Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

035 vs 045 Mig Wire: Which One Should You Buy?

.035 suits sheet metal and auto body work and is the diameter all four listings here state, sold as 10 lb 2-packs and 33 lb spools.

035 vs 045 Mig Wire: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1ARCCAPTAIN Flux Core Welding Wire E71T-GS .035" 2LB x 1 MildARCCAPTAIN Flux Core Welding Wire E71T-GS .035" 2LB x 1 Mild9.5/10View on Amazon
  2. 2Blue Demon E71TGS X .045” X 10 LB MIG Flux Core Welding WireBlue Demon E71TGS X .045” X 10 LB MIG Flux Core Welding Wire9.6/10View on Amazon
  3. 3Blue Demon 308LFC-O X .045 X 10LB Spool Stainless Steel FluxBlue Demon 308LFC-O X .045 X 10LB Spool Stainless Steel Flux9.7/10View on Amazon
  4. 4PGN ER70S-6 .035"PGN ER70S-6 .035"View on Amazon
  5. 5Blue Demon ER70S6 X .035 X 33 LB MIG/GMAW Carbon SteelBlue Demon ER70S6 X .035 X 33 LB MIG/GMAW Carbon SteelView on Amazon
  6. 6TOOLIOM ER70S-6 .035" Mild Steel MIG Welding Wire 10LB 2PCSTOOLIOM ER70S-6 .035" Mild Steel MIG Welding Wire 10LB 2PCSView on Amazon
  7. 7TOOLIOM ER70S-6 0.035" Mild Steel MIG Welding Wire 10LB HighTOOLIOM ER70S-6 0.035" Mild Steel MIG Welding Wire 10LB HighView on Amazon
  8. 8WeldingCity 2-pk Mild Steel MIG Welding Wire ER70S-6 10-LbWeldingCity 2-pk Mild Steel MIG Welding Wire ER70S-6 10-LbView on Amazon
  9. 9PGN ER70S-6 .035" Solid MIG Welding WirePGN ER70S-6 .035" Solid MIG Welding WireView on Amazon

035 vs 045 mig wire: buy .035 for sheet metal, auto body and general shop work. All four wires on this page are .035 ER70S-6, sold as 10 lb 2-packs and 33 lb spools, and ER70S-6 is, per YESWELDER’s listing, the most common copper-coated mild steel GMAW wire for single or multiple pass welding. No listing on this page documents a .045 wire, so this guide compares what the four .035 listings state.

Other welders and gear to compare

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

035 vs 045 mig wire: the verdict

.035 is the small-shop default in these listings. YESWELDER states it suits sheet metal on high welding current without burn through, and YESWELDER and TOOLIOM both name auto body repairs among its uses. All four wires here are .035, so the choice comes down to spool size, gas, and the uses each listing states. Pick the diameter that matches the metal you weld most, and check your machine’s manual for the diameters it feeds.

Side by side

.035 .045 Takeaway
Wire diameter .035 in, stated on all four listings Not documented in these listings Match the diameter to the metal
Documented uses Sheet metal, auto body, general shop Not documented in these listings .035 is the documented choice here
Gas 100% CO2 or 80% Ar / 20% CO2 (stated on two listings) Not documented in these listings Gas choice is about the wire class
Spool sizes here 10 lb 2-packs and 33 lb spools Not documented in these listings Spool sizes are stated on the listings
Pick it when Sheet metal, auto body, general shop Not documented in these listings Check your machine’s manual for supported diameters

Every figure above comes from the four listings on this page, which document .035 only.

When .035 is the better choice

  • Sheet metal and auto body. YESWELDER states sheet metal on high current without burn through, and both YESWELDER and TOOLIOM state auto body repairs.
  • General shop work. PGN states T joints, butt welds and lap welds across professional, metalworking and DIY work; Blue Demon states general shop applications and home projects.
  • Single and multi pass. PGN states single-pass and multi-pass welding; YESWELDER states single or multiple pass welding.
  • Rusty or oily steel. YESWELDER states ER70S-6 suits poor fit-up and rusty, oily plates, with high manganese and silicon deoxidizers for a smoother bead.

When a bigger spool is the better choice

  • Long runs. YESWELDER and Blue Demon sell 33 lb spools.
  • Smaller machines or shared shops. PGN sells a 10 lb 2-pack, and TOOLIOM sells two 10 lb spools.
  • Check the drive. Check that your machine’s drive fits the spool you buy.

