Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Hi Vis Fr T-shirt (2026): 4 CAT2 Picks Compared

Four CAT2 hi-vis FR t-shirts compared on arc rating, fabric weight, reflective trim, pockets and wash life, from what each listing states.

Best Hi Vis Fr T-shirt (2026): 4 CAT2 Picks Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1BOCOMAL FR Crew TeeHighest Arc RatingBOCOMAL FR Crew Tee9.7/10View on Amazon
  2. 2BOCOMAL FR HenleyHenley PickBOCOMAL FR Henley9.7/10View on Amazon
  3. 3KONRECO FR Long Sleeve TeeLight 6 oz PickKONRECO FR Long Sleeve Tee9.6/10View on Amazon
  4. 4VATRENUS FR Crew TeeRelaxed FitVATRENUS FR Crew Tee9.6/10View on Amazon

A repair job runs long when the fit-up fights back, the bead needs another pass, and the shop air turns thick with grinding dust. The shirt on your back should stay out of the way through all of it, and that is the job of the best hi vis fr t-shirt: flame resistant fabric, reflective trim that shows up under shop lights, and a cut that lets arms move without riding up. This roundup compares the shirts on what each listing states, arc rating, fabric weight, reflective trim, pockets and wash life, so the pick matches the work in front of you.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Highest Arc Rating BOCOMAL FR Crew Tee: The highest arc rating here at 11.6 cal/cm2, CAT2, with a chest pocket, rib-knit cuffs and 2-inch reflective trim. Check price on Amazon
  • Henley Pick BOCOMAL FR Henley: A 9.5 cal/cm2 henley with a chest pocket, rib-knit collar and cuffs, and FR protection stated for up to 100 washes. Check price on Amazon
  • Light 6 oz Pick KONRECO FR Long Sleeve Tee: A 6 oz long sleeve tee at 9.5 cal/cm2, CAT2 under the 2023 edition of NFPA 2112, prewashed and preshrunk. Check price on Amazon
  • Relaxed Fit VATRENUS FR Crew Tee: A relaxed fit 6 oz crewneck in 100 percent cotton with a sleeve pocket and 2-inch reflective striping. Check price on Amazon

The machines

BOCOMAL Men's FR Shirts Hi-Vis Reflective Flame

BOCOMAL Men's FR Shirts Hi-Vis Reflective Flame

BOCOMAL9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 7 oz crewneck tee with the highest arc rating here at 11.6 cal/cm2, a chest pocket, rib-knit cuffs and 2-inch reflective trim.

Pros

  • Highest arc rating here, 11.6 cal/cm2 at CAT2 under NFPA 2112
  • Chest pocket and rib-knit cuffs for shop use
  • 2-inch flame resistant reflective trim on the back and arm
  • FR protection stated for up to 100 washes

Cons

  • No warranty term is stated in the listing
  • Heavier 7 oz fabric runs warmer than the 6 oz shirts here
  • Crewneck collar gives no venting on hot days
  • No sleeve pocket, only a chest pocket
BOCOMAL Men's FR Shirts Hi-Vis Reflective Flame

BOCOMAL Men's FR Shirts Hi-Vis Reflective Flame

BOCOMAL9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 7 oz henley with a 9.5 cal/cm2 arc rating at CAT2, a chest pocket, rib-knit collar and cuffs, and 2-inch reflective trim.

Pros

  • Henley collar with rib-knit collar and cuffs
  • Arc rating 9.5 cal/cm2 at CAT2 under NFPA 2112
  • Chest pocket and 2-inch reflective trim
  • FR protection stated for up to 100 washes

Cons

  • No warranty term is stated in the listing
  • Heavier 7 oz fabric runs warmer than the 6 oz shirts here
  • No sleeve pocket, only a chest pocket
  • Henley opening can catch spatter where a crewneck sits flat
KONRECO FR Tee Shirts for Men Hi-Vis 6oz Long

KONRECO FR Tee Shirts for Men Hi-Vis 6oz Long

KONRECO9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A lightweight 6 oz long sleeve tee with a 9.5 cal/cm2 arc rating at CAT2, 2-inch reflective trim and a UL tag on the left arm.

