Best Plasma Cutter Torch Under 100: 5 Picks
Five replacement plasma cutter torches under $100 compared by amperage, cable length, arc start, consumables and machine fit.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallCuwiny PT-31 4m9.6/10View on Amazon - 2
Longest CableRIVERWELD PT-31 16 ft9.5/10View on Amazon - 3
Pilot Arc Pickbestarc AG60P 13 ft9.5/10View on Amazon - 4
Body OnlyRIVERWELD WSD-60P Body9.4/10View on Amazon - 5
Spare PickKERUE AG60 13.2 ft9.3/10View on Amazon
The torch on the CUT-50 is spitting instead of cutting, the consumables are worn to nubs, and the question is whether to rebuild or replace the whole gun. For the best plasma cutter torch under 100, the answer is usually a complete replacement torch: new cable, new head and a fresh set of consumables, matched to your machine’s torch family. These five are all replacement torches, compared by amperage, cable length, arc start, consumables and fit.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall Cuwiny PT-31 4m: Complete 4m torch with HF ignition, 60% duty cycle, consumables and CE listing. Check price on Amazon
- Longest Cable RIVERWELD PT-31 16 ft: 5m (16 ft) complete torch rated 30/40A with 12mm max cutting stated. Check price on Amazon
- Pilot Arc Pick bestarc AG60P 13 ft: 13 ft HF pilot arc torch for 50/60A with consumables installed. Check price on Amazon
- Body Only RIVERWELD WSD-60P Body: 40-60A pilot arc torch body for CUT50, CUT60 and CUT70 machines. Check price on Amazon
- Spare Pick KERUE AG60 13.2 ft: 13.2 ft complete AG60 torch fitting CUT45 through CUT60 models. Check price on Amazon
The machines

Plasma Cutter torch, PT-31 Air Plasma Cutting Gun
A complete PT-31 plasma cutting torch with a 4m (13.12 ft) cable, HF ignition, a stated 60% duty cycle, a 40 second post flow, a consumable set and a stated CE certification.
Pros
- Complete torch with 4m (13.12 ft) cable
- HF ignition with stated 60% duty cycle and 40s post flow
- Consumable set included: electrode, nozzle and cup
- States a CE certification
Cons
- No warranty term is stated
- PT-31 family only: check machine fit
- Duty cycle stated without a temperature
- 3.09 lb, mid-weight here

Bestarc AG60P Pilot Arc Plasma Cutting Torch
A complete AG60P plasma cutting torch with a 13 ft cable, HF pilot arc ignition, a 50/60A rating and a consumable set installed on the torch head.
Pros
- HF pilot arc ignition stated
- 50/60A rating for Bestarc and AG60P-compatible cutters
- Consumable set installed: nozzle, electrode, ring, cup
- Pure copper joints with CNC integrated processing stated
Cons
- No warranty term is stated
- No safety listing is stated
- No duty cycle is stated
- AG60P family only: check machine fit

RIVERWELD PT-31 LG-40 Plasma Cutting Torch
A complete PT-31 plasma cutting torch with the longest cable here at 5m (16 ft), rated 30/40A with a stated 12mm maximum cutting thickness.
Pros
- 5m (16 ft) cable, the longest here
- Rated 30/40A with 12mm max cutting stated
- Wide fit list: PT-31, JG-40, WSD-LG40, CUT50D, CUT-50, CT-312, CUT40
- 2.64 lb, the lowest stated weight here
Cons
- No arc start type is stated
- No consumables are stated
- No warranty term is stated
- No safety listing is stated

RIVERWELD WSD-60P Plasma Cutting Torch Body Head
A pilot arc start torch body and head for 40 to 60A machines, for CUT50, CUT60 and CUT70 cutters, with no cable in the box.
Pros
- Pilot arc start stated
- 40 to 60A rating covers CUT50, CUT60 and CUT70
- 9.5 oz head is light to hold
- Copper plastic body with polished finish stated
Cons
- Body and head only: no cable included
- No consumables are stated
- No warranty term is stated
- Model number and title state different capacity classes

