Best Sandblasting Gloves (2026): 5 Picks for the Cabinet
Five rubber sandblasting gloves for cabinet work, compared on length, width, opening, lining, grip and the warranty each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallVornixon 24.5 in9.6/10View on Amazon - 2
Longest GlovesHOLDWIN 24.8 in9.6/10View on Amazon - 3
Double-Layer PickAltozor 23.6 in9.6/10View on Amazon - 4
Two-Pack ValueHOLDWIN 23.6 in9.6/10View on Amazon
Abrasive grit finds every gap in a cabinet setup, and bare hands pay for it first. The best sandblasting gloves put a thick rubber barrier between your hands and the blast stream while you hold parts steady and keep the cabinet sealed. This guide compares rubber gloves on what each listing states: length, width, opening, lining, grip and warranty.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall Vornixon 24.5 in: Canvas sleeves, an 8 inch opening and the only 1 year warranty here. Check price on Amazon
- Longest Gloves HOLDWIN 24.8 in: A 24.8 inch length in thick rubber with a textured palm and a 6 month warranty. Check price on Amazon
- Double-Layer Pick Altozor 23.6 in: Thickened double-layer protection, a cotton lining and a 23.6 inch length. Check price on Amazon
- Two-Pack Value HOLDWIN 23.6 in: A pack of 2 in medium with a cotton lining and a 7.3 inch opening. Check price on Amazon
The machines

Sandblaster Gloves 24.5"
A 24.5 inch rubber glove with canvas sleeves and an 8 inch opening, carrying the only 1 year warranty here.
Pros
- 1 year manufacturer warranty, the longest term stated here
- Canvas sleeves over the rubber for full arm coverage
- 8 inch opening fits most standard cabinets, per the listing
- Textured surface for grip with flexibility for detailed work
Cons
- Title says 24.5 inches while a bullet says 62 cm, 24.4 inches
- No width stated in the listing
- No weight stated in the listing

HOLDWIN Heavy Duty Sandblasting Gloves Rubber
The longest glove here at 24.8 inches, in thick rubber with a textured palm and a 6 month manufacturer warranty.
Pros
- Longest stated length here at 24.8 inches
- Thick, soft rubber with a textured palm to prevent slipping
- 6 month manufacturer warranty stated
- Wear tips included: wash before first use and check for holes
Cons
- No opening diameter stated
- No width stated in the title or bullets
- Rubber may carry a smell, per the wear tips

Altozor 23.6" Blast Gloves for Abrasive Blasting
A 23.6 inch glove in PU, PVC and rubber with a cotton lining, double-layer protection and a 6 month warranty.
Pros
- Double-layer thickened protection to avoid sand leakage
- Cotton lining for comfort
- Rough rubber surface for grip
- 6 month warranty stated
Cons
- No opening diameter stated
- No weight stated in the listing
- Listing calls the gloves oversized, with no size options stated

HOLDWIN Rubber Sandblaster Gloves for Abrasive
A 23.6 inch rubber glove with a cotton lining and a 7.3 inch opening, sold as a pack of 2.
Pros
- Pack of 2, per the spec table
- Cotton lining for comfort during extended use
- Rough rubber surface for a firm grip
- 7.3 inch opening stated, the only stated opening besides 8 inches
Cons
- No warranty term in the listing
- Green is the only colour stated
- Medium is the only size stated
- Opening is 7.3 inches, smaller than the 8 inch openings elsewhere

