smaller set to try 1084 first, with the 5-pack.
Choose the TITGGI 1095 bars if
- You want 1095 steel for handmade knives.
- You want rust-proof packaging in three layers.
- You want annealed steel that machines easily and saves abrasive belts.
- You want a 4-pack or a 5-pack rather than a 12-pack.
FAQ for welders
Is 1084 or 1095 better for a first knife?
Between these two, 1084 comes with the finish stated in more detail: a 0.1mm tolerance, pre-deburred edges and a mill-scale-free surface. 1095 comes with rust-proof packaging and annealed steel for machinability. Neither side states a hardness figure, so pick on the finish and packaging stated, not on a hardness claim.
What size are these knife steel bars?
All four bars are 12 inches long. The Dkoryi bars are 1.5 inches wide and 1/8 inch thick, and the TITGGI 4-pack is 12 by 1.5 by 0.12 inch. The TITGGI 5-pack needs a check before ordering, since its figures disagree on the width.
Do these steel bars come annealed?
Yes. The Dkoryi bars are pre-annealed and laser cut, and the TITGGI bars are annealed and cold rolled. Annealed steel machines more easily and saves abrasive belts.
How many bars come in each pack?
The Dkoryi 12-pack holds 12 bars and the Dkoryi 5-pack holds 5 bars. The TITGGI 4-pack holds 4 bars. The TITGGI 5-pack needs a check before ordering, since its figures disagree on the pack count.
Is there a warranty on these steel bars?
No. No warranty is stated for any of the four bars, so buy on the steel, size and finish stated. If a warranty matters to you, ask the seller before ordering.
Related: best forge burner kit for knife making, best 2 burner forge, best anvil for blacksmithing, types of blacksmith hammers, and the blacksmithing hub.
Scoring, line by line
Both steels are scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Dkoryi 1084 Steel Bar 12-Pack | 9.6 | 28 | 21 | 22 | n/a | 0 |
| Dkoryi 1084 Steel Bar 5-Pack | 9.5 | 28 | 20 | 19 | n/a | 0 |
| TITGGI 1095 Steel Flat Bar 5-Pack | 9.5 | 27 | 21 | 18 | n/a | 0 |
| TITGGI 1095 Steel Flat Bar 4-Pack | 9.5 | 27 | 21 | 16 | n/a | 0 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.
Before you shape a blade. Wear safety glasses and gloves when grinding, and clamp the work before cutting. Grinding throws hot sparks, so work with ventilation, clear anything flammable from the area, and keep an extinguisher close. See our Safety Disclaimer.




