Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Green Welding Gloves (2026): 3 Green Picks, Compared

Three green welding gloves, from wasabi deerskin to long-sleeve cowhide, scored on leather, insulation, fit and the warranty each listing states.

Best Green Welding Gloves (2026): 3 Green Picks, Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Caiman 1816-6Best OverallCaiman 1816-69.7/10View on Amazon
  2. 2AOUCHI Long SleeveBest Long SleeveAOUCHI Long Sleeve9.7/10View on Amazon
  3. 3Cxqunzon GT081BLongest GloveCxqunzon GT081B9.5/10View on Amazon

Hot spatter finds every gap in a thin glove. When the work runs long, the difference between a glove you trust and one you fight is leather, lining and stitching. The best green welding gloves for shop work pair that protection with a color that stays visible on the bench. This guide compares three green gloves on leather, insulation, fit and warranty, scored from what each listing states.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Caiman 1816-6: Wasabi green deerskin with FR foam and fleece insulation and a pulse protector. Check price on Amazon
  • Best Long Sleeve AOUCHI Long Sleeve: 1.5 mm cowhide, cotton lining, Kevlar stitching and a 1 year manufacturer warranty. Check price on Amazon
  • Longest Glove Cxqunzon GT081B: 14 inch MIG gloves in cowhide with a cotton liner, the longest stated here. Check price on Amazon

The machines

Caiman Premium Wasabi Green Split Deerskin

Caiman Premium Wasabi Green Split Deerskin

Caiman9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A wasabi green split deerskin MIG and stick glove with flame-resistant foam and fleece insulation and a pulse protector.

Pros

  • Supple split deerskin with a Kontour pre-curved fit
  • Full sock insulation in flame-resistant foam and fleece
  • Large pulse protector over wrist and forearm
  • Kevlar stitching and double-stitched palm padding

Cons

  • No stated size range beyond X-Large
  • 0.2 inch deerskin, thicker than the cowhide gloves here
  • Care instructions say do not wash
  • 30 day warranty is the shortest stated here
Welding Gloves -Long Sleeve Fireproof and Heat

Welding Gloves -Long Sleeve Fireproof and Heat

AOUCHI9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A long-sleeve black-green cowhide glove with cotton lining and Kevlar stitching, in sizes XS to XXL.

Pros

  • 1.5 mm cowhide with a soft cotton lining
  • Kevlar stitching rated by the listing to 250°C (482°F)
  • Long sleeves shield wrists and forearms
  • 1 year manufacturer warranty in the listing

Cons

  • Color reads black-green, not a bright green
  • Made in the USA claim sits beside an import-style part number
  • Wide multi-use marketing beyond welding
MIG Welding Gloves for Men

MIG Welding Gloves for Men

Cxqunzon9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 14 inch MIG welding glove in cowhide with a cotton liner, the longest stated length here.

Pros

  • 14 inch length for wrist and forearm coverage
  • 1.2 mm cowhide with a 20% cotton liner
  • Fire, heat, flame, oil, puncture and abrasion resistance listed
  • 8.8 ounces with added grip on the palm

Cons

  • No warranty term in the listing
  • Bullets are empty, so detail is thin
  • No size range stated beyond a 14 inch length
  • First listed January 8, 2026, with little history

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Leather Thickness Length Sizes Warranty
Caiman 1816-6 9.7/10 Split deerskin 0.2 inches 14 x 6 x 3 in X-Large 30 Day Limited
AOUCHI Long Sleeve 9.7/10 Cowhide 1.5 mm Long sleeve XS to XXL 1 year manufacturer
Cxqunzon GT081B 9.5/10 Cowhide, cotton liner 1.2 mm 14 inches Not stated None stated

Treat the specs as maker ratings pulled straight from the listings; we gathered them on 23 October 2026.

Buying guide: choosing the best green welding gloves

Leather type and thickness

Two gloves here use cowhide from 1.2 to 1.5 mm, and the Caiman uses split deerskin at a stated 0.2 inches with a lighter, more flexible feel. Thicker leather resists abrasion and spatter longer; thinner leather gives more finger feel for TIG work. The listings state the thickness, so compare them directly instead of guessing by hand.

Insulation and lining

Cotton linings add comfort and a layer of heat insulation in two of the gloves here. The Caiman goes further with full sock insulation in flame-resistant foam and fleece for longer hot sessions. More insulation means more warmth near the arc, and usually less dexterity, so match the lining to the work.

Length and coverage

Long sleeves and gauntlet cuffs keep spatter off wrists and forearms. The AOUCHI long sleeve and the 14 inch Cxqunzon both cover past the wrist, while the Caiman adds a pulse protector over the wrist and forearm. For overhead stick work, longer coverage earns its keep.

Stitching and reinforcement

Kevlar stitching shows up on two listings here, and the Caiman adds double-stitched palm padding with wear patches. Seams fail before leather does, so reinforced stitching is the detail that decides how many months a glove lasts.

Use as directed. Gloves are consumables: check seams and lining before each session, retire a pair with holes or thin spots, and keep them dry between uses. Never treat a heat glove as electrical insulation. See the OSHA welding overview and our Safety Disclaimer.

Before You Strike an Arc

  • Match the glove to the process: the listings here name MIG, TIG and stick, and supple deerskin suits TIG while the long-sleeve cowhide suits stick.
  • Check the size range on arrival: the listings state sizes from XS to XXL, and a glove that swims on your hand is a hazard.
  • Confirm the warranty in writing: one listing here states a 1 year manufacturer warranty and one states 30 days.
  • Keep a spare pair dry and ready; a soaked glove loses insulation and should sit out a session.

FAQ for welders

How do you wash leather welding gloves?

It depends on the listing. The Caiman says do not wash; the Cxqunzon says machine washable. Never soak a lined glove, and let them dry away from direct heat.

Are leather welding gloves heat resistant?

The listings here claim heat and flame resistance in different words: 1.5 mm cowhide against sparks, flame-resistant foam and fleece insulation, and a stated 250°C (482°F) on one listing. Leather buys time against heat, not immunity, so keep clear of prolonged contact.

Are welding gloves shockproof?

No listing here states electrical insulation, so treat these gloves as heat and abrasion protection, not electrical PPE. Dry leather insulates a little, but sweat and damage change that fast. For electrical work, use gloves rated for it.

What do welding gloves protect you from?

The listings name sparks, hot metal, abrasion, cuts, punctures and flame. Longer cuffs add wrists and forearms to that list. They do not protect against everything in the shop, so match the glove to the hazard in front of you.

What size welding glove should I buy?

The listings here run from XS to XXL on the AOUCHI glove, X-Large on the Caiman, and no stated size range on the Cxqunzon. Measure your hand against the listing’s size chart before ordering; a loose glove catches on metal and a tight one tears at the seams.

Related: best leather welding gloves, best TIG welding gloves, best stick welding gloves, best welding gloves for MIG, best material for welding gloves.

Scoring, line by line

Each glove is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. No listing here states a safety certification, so every glove scores zero on that criterion; the ranking comes from performance, build, value and warranty. These gloves sit in the welding gloves green corner of the shop, where hand protection lives.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Caiman 1816-6 9.7 32 22 20 n/a 3
AOUCHI Long Sleeve 9.7 28 21 21 n/a 3
Cxqunzon GT081B 9.5 28 19 20 n/a 0

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.

More buying guides