Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Pipe Threader Up to 2 Inch (2026): 4 Picks Compared

Four pipe threaders compared on stated die sizes up to 2 inch, electric or ratchet drive, motor power, pipe materials, weight and case contents.

Best Pipe Threader Up to 2 Inch (2026): 4 Picks Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1VEVOR Electric ThreaderBest OverallVEVOR Electric Threader9.5/10View on Amazon
  2. 2Holdwell Electric ThreaderBest Electric SpeedHoldwell Electric Threader9.4/10View on Amazon
  3. 3VEVOR Ratchet KitWidest Die RangeVEVOR Ratchet Kit9.4/10View on Amazon
  4. 4Yaegoo Ratchet KitFor Smaller PipeYaegoo Ratchet Kit9.2/10View on Amazon

Pipe on the bench, a fitting that will not start, and a thread that needs cutting clean before the joint goes together: that is the job the best pipe threader up to 2 inch has to do. This guide compares electric and ratchet threaders on the die sizes the maker states, motor power and speed where stated, pipe materials, weight and what comes in the case.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall VEVOR Electric Threader: 2300W electric threader, 6 dies to 2 inch, 16.8 pounds with case. Check price on Amazon
  • Best Electric Speed Holdwell Electric Threader: 2300W electric threader at 26 RPM, 6 dies to 2 inch. Check price on Amazon
  • Widest Die Range VEVOR Ratchet Kit: Ratchet kit with 7 dies from 3/8 inch to 2 inch. Check price on Amazon
  • For Smaller Pipe Yaegoo Ratchet Kit: Ratchet kit with 4 dies from 1/2 inch to 1-1/4 inch. Check price on Amazon

The machines

VEVOR Electric Pipe Threader

VEVOR Electric Pipe Threader

VEVOR9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A hand-held electric pipe threader with a 2300W motor, 6 dies from 1/2 inch to 2 inch and a carrying case, for plumbing and shop threading work.

Pros

  • 2300W motor with all-copper core coils and 22 RPM no-load speed
  • 6 carbon steel dies from 1/2 inch to 2 inch, replaceable die heads
  • Light electric pick here at 16.8 pounds
  • Includes two replacement carbon brushes, fixed bar, pipe clamp and oil can

Cons

  • No warranty term is stated
  • No-load speed of 22 RPM is lower than the Holdwell pick
  • 110V power is needed, so it does not suit work without power
  • Stated pipe materials are galvanized, iron and plastic only
Holdwell S Electric Pipe Threader

Holdwell S Electric Pipe Threader

Holdwell S9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A hand-held electric pipe threader with a 2300W copper motor, 6 NPT dies from 1/2 inch to 2 inch and a molded carrying case with accessories.

Pros

  • 2300W copper motor with 26 RPM no-load speed stated
  • 6 NPT dies from 1/2 inch to 2 inch in 9SiCr alloy steel
  • Forward/reverse switch and built-in safety lock stated
  • Includes pipe clamp, oil can and replacement carbon brushes

Cons

  • No warranty term is stated
  • Heaviest pick here at approximately 29.5 lbs
  • NPT only, stated as not compatible with BSPT threads
  • 120V power is needed, so it does not suit work without power
VEVOR Ratchet Pipe Threader Kit with 7 NPT Dies

VEVOR Ratchet Pipe Threader Kit with 7 NPT Dies

VEVOR9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A ratchet pipe threader kit with 7 NPT dies from 3/8 inch to 2 inch, hardened 9CrSi dies and a carrying case, for manual plumbing work.

Pros

  • 7 NPT dies from 3/8 inch to 2 inch, widest range here
  • Hardened 9CrSi dies stated for wear resistance
  • Long textured non-slip handle for torque and control
  • Portable carrying case keeps all tools in one place

Cons

  • Manual ratchet drive, so threading is by hand
  • Weighs 26.46 pounds in its case
  • Pipe vise is stated as not included
  • Stated pipe materials do not include plastic pipe
Yaegoo Ratchet Pipe Threader Kit with 4 Dies

Yaegoo Ratchet Pipe Threader Kit with 4 Dies

Yaegoo9.2/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A ratchet pipe threader kit with 4 hinge plate heads from 1/2 inch to 1-1/4 inch and a red ABS plastic storage case, for smaller pipe work.

Pros

  • 4 hinge plate heads at 1/2 inch, 3/4 inch, 1 inch and 1-1/4 inch
  • Longer ergonomic handle stated for more torque with less effort
  • Made of electro-galvanized iron, stated as durable and wear-resistant
  • Red ABS plastic case stores heads and ratchet handle

Cons

  • Largest die is 1-1/4 inch, so it does not thread 2 inch pipe
  • Only 4 dies, fewer than the other kits here
  • Manual ratchet drive, so threading is by hand
  • Weight is Not stated

Spec sheet comparison

Threader Gear Score Type Die sizes Power Weight Case
VEVOR Electric Threader 9.5/10 Electric 1/2 inch to 2 inch, 6 dies 2300W, 110V 16.8 lb Carrying case
Holdwell Electric Threader 9.4/10 Electric 1/2 inch to 2 inch, 6 dies 2300W, 120V 29.5 lb Carrying case
VEVOR Ratchet Kit 9.4/10 Ratchet 3/8 inch to 2 inch, 7 dies Manual 26.46 lb Carrying case
Yaegoo Ratchet Kit 9.2/10 Ratchet 1/2 inch to 1-1/4 inch, 4 dies Manual Not stated ABS plastic case

All specs here repeat what the maker rates and the listing prints, copied down 21 November 2026.

