030 vs 045 Flux Core Wire: Which Should You Buy?
Three gasless flux core wires compared by diameter, spool size and stated use: two .030 wires and one .045 wire, for farm, shop and repair welding.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Blue Demon E71TGS X .045” X 10 LB MIG Flux Core9.6/10View on Amazon - 2
LINCOLN ELECTRIC CO ED031448 .030 NR-2119.6/10View on Amazon - 3
.030" Flux Core Welding Wire9.6/10View on Amazon
Verdict: 030 vs 045 flux core wire. Pick .030 for quick repairs: the Lincoln NR-211 .030 and the E71T-GS .030 two-pack are gasless wires, and the E71T-GS lists all-position work on farm equipment, fence posts and bodywork. Pick .045 for bigger spools and longer runs: the Blue Demon example is a 10 pound spool of .045 gasless wire. The three listings state no safety certification, and only the Blue Demon listing mentions warranty, to say there is none.
A repair on the bench decides the wire before the welder does: fence posts want a different wire than a long run on a trailer frame. This 030 vs 045 flux core wire comparison puts three gasless wires side by side, two .030 examples against one .045, using only what each listing states.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
The three wires
| # | Product | Gear Score | Buy |
|---|---|---|---|
| 1 | Blue Demon E71TGS X .045” X 10 LB MIG Flux Core | 9.6/10 | Buy on Amazon |
| 2 | LINCOLN ELECTRIC CO ED031448 .030 NR-211 | 9.6/10 | Buy on Amazon |
| 3 | .030" Flux Core Welding Wire | 9.6/10 | Buy on Amazon |

Blue Demon E71TGS X .045” X 10 LB MIG Flux Core
Blue Demon's 10 pound spool of .045 E71TGS gasless wire is the heavyweight pick of this comparison.
Pros
- 10 pound spool, the largest here, for longer runs
- Gasless E71TGS wire with all-position welding stated
- Easy slag removal stated in the listing
- DCEN power source stated clearly
Cons
- The listing states no additional warranty
- No bead appearance or fit-up claims are stated, unlike the Lincoln
- 10 pounds is the heaviest spool here to store and load

LINCOLN ELECTRIC CO ED031448 .030 NR-211
Lincoln's NR-211 .030 inner shield wire on a 1 pound spool is the name-brand pick for small repairs.
Pros
- NR-211 inner shield wire from Lincoln Electric
- Excellent weld and bead appearance stated
- Freezing characteristics accommodate poor fit-up, per the listing
- Mild steel flux-core wire in a 1 pound spool for small jobs
Cons
- Bullets state a 1.1 lb package weight while the table states a 1.2 pound item weight
- No power source is stated on the listing
- No positions are stated, unlike the other two listings
- No warranty term is stated

