Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Thread Pitch Gauge Chart: Common Sizes and Pitches

A thread pitch gauge chart of the metric, imperial, US and Whitworth pitches the 4 gauges in this guide cover, from blade sets to a nut and bolt checker.

Thread Pitch Gauge Chart: Common Sizes and Pitches
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 15 Pcs Thread Pitch Gauges Measure Tool5 Pcs Thread Pitch Gauges Measure Tool9.7/10View on Amazon
  2. 2ChgImposs 2PCS Metric & Imperial & US Screw GaugeChgImposs 2PCS Metric & Imperial & US Screw Gauge9.6/10View on Amazon
  3. 380 PCS Detachable Thread Gauges, Double Etched80 PCS Detachable Thread Gauges, Double Etched9.6/10View on Amazon
  4. 4PEC Tools Screw Pitch Gauge, 0.25–2.50mm PitchPEC Tools Screw Pitch Gauge, 0.25–2.50mm Pitch9.6/10View on Amazon

An unknown bolt on the bench needs its thread named before it can be matched, and a thread pitch gauge chart is the reference that names it. The chart below lists the metric, imperial, US and Whitworth pitches the gauges in this guide cover. The gauges check thread size on bolts, nuts, molds and machine threads, and the center gauges set the angle on a lathe tool.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

5 Pcs Thread Pitch Gauges Measure Tool

5 Pcs Thread Pitch Gauges Measure Tool

Quapkatt9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5-piece stainless set with 51 and 52 blade gauges plus 3 center gauges, covering metric, SAE and Whitworth threads.

Pros

  • 51-blade SAE gauge and 52-blade metric, SAE and Whitworth gauge
  • 3 center gauges for lathe tool grinding and positioning
  • Stainless steel with chrome finish and anti-rust oil
  • Measures internal and external threads

Cons

  • No storage case is stated
  • Only 2 of the 5 pieces are pitch gauges
  • Center gauges suit lathe work, not thread checking
  • No hardness figure is stated for the blades
ChgImposs 2PCS Metric & Imperial & US Screw Gauge

ChgImposs 2PCS Metric & Imperial & US Screw Gauge

ChgImposs9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-piece stainless gauge set covering metric, imperial and US threads at 55 and 60 degrees, with a lock device.

Pros

  • Covers metric, imperial and US threads in 2 gauges
  • 55 and 60 degree blades for Whitworth and metric threads
  • Lock device holds the blades in place
  • Stainless blades with a wire-drawn surface, not easy to rust

Cons

  • No storage case is stated
  • US pitches are a short list: 8, 10, 11, 14, 19 and 28
  • No hardness figure is stated for the blades
  • No item weight is stated
80 PCS Detachable Thread Gauges, Double Etched

80 PCS Detachable Thread Gauges, Double Etched

Giwaelro9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 80-piece detachable checker set in a foam holder, with 40 metric sizes in red and 40 inch sizes in blue.

Pros

  • 80 detachable gauges in a foam holder
  • 40 metric sizes in red, 40 inch sizes in blue
  • Sizes etched on both sides of each gauge
  • Screw a nut or bolt on for a fast size check

Cons

  • Checks nuts and bolts by fit, not pitch with blades
  • Identifies size, not thread angle
  • Loose gauges can be misplaced without the foam holder
  • No warranty term is stated
PEC Tools Screw Pitch Gauge, 0.25–2.50mm Pitch

PEC Tools Screw Pitch Gauge, 0.25–2.50mm Pitch

PEC Tools9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 28-leaf metric pitch gauge from 0.25 to 2.50 mm, with hardened and tempered steel blades made in the USA.

Pros

  • 28 leaves from 0.25 to 2.50 mm pitch
  • Every blade stamped with its thread size
  • Hardened and tempered steel blades
  • Narrow blades check internal and external threads

Cons

  • Metric only, no imperial or US pitches stated
  • Range tops out at 2.50 mm
  • No individual pitch list is stated, only the range
  • No warranty term is stated

Thread pitch gauge chart

The chart gives the pitch range for each thread system, and the gauge sets that cover it. Metric pitches are in millimeters, imperial and Whitworth pitches are in threads per inch, marked with a G.