Buying guide: choosing the best pipe threader up to 2 inch

Check the largest die first

The focus here is threading up to 2 inch, so the largest stated die decides fit. The VEVOR electric threader, the Holdwell electric threader and the VEVOR ratchet kit each state dies up to 2 inch. The Yaegoo ratchet kit stops at 1-1/4 inch, with dies at 1/2 inch, 3/4 inch, 1 inch and 1-1/4 inch, so it cannot thread the larger sizes in this guide. The VEVOR ratchet kit states the widest range, from 3/8 inch to 2 inch across 7 dies. The electric picks state 6 dies from 1/2 inch to 2 inch. If your work stays at smaller sizes, a smaller kit can suit; if 1-1/2 inch or 2 inch pipe is on the bench, choose a pick that states those dies.

Electric or ratchet

Electric threaders turn the die with a motor. The VEVOR electric pick states a 2300W motor, 110V and a no-load speed of 22 RPM, with a forward/reverse switch and a security button. The Holdwell electric pick states a 2300W copper motor, 120V and a no-load speed of 26 RPM, with a forward/reverse switch and a built-in safety lock. Ratchet threaders turn by hand. The VEVOR ratchet kit states a long textured non-slip handle for torque and control, and the Yaegoo kit states a longer ergonomic handle for more torque with less effort. Electric picks suit repeated threading where power is at hand; ratchet picks need no power supply and store in a case. For setup basics, see how to use a pipe threader.

Die material and pipe materials

Die material and stated pipe materials differ by pick. The VEVOR ratchet kit states hardened 9CrSi dies. The Holdwell electric pick states dies made from 9SiCr alloy steel and states NPT only, not compatible with BSPT threads. The VEVOR electric pick states carbon steel dies. For pipe materials, the VEVOR ratchet kit states copper, aluminum, galvanized and iron pipes. The Holdwell pick states galvanized steel, carbon steel, iron, copper, aluminum and plastic pipes. The VEVOR electric pick states galvanized, iron and plastic pipes. The Yaegoo kit states steel, galvanized, iron and plastic pipes, and repairing damaged threads. Match the stated materials to the pipe on your bench before ordering.

Weight, case and what is in the box

Weight and included accessories matter on site. The VEVOR electric pick weighs 16.8 pounds and states two replacement carbon brushes, a fixed bar, a pipe clamp and an oil can in the box, with a carrying case. The Holdwell electric pick weighs approximately 29.5 lbs and states a pipe clamp, an oil can and replacement carbon brushes, with a molded carrying case. The VEVOR ratchet kit weighs 26.46 pounds and comes with a portable carrying case; the maker states use with your pipe vise, not included. The Yaegoo kit comes with a red ABS plastic case for the heads and ratchet handle. Check the stated weight against how far the kit travels between jobs.

Before You Strike an Arc

  • Check the die size against the pipe size before the first cut.
  • Confirm the stated voltage on electric picks, 110V on the VEVOR electric pick and 120V on the Holdwell pick.
  • Keep the stated oil can, pipe clamp and spare carbon brushes with the electric kits.
  • Store dies in the stated carrying case so sizes stay sorted.
  • Clamp the pipe as the maker states, with a pipe vise where the maker states one is not included.

FAQ for welders

How does a pipe threader work?

A pipe threader turns a die around the end of a pipe to cut NPT threads. Ratchet picks turn the die with a handle, and electric picks turn the die with a motor and a forward/reverse switch for die release.

What is an electric pipe threader?

An electric pipe threader uses a motor to turn the threading die. The electric picks here state 2300W motors, with no-load speeds of 22 RPM on the VEVOR pick and 26 RPM on the Holdwell pick.

Which picks here thread up to 2 inch?

The VEVOR electric pick, the Holdwell electric pick and the VEVOR ratchet kit each state dies up to 2 inch. The Yaegoo ratchet kit stops at 1-1/4 inch.

Do these threaders work on plastic pipe?

The Holdwell pick states plastic pipes among its materials, the VEVOR electric pick states plastic pipes, and the Yaegoo kit states plastic pipes. The VEVOR ratchet kit states copper, aluminum, galvanized and iron pipes.

Are the dies on these threaders NPT?

Yes, the picks here state NPT dies. The Holdwell pick states NPT only and not compatible with BSPT threads, so check the thread type your fittings need.

Related: how to use a pipe threader, tube tools, best tube cutter set and the sheet metal and tubing hub. Also see our tube cutter vs pipe cutter guide and best large tube cutter picks.

Scoring, line by line

Each threader is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. None of these threaders states an electrical safety listing or a warranty term, so every pick here scores zero on those criteria; the ranking comes from performance, build and value.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
VEVOR Electric Threader 9.5 30 21 21 0 0
Holdwell Electric Threader 9.4 29 20 19 0 0
VEVOR Ratchet Kit 9.4 26 20 20 0 0
Yaegoo Ratchet Kit 9.2 19 18 18 0 0

A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number.

More buying guides