Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Knife Steel for Knife Making (2026): 5 Bars Compared

Five high carbon knife steel bars in 1095, 15N20, 1084 and 5160 steel, compared on bar size, thickness, pack count and stated finish.

Best Knife Steel for Knife Making (2026): 5 Bars Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Dkoryi 15N20Best OverallDkoryi 15N209.7/10View on Amazon
  2. 2Inusbojie 1095Best 1095 PackInusbojie 10959.6/10View on Amazon
  3. 3PATIKIL 1084Best for BeginnersPATIKIL 10849.6/10View on Amazon
  4. 4WENHUALI 1095Thickest StockWENHUALI 10959.5/10View on Amazon

A blank on the bench sets the whole knife. The bar must grind clean, hold an edge after heat treatment, and fit the blade shape in mind, or the work stalls before the handle ever goes on. This guide compares the best knife steel for knife making on bar size, thickness, steel grade, pack count, and the finish each maker states, so the choice fits the blade planned and the shop work ahead.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Dkoryi 15N20: Pre-annealed 15N20 bars, 12 in the pack, 12 x 1.5 x 1/8 inches, with pre-deburred edges and a mill-scale-free surface. Check price on Amazon
  • Best 1095 Pack Inusbojie 1095: Cold rolled and annealed 1095 bars, 10 in the pack, 12 x 1.5 x 0.12 inches, packed in rust-proof paper and bubble bags. Check price on Amazon
  • Best for Beginners PATIKIL 1084: Annealed 1084 bars described by the maker as a go-to for beginner and expert makers, 12 x 1 1/2 x 1/8 inches. Check price on Amazon
  • Thickest Stock WENHUALI 1095: Untreated 1095 bars at 0.24 inch thick, 12 x 2 inches, 5 in the pack, with annealing control left to the buyer. Check price on Amazon

The machines

12Pcs 15N20 Carbon Steel Bar Cold Rolled for Knife

12Pcs 15N20 Carbon Steel Bar Cold Rolled for Knife

Dkoryi9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 12 bar pack of pre-annealed 15N20 bars, 12 x 1.5 x 1/8 inches, with pre-deburred edges and a mill-scale-free surface for grinding.

Pros

  • Pre-annealed and cold rolled, with pre-deburred edges and a mill-scale-free surface
  • Stated tolerance of ±0.1 mm, with laser cutting stated to reduce warpage
  • 12 bars in the pack, the most bars here
  • Superior flatness and consistent hardness stated by the maker

Cons

  • A 1/8 inch thickness limits stock for thicker blade profiles
  • A 1.5 inch width limits blades wider than that width
  • All 12 bars are the same size, so the pack gives no size choice
  • 15N20 is the only steel grade in the pack, with no 1095 or 1084 bar included
(10 Packs) 1095 Steel Flat Stock Cold Rolled

(10 Packs) 1095 Steel Flat Stock Cold Rolled

Inusbojie9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10 bar pack of cold rolled and annealed 1095 bars, 12 x 1.5 x 0.12 inches, packed in rust-proof paper and bubble bags.

Pros

  • Cold rolled and annealed, with precise thickness stated by the maker
  • Superior mechanical properties stated by the maker, with a smooth surface
  • 10 bars in the pack for repeated blades
  • Packed in rust-proof paper and bubble bags, with full money back or replacement stated by the maker

Cons

  • A 0.12 inch thickness limits stock for thicker blade profiles
  • A 1.5 inch width limits blades wider than that width
  • All 10 bars are the same size, so the pack gives no size choice
  • 1095 is the only steel grade in the pack, with no 15N20 or 1084 bar included
PATIKIL 1084 Steel Flat Bar 2 Pcs 12" x 1 1/2" x

PATIKIL 1084 Steel Flat Bar 2 Pcs 12" x 1 1/2" x

PATIKIL9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2 bar pack of annealed 1084 bars, 12 x 1 1/2 x 1/8 inches, described by the maker as a go-to for beginner and expert makers.

