Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Tig Welder for Aluminum and Stainless Steel (2026): 3 AC/DC Picks

Three AC/DC TIG welders for aluminum and stainless steel, compared on output, input voltage, aluminum thickness, pulse control and what comes in the box.

Best Tig Welder for Aluminum and Stainless Steel (2026): 3 AC/DC Picks
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Eastwood TIG 220Best OverallEastwood TIG 2209.5/10View on Amazon
  2. 2HAXIAOER HXT200PMost ModesHAXIAOER HXT200P9.4/10View on Amazon
  3. 3AIXZGLOBAL AIT200PMost PortableAIXZGLOBAL AIT200P9.4/10View on Amazon

A cracked aluminum bracket and a stainless exhaust flange land on the same bench, and each needs a clean TIG bead that holds up in service. Aluminum calls for AC output, stainless steel calls for DC, and a shop that welds each metal wants a machine that covers each side. This guide compares the best tig welder for aluminum and stainless steel picks from what each listing states: output, input voltage, aluminum thickness, welding modes and what comes in the box.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Eastwood TIG 220: 220 amp output, dual voltage, a WP-17F torch, foot pedal and helmet in the box. Check price on Amazon
  • Most Modes HAXIAOER HXT200P: Six welding modes, a large LCD display and a full accessory kit on a 220V supply. Check price on Amazon
  • Most Portable AIXZGLOBAL AIT200P: Dual voltage 110V and 220V in an 8.3 kg unit with a carrying handle. Check price on Amazon

The machines

Eastwood TIG 220 AMP AC/DC TIG Welder and Stick

Eastwood TIG 220 AMP AC/DC TIG Welder and Stick

Eastwood9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 220 amp AC/DC TIG welder that runs on 120V or 240V, welds 1/4 inch material and thicker, and arrives with a WP-17F flex-head torch, a foot pedal and an auto-darkening helmet.

Pros

  • 220 amp output, the highest here, with AC/DC TIG and stick in one machine
  • Runs on 120V or 240V, so it moves between shop circuits
  • WP-17F flex-head torch with a gas lens kit and a foot pedal in the box
  • Auto-darkening helmet included, with a 4.57 by 3.19 inch viewing area

Cons

  • No warranty term is stated in the listing
  • Bundled helmet duplicates gear for a welder who already owns one
  • Adjustable AC waveform, balance and frequency add setup steps for a welder who wants simple controls
  • No gas regulator is named among the included accessories
HAXIAOER 200A TIG Welder AC DC with Pulse 220V

HAXIAOER 200A TIG Welder AC DC with Pulse 220V

haxiaoer9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 200 amp, 220V AC/DC TIG welder with six welding modes, pulse control and a large LCD display, plus a full accessory kit.

Pros

  • Six welding modes in one machine, from pulse TIG to spot TIG and stick
  • Welds aluminum from 0.5 to 5 mm and metals to 10 mm
  • Large LCD display shows current, voltage and mode
  • Full accessory kit in the box, with a gas regulator and flowmeter included

Cons

  • 220V only, so it needs a 220V supply wired in
  • No warranty term is stated in the listing
  • No foot pedal is named among the included accessories
  • Six modes add menu steps for a welder who only needs AC/DC TIG
200A AC/DC TIG Welder,110V/220V Aluminum Welding

200A AC/DC TIG Welder,110V/220V Aluminum Welding

AIXZGLOBAL9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 200 amp dual-voltage AC/DC TIG welder that weighs 8.3 kg, welds aluminum up to 3/8 inch on 220V, and runs pulse, spot and stick modes.

Pros

  • Dual voltage 110V and 220V for more shop circuits
  • Weighs 8.3 kg with a built-in carrying handle
  • Aluminum from 1/32 inch on 110V to 3/8 inch on 220V
  • Built-in protections for phase loss, voltage, overcurrent and overheating

Cons

  • Foot pedal is sold separately, not included
  • 2T and 4T trigger modes add setup choices for a welder who wants a single trigger mode
  • Aluminum thickness caps at 3/8 inch on 220V and 15/64 inch on 110V
  • Sine wave and square wave switching adds a setting a beginner must learn

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Max output Input voltage Aluminum thickness Processes Foot pedal
Eastwood TIG 220 9.5/10 220A 120V and 240V 1/4 in and thicker AC/DC TIG, Stick, Pulse Included
HAXIAOER HXT200P 9.4/10 200A 220V 0.5 to 5 mm 6-in-1 AC/DC TIG, Stick, Pulse Not named
AIXZGLOBAL AIT200P 9.4/10 200A 110V and 220V Up to 3/8 in on 220V 5-in-1 AC/DC TIG, Stick, Pulse Sold separately

Specifications are as published on each listing and collected 15 November 2026.

