Best Welding Gloves Under 15 (2026): 4 Picks
Best welding gloves under 15: four leather gloves compared on thickness, stitching, lining, heat ratings and warranties.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
1.5mm CowhideAOUCHI Cowhide L9.6/10View on Amazon - 2
Kevlar StitchingWells Lamont 10549.6/10View on Amazon - 3
932°F HeatPROTEGRE 14 in9.6/10View on Amazon - 4
2.11mm CowhideQeeLink 14 in9.5/10View on Amazon
Verdict. The AOUCHI pairs 1.5mm cowhide, a cotton lining and a stated 1 year warranty. The Wells Lamont pairs Kevlar stitching with ANSI abrasion 4. The PROTEGRE states 932°F. The QeeLink uses fireproof stitching.
Best welding gloves under 15 is about leather thickness, stitching and lining: gloves that stop spatter and heat without cooking your hands. All four listings here are leather, with Kevlar stitching on two of them.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- 1.5mm Cowhide AOUCHI Cowhide L: 1.5mm cowhide with a cotton lining and a stated 1 year warranty. Check price on Amazon
- Kevlar Stitching Wells Lamont 1054: Kevlar stitching with ANSI abrasion level 4. Check price on Amazon
- 932°F Heat PROTEGRE 14 in: 932°F stated with Kevlar stitching and foil insulation. Check price on Amazon
- 2.11mm Cowhide QeeLink 14 in: 2.11mm cowhide with fireproof stitching. Check price on Amazon
The machines

Cowhide Leather Work Gloves,Gardening,Welding
An AOUCHI 1.5mm cowhide glove with a cotton lining, flexible knuckles and a stated 1 year manufacturer warranty.
Pros
- 1.5mm top-grain cowhide stated
- 1 year warranty stated
- 100% cotton lining
- Flexible knuckle design
Cons
- 250°F, lower than PROTEGRE stated
- S-XL, Large listed
- No numbered abrasion rating
- No sleeve length stated

Wells Lamont Men's Welding Gloves
A Wells Lamont split cowhide glove with Kevlar stitching, a cotton liner, a 5-inch gauntlet cuff and ANSI abrasion level 4.
Pros
- Kevlar stitching throughout
- ANSI abrasion level 4
- Fully lined, cotton liner
- 5 in gauntlet cuff
Cons
- No thickness stated
- Not flame retardant
- Manufacturer defects, no term
- 12.48 oz, heaviest stated

Welding Gloves 14” – 932°F Heat Resistant Leather
A PROTEGRE 14-inch leather glove with a stated 932°F rating, Kevlar stitching and aluminum foil insulation.
Pros
- 932°F heat stated
- Kevlar stitching
- Aluminum foil insulation
- 14 in with 7.5 in sleeve
Cons
- No warranty stated
- 1.2mm, thinnest stated
- No abrasion rating stated
- Blue and yellow, not for everyone

QeeLink Welding Gloves for Men
A QeeLink 14-inch cowhide glove with fireproof leather and stitching, stated for MIG and stick welding, with a 3 month warranty.
Pros
- 2.11mm leather stated
- Fireproof stitching stated
- 14 in length
- 3 month warranty stated
Cons
- No lining stated
- No abrasion rating stated
- 3 months, shorter term
- 0.39 kg, no oz figure
Other welders and gear to compare
Welding GlovesCheck price on Amazon
TOPDC 14Inch Welding Gloves 482°F Heat Resistant Leather forCheck price on Amazon
OZERO Welding Gloves: 932°F Heat Resistant GlovesCheck price on Amazon
SAFEGEAR Cowhide Leather Work Gloves with Keystone ThumbCheck price on Amazon
HLDD HANDLANDY 2 Pairs Leather Work Gloves for Men & WomenCheck price on Amazon
Leather Welding & Gardening Gloves for WomenCheck price on Amazon
Spec sheet comparison
| Factor | AOUCHI | Wells Lamont | PROTEGRE | QeeLink |
|---|---|---|---|---|
| Leather | 1.5mm cowhide | Split cowhide | 1.2mm cowhide | 2.11mm cowhide |
| Stitching | Standard | Kevlar | Kevlar | Fireproof stated |
| Lining | Cotton | Cotton | Flame-retardant cotton | Not stated |
| Heat rating | 250°F brief | Not numbered | 932°F stated | Not numbered |
| Length | Large, 9.5 in | X-Large, 14 in | 14 in, 7.5 in sleeve | 14 in |
| Warranty | 1 year | Manufacturer defects | No warranty | 3 months |
All specs here repeat what the maker rates and the listing prints, copied down 20 October 2026. Heat ratings are listing claims, not measured figures.