Thread system Pitch range Gauge sets
Metric 0.25 to 6.0 mm ChgImposs, Quapkatt, PEC Tools (0.25 to 2.50 mm)
Whitworth, imperial 4G to 62G ChgImposs, Quapkatt
US, SAE SAE 4 to 84 Quapkatt (ChgImposs lists 8, 10, 11, 14, 19, 28)
Inch nuts and bolts 2-56 to 1-12 Giwaelro

The ChgImposs metric (on Amazon) blades run 6.0, 5.5, 5.0, 4.5, 4.0, 3.5, 3.0, 2.5, 2.0, 1.75, 1.5, 1.25, 1.0, 0.9, 0.8, 0.75, 0.7, 0.6, 0.5, 0.45, 0.4, 0.35, 0.3 and 0.25. The imperial blades run 4G, 4 1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 13G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 25G, 26G, 28G, 30G, 32G, 36G, 40G, 48G, 60G and 62G.

The Giwaelro metric (on Amazon) sizes run M2-0.4 to M24-3.0 and the inch sizes run 2-56 to 1-12, while the PEC gauge covers 0.25 to 2.50 mm in 28 leaves.

Side by side

Gear Score Pieces Metric Imperial Angles
Quapkatt 5-Pc Gauge Set 9.7/10 5 pieces; 51 and 52 blades 0.25-6.0 mm pitch 4G-62G; SAE 4-84 55 and 60 degrees
ChgImposs 2-Pc Gauge Set 9.6/10 2 gauges 0.25-6.0 mm pitch 4G-62G; US 8, 10, 11, 14, 19, 28 55 and 60 degrees
Giwaelro 80-Pc Checker Set 9.6/10 80 gauges M2-0.4 to M24-3.0 sizes 2-56 to 1-12 sizes Not stated
PEC Tools 28-Leaf Gauge 9.6/10 28 leaves 0.25-2.50 mm pitch Not stated Not stated

Ranges come from the listings. The ChgImposs and Quapkatt sets cover metric, imperial and US threads, while the PEC gauge is metric only and the Giwaelro set checks nuts and bolts by size.

Blade gauge or nut and bolt checker

Blade gauges and checkers do the same job in different ways. The ChgImposs, PEC and Quapkatt sets are blades: the PEC blades are stamped with their thread size and the Quapkatt numbers are clearly marked, and the blades measure internal and external threads. The Giwaelro set works the other way: screw the nut or bolt onto the gauge, and the fit names the size in seconds. See how to use a thread gauge for the steps.

The center gauges belong to the lathe. The Quapkatt center gauges grind and position thread cutting tools, and the ChgImposs gauge checks the angle on the thread cutting tool on the V-groove of the gauge. If the job is cutting threads on a metal lathe, the center gauge is the piece that sets the tool angle.

The gear for this job

The measuring step needs a blade gauge matched to the thread system, and the lathe step needs a center gauge, so these 4 cover the measuring step and the lathe step.

For more options, see our metal fab tools guides.

FAQ for welders

What is a thread pitch gauge?

It is a set of blades, each stamped with a thread size, used to check whether thread size determination is correct. The blades measure internal and external threads on bolts, nuts, molds and machine threads. The Giwaelro set is different: it is a checker set that names a nut or bolt size by fit.

How is a nut or bolt checked with a thread gauge?

Screw the nut or bolt onto the thread gauge. The fit names the size in seconds, and the gauge that fits is the size to order or match. The Giwaelro set works this way, with 80 detachable gauges in a foam holder.

What is a center gauge for?

A center gauge grinds and positions thread cutting tools on a lathe. The Quapkatt set holds 3 center gauges, at 55 and 60 degrees, and the ChgImposs gauge checks the angle on the thread cutting tool on the V-groove of the gauge.

What thread systems do these gauges cover?

Metric, imperial, US and Whitworth. The ChgImposs and Quapkatt sets cover metric from 0.25 to 6.0 mm and imperial from 4G to 62G, the Quapkatt SAE (on Amazon) gauge covers 4 to 84, and the PEC gauge covers metric from 0.25 to 2.50 mm only.

Do thread pitch gauges work on internal and external threads?

Yes. The PEC gauge states its narrow blade design permits use for checking both internal and external screw threads, and the Quapkatt set states its blades accurately measure internal and external threads.

Related: how to use a thread gauge, feeler gauge size chart, best digital caliper under 100, and the precision measuring hub. See also the micrometer vs caliper. Also see our best dial bore gauge for engine building. Also see our best bore gauge. Also see our best dial bore gauge for the money.

More buying guides