Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Fr Long Sleeve Shirts (2026): 4 CAT2 Picks for Welders

Four CAT2 flame resistant long sleeve shirts for welders, compared on fabric weight, arc rating, hi-vis trim, pockets and wash life.

Best Fr Long Sleeve Shirts (2026): 4 CAT2 Picks for Welders
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1KONRECO FR Henley 7ozBest OverallKONRECO FR Henley 7oz9.7/10View on Amazon
  2. 2KONRECO FR Hi-Vis TeeBest Hi-VisKONRECO FR Hi-Vis Tee9.7/10View on Amazon
  3. 3BOCOMAL FR Crew 6ozBest Crew NeckBOCOMAL FR Crew 6oz9.6/10View on Amazon
  4. 4BOCOMAL FR Henley 5.5ozBest LightweightBOCOMAL FR Henley 5.5oz9.6/10View on Amazon

A spark lands on a sleeve while a bead runs long, and cotton that is not flame resistant can catch and keep burning. A flame resistant long sleeve shirt adds a layer between that spark and skin, and the best fr long sleeve shirts pair that protection with cotton a welder can wear all day.

This guide compares four CAT2 shirts on fabric weight, arc rating, hi-vis trim, pockets and wash life, using only what each listing states. All four are CAT2 shirts that meet NFPA 2112, so the differences come down to fabric, features and wash life.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall KONRECO FR Henley 7oz: Highest arc rating here at 11.6 cal/cm2, 7.1 oz cotton, a sleeve pocket and a two-tone style. Check price on Amazon
  • Best Hi-Vis KONRECO FR Hi-Vis Tee: 2-inch reflective trim, 6 oz cotton, arc rating 9.5 cal/cm2 and protection through 100 washes. Check price on Amazon
  • Best Crew Neck BOCOMAL FR Crew 6oz: 6 oz cotton jersey, arc rating 9.5 cal/cm2, chest pocket and protection through 100 washes. Check price on Amazon
  • Best Lightweight BOCOMAL FR Henley 5.5oz: 5.5 oz cotton henley, arc rating 8 cal/cm2, chest pocket and rib-knit cuffs. Check price on Amazon

The machines

KONRECO FR Shirts for Men Long Sleeve 7oz Henley

KONRECO FR Shirts for Men Long Sleeve 7oz Henley

KONRECO9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 7.1 oz cotton henley with the highest arc rating here at 11.6 cal/cm2, a sleeve pocket on the two-tone style and rib-knit cuffs and collar.

Pros

  • Highest arc rating here: 11.6 cal/cm2 at CAT2
  • Heavy 7.1 oz cotton knit, the thickest fabric here
  • Sleeve pocket on the two-tone style holds small tools
  • Rib-knit cuffs and collar close off sparks at the edges

Cons

  • No wash count is stated for FR protection life
  • Loose fit with a long length may bunch under a jacket
  • Two-tone style in 5 options, classic henley in 3
  • No warranty term is stated
KONRECO FR Tee Shirts for Men Hi-Vis 6oz Long

KONRECO FR Tee Shirts for Men Hi-Vis 6oz Long

KONRECO9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6 oz hi-vis cotton shirt with 2-inch reflective trim, an arc rating of 9.5 cal/cm2 and FR protection through 100 washes.

Pros

  • 2-inch reflective trim on back and arm for visibility
  • Arc rating 9.5 cal/cm2 at CAT2
  • FR protection stated through 100 washes
  • Lightweight 6 oz cotton jersey, prewashed and wrinkle-free

Cons

  • Heather Yellow is a hi-vis shade, not a low-key shop color
  • No chest pocket, unlike the two BOCOMAL shirts
  • No warranty term is stated
  • 6 oz fabric carries a lower arc rating than the 7.1 oz henley
BOCOMAL FR Shirts for Men Melt Pocket Midweight

BOCOMAL FR Shirts for Men Melt Pocket Midweight

BOCOMAL9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6 oz cotton jersey crew shirt with an arc rating of 9.5 cal/cm2, a chest pocket, contrast stitching and FR protection through 100 washes.