Buying guide: best welding gloves under 15, what matters
Leather thickness
The AOUCHI states 1.5mm premium top-grain cowhide; the QeeLink states 2.11mm; the PROTEGRE states 1.2mm. The Wells Lamont states split cowhide without a thickness. Thicker leather stops more heat and spatter but costs dexterity; the AOUCHI pairs 1.5mm with a flexible knuckle design for torch work.
Stitching: Kevlar vs standard
The Wells Lamont states Kevlar thread throughout with fully welted seams; the PROTEGRE states Kevlar thread at reinforced stress points; the QeeLink states fireproof leather and stitching. Stitching is where cheap gloves fail first: melted seams end a glove even when the leather survives. Kevlar stitching is the durability upgrade here.
Lining and comfort
The AOUCHI states a 100% cotton lining that absorbs sweat for long sessions; the Wells Lamont states a fully lined build with a cotton liner for added heat protection; the PROTEGRE states a flame-retardant cotton liner with a soft insulated feel. The QeeLink states no lining. A lined glove stays wearable through a long bead; an unlined one gets clammy fast.
Heat ratings
The PROTEGRE states 932°F heat resistance with aluminum foil insulation; the AOUCHI states brief exposure up to 250°F. The Wells Lamont states heat protection without a number and notes the gloves are not flame retardant. Heat ratings are listing claims: read them as direction, not as measured limits.
Length and cuff
The QeeLink states 14 inches; the PROTEGRE states 14 inches with a 7.5-inch forearm sleeve; the Wells Lamont states a 5-inch gauntlet cuff. Longer coverage stops sparks at the sleeve line. For TIG work at a bench, the AOUCHI’s shorter glove gives more wrist freedom.
Warranties
The AOUCHI states a 1 year manufacturer warranty, the only concrete term here. The QeeLink states 3 months. The Wells Lamont states manufacturer’s defects, and the PROTEGRE states no warranty. On sub-15 gloves, the leather and stitching matter more than the warranty.
Fit: sizes stated
The AOUCHI states sizes S through XL, the widest stated range here. The Wells Lamont states X-Large. The QeeLink states a standard adult fit. The PROTEGRE states size 14 with a regular fit. A glove that swims on your hand is a hazard around a torch: you lose the torch, not just comfort. If you are between sizes on the listings that state them, the smaller one usually wins for TIG work, where the AOUCHI’s flexible knuckle design is aimed.
Weight on the hand
The Wells Lamont states 12.48 oz, the heaviest stated weight here. The AOUCHI states 6.45 oz. The QeeLink states 0.39 kg. The PROTEGRE states no weight. Heavier usually means more leather and lining between you and the heat, which the 12.48 oz Wells Lamont bears out with its full lining and 5-inch gauntlet cuff. Lighter means less fatigue on long days, which is where the 6.45 oz AOUCHI sits. There is no free choice here, only the trade you prefer.
Closures and cuffs
The QeeLink states a button closure. The Wells Lamont and PROTEGRE state pull-on. The AOUCHI states adjustable wrist straps that block dust, debris and sparks. A button or strap keeps the cuff shut against falling spatter; a pull-on goes on fastest between jobs. None of the four states an elastic wrist, so what the listing states is what holds the cuff.