The .035 wires on this page, ranked

All four are .035 ER70S-6 solid wires, ranked highest to lowest:

  1. YESWELDER 33 lb. It states 100% CO2 or 80% Ar / 20% CO2, sheet metal at high current without burn through, auto body and structural uses, and a stated tough ABS spool.
  2. Blue Demon 33 lb. All position, with stated porosity-free, x-ray quality welds and the highest as-welded tensile strength of the plain carbon steel wires (maker claims); no additional warranty is stated.
  3. PGN 2-pack 10 lb. Low spatter, T, butt and lap joints, and packaging stated to help prevent tangles.
  4. TOOLIOM 2-pack 10 lb. Smooth feeding and stable arcs with the same gas options; the listing also states it can weld stainless steel, an unusual claim for a carbon steel wire.

Spool, packaging and what the listings claim

Start with the spool. YESWELDER sells a 33 lb spool on a stated tough ABS plastic spool that is anti-fragile in shipping; TOOLIOM sells two 10 lb spools, also on stated tough ABS. PGN sells a 10 lb 2-pack with packaging stated to help prevent tangles and support easier handling during setup. Blue Demon sells a 33 lb spool with no spool material stated. The 33 lb spools suit long fabrication runs; the 2-packs split 20 lb across two spools for smaller machines or shared shops.

On the wire itself, YESWELDER calls ER70S-6 the most common copper-coated mild steel GMAW wire, and states the highest combination of manganese and silicon deoxidizers, permitting higher currents with 100% CO2 and leaving a smoother bead with little to zero post-weld cleanup. TOOLIOM states high manganese and silicon for strong welds, minimal spatter and smooth feeding; PGN states high silicon and manganese deoxidizers for smoother welds and professional-looking beads. YESWELDER gives the diameter as .035 in (0.9 mm).

One listing stands out on claims. Blue Demon states all-position welding and porosity-free x-ray quality welds, all as maker claims, and no additional warranty is stated for it. TOOLIOM states its carbon steel wire can weld stainless steel, an unusual claim the listing does not explain.

MIG fumes and gas. MIG welding makes fumes, so ventilate the shop and keep your head out of the plume. These are solid wires: the listings that mention gas state CO2 and/or CO2 mix, so do not run them gasless. Secure cylinders upright and never weld on a closed container.

FAQ for welders

What gas does ER70S-6 need?

YESWELDER and TOOLIOM state 100% CO2 or a mix of 80% Ar and 20% CO2. PGN and Blue Demon state CO2 and/or a CO2 mix. Match the gas to what your wire’s label calls for.

Is .035 good for auto body work?

Yes, per the listings. YESWELDER states auto body repairs among the uses and says the wire suits sheet metal on high welding current without burn through; TOOLIOM also states auto body repairs.

Should I buy a 10 lb 2-pack or a 33 lb spool?

PGN and TOOLIOM sell 10 lb 2-packs; YESWELDER and Blue Demon sell 33 lb spools. The 2-pack splits the same 20 lb across two spools. Check that your machine’s drive fits the spool you buy.

Can these wires run without gas?

No. All four are solid ER70S-6 wires, and the listings that mention shielding gas state CO2 and/or a CO2 mix. Self-shielded flux core is a different wire.

What is ER70S-6?

Per YESWELDER’s listing, it is the most common copper-coated mild steel GMAW (MIG) wire, for single or multiple pass welding. The four wires here are all ER70S-6 in .035 diameter.

Can I weld thicker plate with .035 using multiple passes?

PGN states its wire suits single-pass and multi-pass welding, and YESWELDER states single or multiple pass welding. PGN states its wire suits single-pass and multi-pass welding, and YESWELDER states single or multiple pass welding, so multiple passes build up with .035.

Related: best MIG welding wire, best wire for gasless MIG welder, how to choose a MIG welder, what causes porosity in MIG welds and the MIG welders hub.

More buying guides

Welding Consumables ·

MIG Welding Wire Types and Which to Buy

ER5356, ER4043 and ER70S-6 cover aluminum and mild steel MIG work: aluminum wire for aluminum alloys, mild steel wire for steel, matched by diameter…