AG60 SG55 WSD-60 Air Plasma Cutting Hand Torch Gun
A complete AG60 air plasma cutting hand torch with a 13.2 ft (4m) cable, listing CUT45 through CUT60 compatibility, at 4.07 lb.
Pros
- Complete torch with 13.2 ft (4m) cable
- Wide CUT45 to CUT60 compatibility list
- Heat-resistant build with stated heat dissipation
- 4.07 lb, a solid hand feel
Cons
- No amperage is stated
- No arc start type is stated
- No consumables are stated
- No warranty term or safety listing is stated
Other welders and gear to compare
Bestarc Pilot Arc Plasma Cutting TorchCheck price on Amazon
Lotos CL133 Plasma Cutting Torch 3 Prong Switch Connector forCheck price on Amazon
RIVERWELD PT-31 Air Plasma Cutting Torch Head Body XL 20072Check price on Amazon
ARCCAPTAIN AG-60 Plasma Cutter Torch ConsumablesCheck price on Amazon
Reboot Plasma Cutter Torch 40A PT31 16FT High Duty Cycle forCheck price on Amazon
Spec sheet comparison
| Model | Shop Score | Amps | Cable | Arc start | Consumables | Fit | Warranty |
|---|---|---|---|---|---|---|---|
| Cuwiny PT-31 4m | 9.6/10 | PT31-50A | 4m (13.12 ft) | HF ignition | Electrode, nozzle, cup | PT-31, JG-40, WSD-LG40, CUT50, CUT40 | Not stated |
| bestarc AG60P 13 ft | 9.5/10 | 50/60A | 13 ft | HF pilot arc | Nozzle, electrode, ring, cup | AG60P-compatible cutters | Not stated |
| RIVERWELD PT-31 16 ft | 9.5/10 | 30/40A | 5m (16 ft) | Not stated | Not stated | PT-31, JG-40, WSD-LG40, CUT50 | Not stated |
| RIVERWELD WSD-60P Body | 9.4/10 | 40-60A | Body only | Pilot arc | Not stated | CUT50, CUT60, CUT70 | Not stated |
| KERUE AG60 13.2 ft | 9.3/10 | Not stated | 13.2 ft (4m) | Not stated | Not stated | CUT45-CUT60 models | Not stated |
All specs here repeat what the maker rates and the listing prints, copied down 19 October 2026. Where a listing states a figure two ways, the table shows both.
Buying guide: what matters in the best plasma cutter torch under 100
Torch body only or complete torch
Four of the five are complete torches with cable; the RIVERWELD WSD-60P is a torch body and head only, for a 40 to 60A machine, with no cable in the box. A complete torch swaps in one piece when the cable is cracked or the head is worn. A body-only head makes sense only if the cable and handle you have are still good.
Amperage and fit
Match the torch to the machine first. The WSD-60P is stated for 40 to 60A machines including CUT50, CUT60 and CUT70. The Cuwiny is a PT31 rated 50A for ESAB and L-TEC PT-31, JG-40 and WSD-LG40 machines. The RIVERWELD PT-31 is rated 30/40A for CUT50D, CUT-50, CT-312 and CUT40, with a stated 12mm maximum cutting thickness. The bestarc AG60P is a 50/60A torch for Bestarc BTC500DP, BTC650DP and CUT55P plus other AG60P-compatible cutters. The KERUE states no amperage but lists CUT45 through CUT60 compatibility. An AG60 torch does not fit a PT-31 machine and vice versa, so check the family before ordering.
Cable length
Stated lengths run 13 to 16 ft: the Cuwiny at 4m (13.12 ft), the RIVERWELD PT-31 at 5m (16 ft), the bestarc at 13 ft and the KERUE at 13.2 ft (4m). Longer cable reaches around a project without moving the cutter, but it also drags across more of the shop floor. The WSD-60P body states no cable because it ships none.
Arc start: HF and pilot arc
Three of the five state their start type. The Cuwiny states HF ignition, the bestarc states HF pilot arc ignition, and the WSD-60P is a pilot arc start torch. Pilot arc lets the torch start on rusted or painted metal without touching the workpiece. The RIVERWELD PT-31 and KERUE state no start type, which is a listing gap.
Duty cycle and post flow
Only the Cuwiny states a duty cycle: 60%, with a 40 second post flow. No other listing here states either figure. Duty cycle matters on long straight cuts, so if you cut long beads on thick plate, the one stated figure on this page belongs to the Cuwiny.
Consumables in the box