Jewboer 23.6" Rubber Sandblast Cabinet
A 23.6 inch rubber glove with an 8 inch opening and an interlock lining, with a thickened particle palm.
Pros
- 8 inch opening stated
- Interlock lining absorbs sweat, per the listing
- Palm thickened twice over with a particle surface
- Fits most sandblasting cabinets, per the listing
Cons
- No warranty term in the listing
- No size options stated beyond the stated dimensions
- No care or wash guidance stated
Other welders and gear to compare
TUFF-Blast Neoprene Gloves for Sandblasting Sandblaster SandCheck price on Amazon
weyleity 23.6" Rubber Sandblasting Sandblaster GlovesCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Length | Width | Opening | Material | Warranty |
|---|---|---|---|---|---|---|
| Vornixon 24.5 in | 9.6/10 | 24.5 in | Not stated | 8 in | Rubber and canvas | 1 year |
| HOLDWIN 24.8 in | 9.6/10 | 24.8 in | Not stated | Not stated | Rubber | 6 months |
| Altozor 23.6 in | 9.6/10 | 23.6 in | 11.8 in | Not stated | PU, PVC and rubber | 6 months |
| HOLDWIN 23.6 in | 9.6/10 | 23.6 in | 11 in | 7.3 in | Rubber | Not stated |
| Jewboer 23.6 in | 9.6/10 | 23.6 in | 11 in | 8 in | Rubber | Not stated |
Ratings in this table are the makers’ own claims taken from each product page (11 November 2026).
How to pick the best sandblasting gloves
Length and fit
Lengths here run from 23.6 to 24.8 inches, and the longest glove covers the most arm. Widths run from 11 to 11.8 inches where stated, and openings run 7.3 to 8 inches. Match the length and opening to your cabinet so your arms stay covered and the cuff sits on the ring.
Material and lining
Every glove here is rubber, and the Altozor adds PU and PVC to the mix. Linings differ: cotton on the Altozor and the green HOLDWIN, interlock on the Jewboer, and canvas sleeves on the Vornixon. A lining matters on long sessions, when sweat builds up inside a sealed glove.
Grip
Rough rubber, particle palms and textured surfaces all aim at the same job: holding small parts steady while grit hits them. The Altozor and the green HOLDWIN use a rough rubber surface, the Jewboer uses a particle palm, and the 24.8 inch HOLDWIN uses a textured palm. A smooth palm would let parts slip at the worst moment.
Opening diameter
The opening is the cuff that fits over the cabinet ring. Two gloves here state an 8 inch opening, and the green HOLDWIN states 7.3 inches. Two listings state no opening at all, so check the ring size on your cabinet before you order.
Warranty
Three listings state a warranty: 1 year on the Vornixon and 6 months on the Altozor and the 24.8 inch HOLDWIN. The other two state no term, so they score zero on warranty. A stated term is the only promise in writing, and it is worth weighing beside length and lining.
Use as directed. Inspect each glove for holes before first use, as the HOLDWIN wear tips advise, and wash the gloves before first use if the listing advises it. Keep the cabinet sealed while blasting, keep your arms covered, and replace a glove that lets grit through.
Before You Strike an Arc
- Check the opening diameter against your cabinet rings: two listings state 8 inches and one states 7.3 inches.
- Inspect each glove for holes before first use, as the HOLDWIN wear tips advise.
- Wash the gloves before first use and keep them out of direct sunlight after washing.
- Confirm the gloves fit your cabinet before blasting, since three listings say they fit most cabinets.
- Match the glove length to your cabinet so your arms stay covered through the session.
For more options, see our welding safety gear guides.
FAQ for welders
What are sandblasting gloves made of?
Rubber is the base material on every glove here, and the Altozor lists PU, PVC and rubber. The Vornixon adds high-density canvas sleeves over the rubber. Linings vary by listing: cotton on two gloves, interlock on the Jewboer, and canvas sleeves on the Vornixon.
How long should sandblasting gloves be?
The gloves here run from 23.6 to 24.8 inches long, and the longest glove covers the most arm. Length matters because the glove has to reach from the cabinet ring to your hands with room to move. Pick a length that covers your arms through the work you do.
Will sandblasting gloves fit most cabinets?
Three listings here say the gloves fit most sandblasting cabinets. The opening still matters: two gloves state an 8 inch opening and one states 7.3 inches. Measure your cabinet rings and compare them with the stated opening before you order.
Should I wash sandblasting gloves before first use?
The HOLDWIN wear tips advise washing before first use, since rubber can carry a smell, and checking for holes at the same time. After washing, keep the gloves out of direct sunlight so they last longer. The other listings state no wash guidance.
What does the opening diameter do?
The opening is the cuff that fits over the cabinet ring and seals the glove to the cabinet. An opening that matches the ring keeps grit inside the cabinet and off your arms. Two gloves here state 8 inches and one states 7.3 inches, while two listings state no opening.
Related: best welding gloves under 15, best stick welding gloves, best welding gloves for fabrication, and gauntlet vs short welding gloves.
Scoring, line by line
Each glove is scored on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. No listing here states a safety certification, so every glove scores zero on that criterion; the ranking comes from the other four.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Vornixon 24.5 in | 9.6 | 28 | 21 | 20 | n/a | 2 |
| HOLDWIN 24.8 in | 9.6 | 29 | 21 | 20 | n/a | 2 |
| Altozor 23.6 in | 9.6 | 28 | 20 | 20 | n/a | 2 |
| HOLDWIN 23.6 in | 9.6 | 28 | 20 | 21 | n/a | 0 |
| Jewboer 23.6 in | 9.6 | 28 | 20 | 20 | n/a | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.