.030" Flux Core Welding Wire
This E71T-GS .030 two-pack brings gasless, all-position wire with vacuum-packed spools for outdoor repairs.
Pros
- Gasless E71T-GS wire with no shielding gas required
- All-position welding with single and multi-pass support stated
- Smooth arc action with less spatter stated
- Vacuum-packed spools protect against moisture, per the listing
Cons
- The 4.09 pound spec-table weight covers the 2-pack; the bullets state 2 lbs net per spool
- No warranty term is stated
Other welders and gear to compare
YixangDD 2 Pack 030 Flux Core Welding WireCheck price on Amazon
VEVOR Flux Core MIG Welding WireCheck price on Amazon
4-Pack 0.030" Flux Core Welding WireCheck price on Amazon
Flux Core Welding Wire .030Check price on Amazon
RUBIK 0.030" Flux Core Gasless Mig Wire-E71T-GS 2Pcs 2-PoundCheck price on Amazon
Flux Core Welding WireCheck price on Amazon
Side by side
| Blue Demon E71TGS .045 | Lincoln NR-211 .030 | Harukiku E71T-GS .030 2-Pack | |
|---|---|---|---|
| Wire diameter | .045 inch | .030 inch | .030 inch |
| Spool | 10 lb | 1 lb | 2 lb per spool, 2-pack |
| Wire type | E71TGS, gasless | NR-211, inner shield | E71T-GS, gasless |
| Positions | All position | Not stated | All positions |
| Power source | DCEN | Not stated | AC |
| Weight | 10 pounds (10.5 lb package) | 1.2 pounds (1.1 lb package) | 2 lbs net per spool |
Treat the specs as maker ratings pulled straight from the listings; we gathered them on 22 October 2026. A figure from one listing describes that listing only.
030 vs 045 flux core wire: diameter
The Lincoln example and the E71T-GS example are both .030 inch wire, while the Blue Demon example is .045 inch wire. The .030 side has two examples to the .045 side’s one. The listings state diameter clearly, so the split is real, but they do not state rated thickness, so neither side wins on thickness.
Spool size
Spool size is where the listings differ most. The Blue Demon example is a 10 pound spool (10.5 pounds package weight). The E71T-GS example is a 2-pack of 2 pound spools, with the listing stating an actual net weight of 2 lbs per spool and the spec table listing 4.09 pounds for the pack; the bullets are the more plausible source, so the review trusts them. The Lincoln example is a 1 pound spool, with the bullets stating a package weight of 1.1 lb and the spec table stating an item weight of 1.2 pounds.
Wire type and use
All three are gasless flux core wires: the Lincoln is NR-211 inner shield, and the other two are E71T-GS. The E71T-GS example lists all-position welding with single and multi-pass support, naming farm equipment, fence posts and automotive bodywork, and says the flux vaporizes to form its own shield, which suits windy outdoor work. The Lincoln listing highlights excellent weld and bead appearance and freezing characteristics that accommodate poor fit-up. The Blue Demon listing names all-position welding with easy slag removal. The Blue Demon spec table lists installation method as gas-welding, which contradicts the gasless title and bullets; the title and bullets win.
Power source
Two listings state a power source and one does not. The Blue Demon example lists DCEN. The E71T-GS example lists AC. The Lincoln example states no power source, so the comparison leaves that unclear for the Lincoln rather than calling it a win or a loss.
Choose .030 flux core wire if
- You want a .030 wire for the repairs the E71T-GS listing names: farm equipment, fence posts and automotive bodywork.
- You want the Lincoln NR-211 example for its stated bead appearance and poor fit-up tolerance.
- You want the E71T-GS example for all-position, gasless work outdoors in wind.
Choose .045 flux core wire if
- You want the biggest spool here: the Blue Demon example is a 10 pound spool of .045 wire.
- Your welder runs DCEN, which the Blue Demon listing states.
- You do longer runs where a 1 or 2 pound spool would run out mid-job.
Before You Strike an Arc
- Match the wire diameter to the welder: .030 or .045, per the listings.
- Check polarity: the Blue Demon listing states DCEN, and the E71T-GS listing states AC.
- All three wires run gasless, so no cylinder is needed for any of them.
- The E71T-GS two-pack arrives vacuum-packed; keep opened spools dry.
FAQ for welders
Can I run .030 and .045 on the same welder?
The listings state wire diameter only: .030 for the Lincoln and E71T-GS examples, .045 for the Blue Demon. The Blue Demon listing states DCEN and the E71T-GS listing states AC, while the Lincoln listing states no power source. Check your welder’s manual for the wire sizes and polarity it supports.
Do these wires need shielding gas?
No. The Lincoln is an inner shield wire, and the E71T-GS and Blue Demon listings both state gasless operation with the flux forming its own shield. That suits outdoor work where wind would blow gas away.
What is the difference between E71T-GS and NR-211 here?
The listings name two wire types: Lincoln NR-211 inner shield and E71T-GS. Both are gasless flux core wires in these listings. The Lincoln listing highlights bead appearance and tolerance for poor fit-up, while the E71T-GS listing highlights all-position welding with low spatter.
Which spool size should I buy?
Match the spool to the job. The Blue Demon example is a 10 pound spool for longer runs. The E71T-GS example is a 2-pack of 2 pound spools, and the Lincoln example is a 1 pound spool, which suit small repairs.
Related: best flux core wire for beginners, flux core vs MIG for outdoor use, flux core vs stick for farm repairs, and the welding consumables hub. Also see our best MIG wire for car restoration.
Scoring, line by line
The Gear Score weighs performance, build, value, safety and warranty. None of the three listings states a safety certification, so that weight scores zero across the picks. Only the Blue Demon listing mentions warranty, to state there is none. How We Pick explains the weights.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Blue Demon E71TGS .045 | 9.6 | 30 | 21 | 20 | n/a | 0 |
| Lincoln NR-211 .030 | 9.6 | 30 | 21 | 19 | n/a | 0 |
| Harukiku E71T-GS .030 2-Pack | 9.6 | 29 | 20 | 20 | n/a | 0 |
Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.