The Cuwiny ships one set: 1 electrode, 1 nozzle and 1 cup. The bestarc ships a set installed on the torch head: 1 nozzle, 1 electrode, 1 ring and 1 cup. The other three listings state no consumables, so plan a consumable kit with the order. See our plasma cutting consumables guide for what wears and how the parts fit together.
Cutting safety. Plasma cutting throws sparks and molten metal and produces intense light and fumes. Use the shade, gloves and flame resistant clothing your manual specifies, keep the work area clear of anything that can burn, and disconnect power before changing consumables.
Torch build: neck, handle and materials
The torch head and handle get the heat, so the build detail is worth reading. The Cuwiny PT-31 lists a flex and durable neck, a high-quality plastic handle and stainless steel plus pure copper construction at 3.09 lb. The bestarc AG60P lists pure copper joints with CNC integrated processing and a 13 ft cable. A flexible neck reaches into corners a stiff torch cannot, and the handle material matters when the torch runs hot on long cuts. The listings here do not state a duty cycle for the bestarc, so treat it as unstated rather than assuming one.
What ships installed vs what you order later
Every one of the five lists no consumables in the quick-picks sense, so check what actually arrives. The Cuwiny ships one set of consumables with the torch: 1 electrode, 1 nozzle and 1 cup. The bestarc ships one set installed on the torch head: 1 nozzle, 1 electrode, 1 ring and 1 cup. The Cuwiny also states a 60 percent duty cycle with a 40 second post flow, which cools the consumables after the arc stops. One set gets you started, but electrodes and nozzles are wear items: plan a spare kit alongside the torch order, because a torch with no working tip is a paperweight.
Before You Strike an Arc
- Match the torch family to the machine: AG60 and PT-31 torches are not interchangeable.
- Check what consumables ship in the box; three of these five list none, so order a kit with the torch.
- Measure the cable against the work area: 13 to 16 ft here, and the WSD-60P ships no cable at all.
- Disconnect power before changing electrodes, nozzles or cups.
- Confirm the amperage rating covers the machine: 30/40A, 40-60A, 50A and 50/60A are the stated figures here.
FAQ for welders
Will these fit my CUT-50?
Check the family. The WSD-60P lists CUT50, CUT60 and CUT70; the Cuwiny and RIVERWELD PT-31 list CUT50D, CUT-50 and CUT40 among their fits; the KERUE lists CUT50P and CUT50DP; the bestarc fits Bestarc machines and other AG60P-compatible cutters.
What is the difference between the AG60 and PT-31 torches?
They are different torch families for different machines. The WSD-60P, bestarc and KERUE are AG60-family torches; the Cuwiny and RIVERWELD PT-31 are PT-31 family. Buy the family your cutter takes.
What does pilot arc mean?
The torch starts its arc without touching the workpiece, which helps on rusted or painted metal. The bestarc states HF pilot arc ignition, the WSD-60P is a pilot arc start torch, and the Cuwiny states HF ignition.
How long are the cables?
The RIVERWELD PT-31 states 5m (16 ft), the Cuwiny 4m (13.12 ft), the KERUE 13.2 ft (4m) and the bestarc 13 ft. The WSD-60P is a torch body with no cable.
Do any state a warranty or safety listing?
The Cuwiny states a CE certification; no listing here states a warranty term.
Related: the plasma cutting consumables guide, machine torch vs hand torch and pilot arc vs blowback start.
Scoring, line by line
Each torch is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Cuwiny PT-31 4m | 9.6 | 30 | 21 | 21 | 4 | 0 |
| bestarc AG60P 13 ft | 9.5 | 30 | 21 | 20 | 0 | 0 |
| RIVERWELD PT-31 16 ft | 9.5 | 29 | 20 | 21 | 0 | 0 |
| RIVERWELD WSD-60P Body | 9.4 | 26 | 20 | 19 | 0 | 0 |
| KERUE AG60 13.2 ft | 9.3 | 24 | 19 | 20 | 0 | 0 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number.