Pros

  • Lightweight 6 oz cotton jersey, prewashed and preshrunk
  • Arc rating 9.5 cal/cm2 at CAT2 under NFPA 2112, 2023 edition
  • 2-inch flame resistant reflective trim on the back and arm
  • FR protection stated for up to 100 washes

Cons

  • No warranty term is stated in the listing
  • No pocket is stated in the listing
  • No collar or cuff style is stated in the listing
  • 6 oz fabric wears thinner than the 7 oz shirts here
VATRENUS FR Shirt for Men 6oz High Visibility

VATRENUS FR Shirt for Men 6oz High Visibility

VATRENUS9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A relaxed fit 6 oz crewneck tee in 100 percent cotton, with an 8.9 cal/cm2 arc rating at CAT2, a sleeve pocket and 2-inch reflective striping.

Pros

  • Relaxed fit 6 oz 100 percent cotton crewneck
  • Sleeve pocket, the only one here
  • Arc rating 8.9 cal/cm2 at CAT2 under NFPA 2112
  • 2-inch flame resistant reflective striping

Cons

  • No warranty term is stated in the listing
  • Lowest stated wash life here, up to 50 washes
  • Lowest arc rating here at 8.9 cal/cm2
  • No chest pocket, only a sleeve pocket

Spec sheet comparison

Model Gear Score Fabric Arc rating Reflective trim Pockets Wash life Style
BOCOMAL FR Crew Tee 9.7/10 7 oz cotton jersey 11.6 cal/cm2, CAT2 2-inch FR trim Chest pocket Up to 100 washes Crewneck
BOCOMAL FR Henley 9.7/10 7 oz cotton jersey 9.5 cal/cm2, CAT2 2-inch FR trim Chest pocket Up to 100 washes Henley
KONRECO FR Long Sleeve Tee 9.6/10 6 oz cotton jersey 9.5 cal/cm2, CAT2 2-inch FR trim Not stated Up to 100 washes Long sleeve tee
VATRENUS FR Crew Tee 9.6/10 6 oz cotton jersey 8.9 cal/cm2, CAT2 2-inch FR trim Sleeve pocket Up to 50 washes Crewneck, relaxed fit

All specs here repeat what the maker rates and the listing prints, copied down 22 November 2026.

What to look for in the best hi vis fr t-shirt

Arc rating and category

All four shirts here carry a CAT2 rating under NFPA 2112, with arc ratings from 8.9 to 11.6 cal/cm2. The BOCOMAL crew tee states the highest arc rating here at 11.6 cal/cm2, while the BOCOMAL henley and the KONRECO tee state 9.5 cal/cm2 and the VATRENUS tee states 8.9 cal/cm2. Each listing also cites ASTM F1506 and NFPA 70E. Match the arc rating on the tag to the arc flash risk of the job, and treat a higher rating as more headroom, not as permission to skip other protection.

Fabric weight

Fabric weight runs from 6 oz to 7 oz across the four shirts. The BOCOMAL crew tee states 7 oz cotton jersey, while the KONRECO and VATRENUS shirts state 6 oz cotton jersey, and the VATRENUS listing states 100 percent cotton. Heavier fabric tends to feel sturdier and drape less, while lighter fabric breathes better on a hot shop floor. Check the weight against the season and the layers worn under the shirt.

Reflective trim

Every shirt here states 2-inch flame resistant silver reflective trim, with more reflective area on the back and arm. The trim is heat sealed, per the listings, and sits on the sleeves and body where shop lights and passing traffic catch it. Check the trim on arrival for full adhesion, and replace the shirt when the trim peels or cracks, since worn trim no longer marks the wearer the same way.

Pockets and fit

Pockets differ across the four shirts. The BOCOMAL henley and the BOCOMAL crew tee state a chest pocket, while the VATRENUS tee states a sleeve pocket and the KONRECO listing names no pocket. Rib-knit cuffs appear on three of the four shirts, and the VATRENUS tee states a relaxed fit while the other listings describe a comfortable fit with prewashed and preshrunk fabric. Check the stated size against the size worn under a welding jacket, since a tight cuff or a short hem rides up when arms reach overhead.