Pros

  • Annealed 1084, easy to grind to the shape wanted
  • Cold rolling process with a smooth surface stated by the maker
  • Maker calls 1084 a go-to for beginner and expert persons alike
  • Suitable for a simple everyday carry or kitchen knife, as the maker states

Cons

  • A 2 bar pack gives less stock for repeated practice than larger packs here
  • A 1/8 inch thickness limits stock for thicker blade profiles
  • A 1.5 inch width limits blades wider than that width
  • A finished blade still needs heat treatment after grinding, as the maker notes
WENHUALI 12"x2"x0.24" 1095 Steel for Knife Making

WENHUALI 12"x2"x0.24" 1095 Steel for Knife Making

WENHUALI9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5 bar pack of untreated 1095 bars, 12 x 2 x 0.24 inches, with annealing control left to the buyer.

Pros

  • 1095 high carbon steel with excellent hardness and wear resistance stated by the maker
  • Untreated steel allows annealing control over hardness and toughness
  • 5 bars of 12 x 2 x 0.24 inch stock, enough material for multiple projects as the maker states
  • Smooth surface and machinability make the bars easy to grind, as the maker states

Cons

  • Untreated bars need annealing work before grinding, as the maker describes
  • A 0.24 inch thickness needs more grinding to reach a thin blade edge
  • A 2 inch width limits blades wider than that width
  • No warranty term is stated
Patriot Steel 5160 High Carbon Knife Making

Patriot Steel 5160 High Carbon Knife Making

Patriot Steel9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4 bar pack of hot rolled 5160 bars, 12 x 1.25 x 0.25 inches, milled in the USA in small batches.

Pros

  • 5160 high carbon steel, milled in the USA, with exceptional quality stated by the maker
  • Small batch production and rigorous inspections stated to keep the product consistent
  • Suitable for professional makers and hobbyists alike, as the maker states
  • 4 bars of 12 x 1.25 x 0.25 inch stock for knife making and forging

Cons

  • A 1.25 inch width limits blades wider than that width
  • A 0.25 inch thickness needs more grinding to reach a thin blade edge
  • A 4 bar pack gives less stock than the 10 and 12 bar packs here
  • No warranty term is stated

Spec sheet comparison

Model Gear Score Steel Bar size Thickness Pack count
Dkoryi 15N20 9.7/10 15N20 12 x 1.5 x 1/8 in 1/8 in 12
Inusbojie 1095 9.6/10 1095 12 x 1.5 x 0.12 in 0.12 in 10
PATIKIL 1084 9.6/10 1084 12 x 1 1/2 x 1/8 in 1/8 in 2
WENHUALI 1095 9.5/10 1095 12 x 2 x 0.24 in 0.24 in 5
Patriot Steel 5160 9.5/10 5160 12 x 1.25 x 0.25 in 0.25 in 4

Ratings in this table are the makers’ own claims taken from each product page (22 November 2026).

Buying guide: best knife steel for knife making

Bar size and thickness

Bar size sets the blade that can come from a bar. The WENHUALI bars measure 12 x 2 x 0.24 inches, the Patriot Steel bars measure 12 x 1.25 x 0.25 inches, and the Dkoryi, Inusbojie and PATIKIL bars measure 12 x 1.5 inches, with the Dkoryi and Inusbojie bars at 0.12 inch thick and the PATIKIL bars at 1/8 inch thick. A thicker bar gives more stock to shape and grind away, while a thinner bar starts closer to a finished blade edge.

Steel grade

Steel grade shapes the choice after size. The picks here use 1095, 15N20, 1084 and 5160 steel. WENHUALI and Inusbojie supply 1095, Dkoryi supplies 15N20, PATIKIL supplies 1084, and Patriot Steel supplies 5160. PATIKIL describes 1084 as a go-to for beginner and expert persons alike, with moderate edge retention, and as a choice for a simple everyday carry or kitchen knife. WENHUALI describes 1095 as high carbon steel with excellent hardness and wear resistance, while Inusbojie describes 1095 as high carbon steel with strong rigidity and good resilience.

Pack count and finish

Pack count sets how many blades can start from one order. Dkoryi supplies 12 bars, Inusbojie supplies 10 bars, WENHUALI supplies 5 bars, Patriot Steel supplies 4 bars, and PATIKIL supplies 2 bars. Finish and preparation differ by maker. Dkoryi bars are cold rolled, pre-annealed, pre-deburred and mill-scale-free, with a stated tolerance of ±0.1 mm. Inusbojie bars are cold rolled and annealed, packed in rust-proof paper and bubble bags. PATIKIL bars are annealed and cold rolled with a smooth surface. WENHUALI bars are untreated, so the buyer controls annealing, as the maker states, and Patriot Steel bars are hot rolled in the USA, in small batches with rigorous inspections.