Pros

  • Arc rating 9.5 cal/cm2 at CAT2
  • FR protection stated through 100 washes
  • Chest pocket with contrast stitching
  • Lightweight 6 oz cotton jersey, prewashed and wrinkle-free

Cons

  • No reflective trim for low-light sites
  • Crew neck gives no placket to open for airflow
  • No warranty term is stated
  • Color stated is Crewneck Black only, with no hi-vis option
BOCOMAL FR Shirts Long Sleeve Henley 5.5oz

BOCOMAL FR Shirts Long Sleeve Henley 5.5oz

BOCOMAL9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5.5 oz cotton knit henley with an arc rating of 8 cal/cm2, a chest pocket, rib-knit cuffs and a relaxed fit, in Navy.

Pros

  • Lowest weight fabric here at 5.5 oz cotton knit
  • Chest pocket and rib-knit cuffs
  • Relaxed fit in a big and tall cut
  • FR tag on the arm and a small FR sample in the package

Cons

  • Lowest arc rating here at 8 cal/cm2
  • FR protection stated through 50 washes, below the 100 washes stated for two other shirts
  • No warranty term is stated
  • No reflective trim for low-light sites

Spec sheet comparison

Model Gear Score Fabric weight Arc rating Standard Reflective trim Wash life Fit
KONRECO FR Henley 7oz 9.7/10 7.1 oz/sq yd 11.6 cal/cm2 NFPA 2112, CAT2 Not stated Not stated Loose fit, long length
KONRECO FR Hi-Vis Tee 9.7/10 6 oz 9.5 cal/cm2 NFPA 2112, CAT2 2-inch silver trim 100 washes Not stated
BOCOMAL FR Crew 6oz 9.6/10 6 oz 9.5 cal/cm2 NFPA 2112, CAT2 Not stated 100 washes Not stated
BOCOMAL FR Henley 5.5oz 9.6/10 5.5 oz 8 cal/cm2 NFPA 2112, CAT2 Not stated 50 washes Relaxed fit

Treat the specs as maker ratings pulled straight from the listings; we gathered them on 22 November 2026.

Buying guide: choosing the best fr long sleeve shirts for shop work

Fabric weight

The shirts here run from 5.5 oz to 7.1 oz per square yard, all cotton knit or cotton jersey. The 5.5 oz BOCOMAL henley is the lowest weight fabric here, while the 7.1 oz KONRECO henley is the heaviest and carries the highest arc rating. A heavier knit adds heat capacity between a spark and skin, but it also adds weight on a long shift. Pick the weight that matches the work: lighter knits for warm shops, heavier knits where spatter is constant.

Arc rating

Arc ratings here run from 8 cal/cm2 to 11.6 cal/cm2, and every shirt is CAT2. The rating is the arc thermal performance value the maker states, and a higher value means more arc energy the fabric is rated to block. The 11.6 cal/cm2 KONRECO henley leads the group, while the 8 cal/cm2 BOCOMAL henley sits at the bottom. Match the rating to the arc flash risk of the work, and keep the shirt as the outer layer over clothing that does not melt.

Hi-vis and reflective trim

Only one shirt here is hi-vis: the KONRECO tee in Heather Yellow, with 2-inch flame resistant silver heat seal reflective trim and more reflection on the back and arm. The other three shirts are plain work colors with no reflective trim. If the job needs the wearer to be seen, on road work or a shared site, the hi-vis shirt is the only pick that covers it. A hooded FR shirt is a different pick; none of these four has a hood.

Pockets and cuffs

Both BOCOMAL shirts have a chest pocket, and the KONRECO two-tone henley adds a sleeve pocket for small tools. The KONRECO hi-vis tee has no pocket. Rib-knit cuffs appear on the BOCOMAL henley and the KONRECO henley, and the KONRECO henley adds a rib-knit collar, so sparks have no open edge to slip past. Cuffs that sit close matter as much as fabric: an open cuff lets spatter reach the forearm.