How to pick the best tig welder for aluminum and stainless steel

AC/DC output and aluminum thickness

Aluminum needs AC output to break up the oxide layer, while stainless steel welds on DC, so an AC/DC machine covers each metal in this guide. All three machines here list AC/DC TIG and stainless steel among the metals they weld. The Eastwood lists 220 amp output and welding 1/4 inch material and thicker. The HAXIAOER lists 200 amp output with aluminum from 0.5 to 5 mm and metals to 10 mm. The AIXZGLOBAL lists 200 amp output with aluminum from 1/32 inch to 15/64 inch on 110V and up to 3/8 inch on 220V. Match the stated thickness range to the metal you weld most, and note that the AIXZGLOBAL range changes with input voltage.

Input voltage

Input voltage decides where the machine can run. The Eastwood runs on 120V or 240V, the AIXZGLOBAL on 110V or 220V, and the HAXIAOER on 220V only. A dual-voltage machine moves between shop circuits, while a 220V-only machine needs that supply wired in. Check the circuit in your shop before you order.

Pulse and arc controls

Pulse TIG alternates between peak and base current, which lowers heat input on thin material. All three machines list pulse TIG. The Eastwood adds adjustable AC waveform, balance, frequency and start and end amperage. The HAXIAOER adds Hot Start and Arc Force control, and the AIXZGLOBAL adds Hot Start, Arc Force and Anti-Stick for stick welding, plus adjustable pre-flow, post-flow and up and down slope controls. High-frequency start, listed on the HAXIAOER and the AIXZGLOBAL, lights the arc without touching the tungsten to the work.

What comes in the box

The kit in the box decides how soon you can weld. The Eastwood includes a WP-17F flex-head torch with a gas lens kit, a foot pedal and an auto-darkening helmet with a 4.57 by 3.19 inch viewing area. The HAXIAOER includes a TIG torch, ground clamp, electrode holder, gas regulator with flowmeter, gas hose and power cables, and lists no foot pedal. The AIXZGLOBAL is compatible with an optional foot pedal, sold separately. If pedal control matters to you, the Eastwood is the only pick here with one in the box.

Weight and portability

Only the AIXZGLOBAL states a weight, 8.3 kg, with a built-in carrying handle, so it is the clear pick for carrying between benches or to a job site. The Eastwood lists an inverter design in a smaller footprint, and the HAXIAOER lists a sturdy structure for long-term use, but neither listing states a weight.

Use as directed. TIG welding gives off arc flash, fumes and spatter, so wear a welding helmet, gloves and flame-resistant clothing, and weld in a ventilated space. Keep the gas cylinder upright and chained, and keep the ground clamp on clean metal. Never weld on galvanized metal without ventilation and a respirator, and never weld a closed container.

Before You Strike an Arc

  • Match the input voltage to the circuit: the Eastwood runs on 120V or 240V, the AIXZGLOBAL on 110V or 220V, and the HAXIAOER on 220V.
  • Check the torch, ground clamp, gas hose and regulator on arrival.
  • Set AC for aluminum and DC for stainless steel before you strike an arc.
  • Fit the gas lens kit on the Eastwood torch for wider gas coverage on stainless steel.
  • Clamp the ground to clean metal on the workpiece, and keep the bench clear of anything that can burn.

FAQ for welders

Can one TIG welder handle both aluminum and stainless steel?

Yes, when it lists AC/DC output. Aluminum welds on AC and stainless steel on DC, and all three machines here list AC/DC TIG plus stainless steel among the metals they weld.

What thickness of aluminum can a 200 amp TIG welder handle?

It depends on the machine and the input voltage. The HAXIAOER lists aluminum from 0.5 to 5 mm on its 220V supply, and the AIXZGLOBAL lists aluminum from 1/32 inch to 15/64 inch on 110V and up to 3/8 inch on 220V.

Do I need a foot pedal for TIG welding?

A foot pedal gives hands-free heat control, which helps on aluminum and thin stainless steel. The Eastwood includes a foot pedal in the box, the AIXZGLOBAL takes an optional foot pedal sold separately, and the HAXIAOER lists no foot pedal.

What input voltage do these TIG welders need?

The Eastwood runs on 120V or 240V, the AIXZGLOBAL on 110V or 220V, and the HAXIAOER on 220V only. A dual-voltage machine plugs into either supply, while the HAXIAOER needs a 220V circuit.

Related: TIG welders, best TIG welder for aluminum, best welder for beginners, AC TIG vs DC TIG welder, best TIG rod for aluminum, best TIG rod for stainless steel and best shielding gas for TIG welding.

Scoring, line by line

Each welder is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. No listing here states a safety standard or a warranty term, so every welder here scores zero on those two criteria, and the ranking comes from the other three.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Eastwood TIG 220 9.5 30 21 20 0 0
HAXIAOER HXT200P 9.4 29 20 20 0 0
AIXZGLOBAL AIT200P 9.4 28 20 20 0 0

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure.

More buying guides