Annealed or untreated

Annealed bars grind with less resistance at the start, while untreated bars leave annealing to the buyer. Dkoryi, Inusbojie and PATIKIL bars are annealed, as each maker states, and WENHUALI bars are untreated 1095 that allows easy annealing. Patriot Steel does not state an annealed condition for its 5160 bars. For a first blade, an annealed bar removes a step before grinding, while an untreated bar suits a buyer who wants control over annealing.

Use as directed. Keep the work area clear, wear eye protection when grinding, clamp the bar before cutting or grinding, and keep hands clear of the grinding wheel and the forge opening. Heat treatment and forging need strong ventilation and a dry work area, with tools and molds dry before they meet hot metal. Keep a fire extinguisher within reach when a forge is lit. Never melt unknown or sealed scrap, and never leave a lit forge unattended.

Before You Strike an Arc

  • Check the bar size, thickness and pack count on arrival against the stated size for that bar.
  • Check the edges for burrs, and check the surface for mill scale before grinding, since Dkoryi states pre-deburred edges and a mill-scale-free surface.
  • Check the packaging for rust protection, since Inusbojie packs its bars in rust-proof paper and bubble bags.
  • Confirm whether the bars are annealed or untreated before grinding, since the picks differ on that point.
  • Confirm the steel grade stated for the bars, since the packs here use 1095, 15N20, 1084 and 5160 steel.

FAQ for welders

Which knife steel suits a first blade?

PATIKIL describes 1084 as a go-to for beginner and expert persons alike, and its bars are annealed and easy to grind. The maker also describes 1084 as a choice for a simple everyday carry or kitchen knife, with moderate edge retention. A 12 x 1.5 x 1/8 inch bar gives a clear starting size.

What thickness of knife steel should I choose?

The WENHUALI bars are 0.24 inch thick and the Patriot Steel bars are 0.25 inch thick, while the Dkoryi and Inusbojie bars are 0.12 inch thick and the PATIKIL bars are 1/8 inch thick. A thicker bar gives more stock to shape, while a thinner bar starts closer to a finished blade. Check the width as well, since widths here include 1.25 inches, 1.5 inches and 2 inches.

How many bars come in each pack?

Dkoryi supplies 12 bars, Inusbojie supplies 10 bars, WENHUALI supplies 5 bars, Patriot Steel supplies 4 bars, and PATIKIL supplies 2 bars. Check the count against the blades planned.

Is 1095 knife steel annealed?

It depends on the maker. WENHUALI 1095 is untreated, and the maker states that untreated steel allows easy annealing with control over hardness and toughness. Inusbojie 1095 is cold rolled and annealed, with precise thickness and superior mechanical properties stated by the maker.

Can 1084 steel make a kitchen knife?

Yes, PATIKIL describes 1084 as a go-to for a simple everyday carry or kitchen knife, with moderate edge retention. Its bars are annealed, cold rolled and easy to grind, with a smooth surface stated by the maker. With the right heat treatment, the maker states that 1084 can become very tough.

Related: best knife steel in order, best high carbon steel for knife making, 1084 vs 1095 knife steel, 1095 vs D2 knife steel, best knife blanks for knife making, best belt grinder for knife making, best 1×30 belt sander for knife making, best oil for carbon steel knife, and what is the best knife steel.

Scoring, line by line

Each bar is scored on performance, build, value, safety listing and warranty, with performance carrying the most weight. Knife steel bars have no electrical safety listing to state, so every bar here scores zero on that criterion; the ranking comes from the other four. A bar that states its size, thickness, finish and pack count clearly scores near the top of its range.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Dkoryi 15N20 9.7 30 22 22 n/a 0
Inusbojie 1095 9.6 29 21 22 n/a 0
PATIKIL 1084 9.6 28 20 20 n/a 0
WENHUALI 1095 9.5 28 20 19 n/a 0
Patriot Steel 5160 9.5 26 19 19 n/a 0

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.

More buying guides