Wash life

FR protection does not last forever, and the listings state it in washes. The BOCOMAL crew and the KONRECO hi-vis tee both state protection through 100 washes, while the BOCOMAL henley states 50 washes. The KONRECO henley states no wash count, so its FR life is unknown from the listing. All three shirts that state a wash count are prewashed and preshrunk, so the stated count starts from a shirt that has already been washed by the maker.

Fit

Fit decides whether a shirt stays tucked and keeps cuffs closed. The BOCOMAL henley is a relaxed fit in a big and tall cut, and the maker warns against buying a size up. The KONRECO henley is a loose fit with a long length, made to stay tucked during overhead work. Sizes stated here are Large and X-Large, so check the size chart for the shirt before ordering, since a shirt that rides up leaves skin exposed.

Use as directed. Treat an FR shirt as one layer of protection, not a full arc flash suit: wear a helmet, gloves and eye protection with it, keep cuffs closed and the shirt tucked, and keep the fabric free of oil, grease and solvents that can burn. Replace a shirt that is torn, worn thin or stained with flammable material, and wash it as the maker directs. See the OSHA welding overview for shop safety guidance.

Before You Strike an Arc

  • Check the FR tag on the arm and the neck tag before wearing the shirt, and confirm the UL certification and CAT2 rating are printed there.
  • Check cuffs and collar sit closed, and the chest pocket and sleeve pocket sit flat, before striking an arc.
  • Confirm the size before ordering: the BOCOMAL henley is stated big and tall, so do not buy a size up.
  • Keep the shirt free of oil, grease and solvents, and replace it if the fabric is torn or worn thin.

FAQ for welders

What does CAT2 mean on an FR shirt?

CAT2, or HRC2, is the arc flash PPE category the maker states for the shirt, tied to the arc rating the maker states. All four shirts here are CAT2, with arc ratings from 8 cal/cm2 to 11.6 cal/cm2. A higher arc rating means the fabric is rated for more arc energy, so the 11.6 cal/cm2 KONRECO henley leads on that measure.

How long does FR protection last on these shirts?

The listings state it in washes: the BOCOMAL crew and the KONRECO hi-vis tee state protection through 100 washes, and the BOCOMAL henley states 50 washes. The KONRECO henley states no wash count. Wash life is a maker claim, so retire a shirt when the fabric is worn or damaged, even inside the stated count.

Do any of these shirts have hi-vis or reflective trim?

Only the KONRECO hi-vis tee, in Heather Yellow, with 2-inch flame resistant silver heat seal reflective trim on the back and arm. The other three shirts have no reflective trim. If the site needs the wearer to be seen, the hi-vis tee is the only pick here that covers it.

What fabric weight should a welder choose?

The shirts here run from 5.5 oz to 7.1 oz cotton. The 5.5 oz BOCOMAL henley is the lowest weight fabric here and the 7.1 oz KONRECO henley is the heaviest, with the highest arc rating at 11.6 cal/cm2. Lighter knits suit warm shops and long shifts, while heavier knits suit work with constant spatter.

Are these shirts only for welders?

No. The makers list welders, fitters, ironworkers and electricians, and home use as well. Any shop or site work with spark and arc flash risk calls for the same protection. The hi-vis tee also suits road and site work where visibility matters.

Related: best FR shirts for summer, best FR coveralls, best FR hoodie jackets, best FR jeans, leather vs FR cotton welding jacket, best welding jacket for beginners, best safety glasses for welding, and the FR workwear hub. Also see the /Knife Making and Casting/ category.

Scoring, line by line

Each shirt is scored on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. Every shirt here is a CAT2 shirt that meets NFPA 2112, so safety scores reflect the stated rating and the features behind it. No listing states a warranty term, so every shirt scores zero on warranty and the ranking comes from the other four.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
KONRECO FR Henley 7oz 9.7 32 22 21 9 0
KONRECO FR Hi-Vis Tee 9.7 30 21 21 9 0
BOCOMAL FR Crew 6oz 9.6 29 21 21 9 0
BOCOMAL FR Henley 5.5oz 9.6 28 20 20 9 0

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score.

More buying guides