Reinforcements: palms, thumbs, knuckles
The AOUCHI states reinforced split-leather overlays on high-friction palms plus suede-reinforced palms for grip on tools, pipe and steel. The Wells Lamont states a reinforced cowhide thumb shield, a reinforced palm and fully welted seams. The PROTEGRE states Kevlar thread at reinforced stress points. The QeeLink states no reinforcements. Palms and thumbs wear first on a welding glove, so the stated reinforcements are where the money shows.
Care: what the listings state
The AOUCHI states the most care detail: clean the leather with a damp cloth and mild soap, then condition; machine wash the cotton, and do not dry on high heat. The Wells Lamont and QeeLink state hand wash. The PROTEGRE states clean with a damp cloth and allow to air dry. Leather gloves and water are a short story: damp cloth, air dry, condition when they stiffen. The listings agree on that much.
Listing contradictions to know
Two listings disagree with themselves. The PROTEGRE title states 14 in while its bullets state a 16-inch length with a 7.5-inch forearm sleeve; the spec table states 14 inches for glove length. The same listing states waterproof as true in one field and not water resistant in another. The title and bullets win over spec tables, so read the PROTEGRE as the 16-inch figure from its bullets and treat the waterproofing as unconfirmed. The other three listings show no internal contradictions on the figures above.
Abrasion and cut ratings: what the listings state
Only one listing states a rated abrasion figure: the Wells Lamont claims ANSI abrasion level 4, with Kevlar stitching throughout and fully welted seams. The PROTEGRE states abrasion, tear, puncture, cut and oil resistance with no level attached. The AOUCHI states abrasion protection from its 1.5mm top-grain cowhide and split-leather palm overlays, again with no level. The QeeLink states no abrasion rating at all. A stated rating beats an unstated claim when the gloves will drag across rough steel, so read the listing, not the adjectives.
Which glove for which job
Start from the work. For forge, fireplace and blacksmithing alongside MIG and stick, the QeeLink states that exact mix, with the thickest stated leather at 2.11mm, a 14 in length and fireproof stitching. For long sessions where comfort matters, the AOUCHI is the only one stating a cotton lining plus a 1 year warranty. For rough handling where seams die first, the Wells Lamont states Kevlar stitching throughout, a reinforced thumb shield and ANSI abrasion level 4. For hot work, the PROTEGRE states 932 degrees F with Kevlar stitching and foil insulation. None of the four does everything; the listings make the tradeoffs plain.
FAQ for welders
Can I TIG weld in these gloves?
The AOUCHI states its gloves are ideal for TIG and MIG welding with a flexible knuckle design; the PROTEGRE states MIG and TIG uses. Thick gloves cost dexterity, so the AOUCHI’s thinner cut suits TIG best here. See the MIG gloves vs TIG gloves comparison.
Are these gloves flame retardant?
The Wells Lamont notes its gloves are not flame retardant. The PROTEGRE states a flame-retardant cotton liner and fireproof leather. No glove here replaces fire-rated gear.
What does Kevlar stitching do?
The Wells Lamont and PROTEGRE listings state Kevlar thread at the seams and stress points, which survives heat and abrasion that would cut standard thread. Seams are the usual failure point on a welding glove.
Which of these states a warranty?
The AOUCHI states 1 year and the QeeLink states 3 months. The Wells Lamont states manufacturer’s defects and the PROTEGRE states no warranty.
Related: the MIG gloves vs TIG gloves comparison, the best welding gloves for flux core welding, the leather vs cotton welding gloves comparison and the best welding gloves for fabrication.
Scoring, line by line
Each glove is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. The AOUCHI scores on build for 1.5mm cowhide and on warranty for the stated 1 year; the Wells Lamont scores on build for Kevlar stitching and ANSI abrasion 4; the PROTEGRE scores on performance for 932°F stated; the QeeLink scores on value with fireproof stitching.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| AOUCHI Cowhide L | 9.6 | 29 | 19 | 19 | n/a | 3 |
| Wells Lamont 1054 | 9.6 | 32 | 20 | 20 | n/a | 0 |
| PROTEGRE 14 in | 9.6 | 30 | 20 | 20 | n/a | 0 |
| QeeLink 14 in | 9.5 | 28 | 19 | 19 | n/a | 1 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.