Wash life

FR protection lasts only as long as the treatment holds through washing. Three shirts here state protection for up to 100 washes, while the VATRENUS tee states up to 50 washes. Follow the wash guidance on the tag, keep the shirt free of oil and grease, and retire it when the fabric thins or the trim fails.

Use as directed. A flame resistant shirt is part of the kit, not a substitute for the rest of it. Check the CAT2 tag and the arc rating before work near live electrical parts or open flame, keep the shirt clean of oil, grease and solvents, and wear the helmet, gloves and eye protection the job calls for. See the Safety Disclaimer.

Before You Strike an Arc

  • Check the FR tag on the shirt for the CAT2 rating and the arc rating before the shirt goes on for arc work.
  • Check the 2-inch reflective trim, the cuffs and the collar for full adhesion and a flat lay on arrival.
  • Check the fit over the base layer worn under it, with arms raised, so the hem stays put and the cuffs stay at the wrist.
  • Check the pocket layout against the tools carried in the shop, chest pocket or sleeve pocket, and keep loose items out of the way of the arc.
  • Check the wash guidance on the tag and keep the shirt free of oil and grease between washes.

FAQ for welders

What does CAT2 mean on a flame resistant shirt?

CAT2 is the arc flash PPE category under NFPA 70E, and each shirt here states CAT2 with an arc rating in cal/cm2. The ratings here run from 8.9 to 11.6 cal/cm2, with the BOCOMAL crew tee stating the highest at 11.6 cal/cm2. Match the rating to the arc flash risk of the job, and check the tag on the shirt itself.

How long does the flame resistant protection last?

Three shirts here state protection for up to 100 washes, while the VATRENUS tee states up to 50 washes. Wash life depends on how the shirt is washed and what it picks up in the shop, so follow the guidance on the tag. Retire the shirt when the fabric thins, the trim fails, or the tag no longer reads clearly.

Do these shirts have reflective trim?

Yes, every shirt here states 2-inch flame resistant silver reflective trim, with more reflective area on the back and arm. The trim is heat sealed, per the listings. Check it on arrival for full adhesion, since trim that peels no longer marks the wearer the same way.

Henley or crewneck: which collar suits shop work?

The BOCOMAL henley states a henley collar with rib-knit collar and cuffs, while the BOCOMAL crew tee and the VATRENUS tee state a crewneck. A henley opens at the neck for airflow on hot days, while a crewneck sits flat under a welding jacket. Pick the collar that fits the layers worn over the shirt.

What fabric weight should a hi-vis FR t-shirt be?

The shirts here state 6 oz or 7 oz cotton jersey, all FR treated with FR sewing threads, per the listings. Lighter 6 oz fabric breathes better in heat, while 7 oz fabric feels sturdier. The VATRENUS listing states 100 percent cotton, and the other listings state cotton jersey without a blend figure.

Can a hi-vis FR t-shirt be worn under a welding jacket?

Yes, these are long sleeve tees sized as work shirts, and the listings describe them as made for welders, fitters, ironworkers and electricians. Check the fit with arms raised so the hem and cuffs stay in place under the jacket. Keep the reflective trim visible where the jacket does not cover it.

Related: best FR shirts for summer, best FR coveralls, the FR workwear hub, and the Knife Making and Casting hub. Also see the best welding helmet for people with glasses.

Scoring, line by line

Each shirt is scored on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. Every shirt here states a CAT2 arc rating and a safety standard, so the safety criterion counts. No listing states a warranty term, so every shirt here scores zero on warranty and the ranking comes from the other four criteria.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
BOCOMAL FR Crew Tee 9.7 32 21 21 9 0
BOCOMAL FR Henley 9.7 30 21 21 9 0
KONRECO FR Long Sleeve Tee 9.6 29 20 21 9 0
VATRENUS FR Crew Tee 9.6 28 20 20 8 0

A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number.

More buying guides