Best Beam Trolley (2026): 5 Manual Push Picks for Shop Hoists
Five manual push beam trolleys for shop hoists, compared on rated load, flange width, wheels, frame steel and hook style.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallBEAMNOVA 3-Ton Trolley9.5/10View on Amazon - 2
With Work GlovesKARRYTON 3-Ton Trolley9.5/10View on Amazon - 3
Tool-Free InstallMaxsa 1-Ton Trolley9.4/10View on Amazon - 4
Narrowest Beam FitBEAMNOVA 1-Ton 6-Wheel9.4/10View on Amazon
A heavy engine or a long length of steel needs to move sideways across the shop, not just up and down, and a chain hoist hanging from a fixed point cannot do that job alone. A beam trolley turns that hoist into a rolling lift that travels along an overhead I-beam, so the load can move to where the work waits. This roundup covers the best beam trolley picks for a home shop or small fab shop, scored on rated load, flange fit, wheels, frame steel and hook style. Start with the top beam trolley for the load and the beam in the shop.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall BEAMNOVA 3-Ton Trolley: A stated 6614 lb load, a 4.33 to 8.34 inch flange range, manganese steel, and a slip hook with a swivel hook. Check price on Amazon
- With Work Gloves KARRYTON 3-Ton Trolley: A stated 6600 lb load, a 4 to 8 inch flange range, and nitrile palmed work gloves in the box. Check price on Amazon
- Tool-Free Install Maxsa 1-Ton Trolley: A stated 2200 lb load, a 2.5 to 7 inch flange range with 60 washers, and a tool-free, quick-install design. Check price on Amazon
- Narrowest Beam Fit BEAMNOVA 1-Ton 6-Wheel: Fits flanges from 1.57 inches, runs on 6 wheels, and pairs with PA600 to PA1000 electric hoists. Check price on Amazon
The machines

BEAMNOVA 3 Ton Manual I Beam Trolley
A 3-ton manual trolley rated at 6614 lb, with the widest flange range here, 4.33 to 8.34 inches, manganese steel and a slip hook with a swivel hook.
Pros
- Rated at 6614 lb, the highest load here
- Fits flanges from 4.33 to 8.34 inches, the widest range here
- Manganese steel frame, corrosion-resistant, with hex nuts, collision bumpers and anti-drop wire pins
- Slip hook with a swivel hook for manual hoists
Cons
- Flange range starts at 4.33 inches, so narrow beams under that width do not fit
- A 12.0 inch frame needs more beam run than the shorter trolleys here
- A 3-ton frame is oversized for light 1-ton lifts
- No warranty term in the listing

KARRYTON 3Ton/6600LB Beam Trolley 4
A 3-ton manual trolley rated at 6600 lb, fitting flanges from 4 to 8 inches, with dual wheels on each side and work gloves in the box.
Pros
- Rated at 6600 lb with dual smooth wheels on each side
- Fits standard or wide flange beams from 4 to 8 inches
- Heavy-duty carbon steel with a blue baked enamel finish
- Nitrile palmed work gloves included, plus a sturdy lifting ring
Cons
- At 46.7 lb, it is heavy to carry up to the beam
- Flange range starts at 4 inches, so narrow beams under that width do not fit
- A 3-ton frame is oversized for light 1-ton lifts
- No warranty term in the listing

VEVOR Manual Trolley, 4400 lbs/2 Ton Load
A 2-ton manual trolley rated at 4400 lb, fitting flanges from 2.4 to 7 inches, with large-diameter cast steel wheels and a Q235 carbon steel body.
Pros
- Rated at 4400 lb, or 2 tons, with a Q235 carbon steel body
- Fits flanges from 2.4 to 7 inches, or 61 to 178 mm
- Large-diameter cast steel wheels with precision bearings for smooth rolling
- Widened side plates absorb impact and guard the wheel assembly
Cons
- Rated load of 4400 lb sits below the 3-ton trolleys here
- Flange range tops out at 7 inches, so wider beams do not fit
- At 19.73 lb, it is heavier to carry than the 15.87 lb Maxsa
- No work gloves included

BEAMNOVA 1 Ton Manual I-Beam Trolley
A 1-ton manual trolley rated at 2204 lb, fitting flanges from 1.57 to 6.1 inches, with 6 wheels and a fit for PA600 to PA1000 electric hoists.
Pros
- Rated at 2204 lb and fits flanges from 1.57 inches, the narrowest minimum here
- 6 wheels with hardened large steel wheels and double-sealed lubricated ball bearings
- Pairs with PA600, PA700, PA800, PA900 and PA1000 electric hoists
- Manganese steel frame with a powder-coated finish, wear-resistant
Cons
- Rated load of 2204 lb sits below the 2-ton and 3-ton trolleys here
- Flange range tops out at 6.1 inches, so wider beams do not fit
- Fits PA600 to PA1000 hoists, so other hoists need a fit check
- Built for electric hoists, so a manual chain block pairing needs a fit check

1-Ton Heavy Duty Manual Push Beam Trolley
A 1-ton manual push trolley rated at 2200 lb, fitting flanges from 2.5 to 7 inches with 60 washers, and a tool-free, quick-install design.
Pros
- Rated at 2200 lb with dual forged wheels for low-friction movement
- Fits flanges from 2.5 to 7 inches with 60 precision washers
- Tool-free, quick-install design with included hardware
- Anti-drop wire pins, hex nuts and collision bumpers for safety
Cons
- Rated load of 2200 lb is the lowest here
- Flange range starts at 2.5 inches, so narrower beams do not fit
- Pairs with chain hoists, so an electric hoist pairing needs a fit check
- Dual wheels only, where the BEAMNOVA 1-ton trolley runs on 6 wheels
Spec sheet comparison
| Model | Gear Score | Load capacity | Flange width | Wheels | Frame material | Item weight | Warranty |
|---|---|---|---|---|---|---|---|
| BEAMNOVA 3-Ton Trolley | 9.5/10 | 6614 lb | 4.33 to 8.34 in | Dual-axle wheels | Manganese steel | Not stated | None stated |
| KARRYTON 3-Ton Trolley | 9.5/10 | 6600 lb | 4 to 8 in | Dual wheels each side | Carbon steel | 46.7 lb | None stated |
| VEVOR 2-Ton Trolley | 9.4/10 | 4400 lb | 2.4 to 7 in | Dual cast steel wheels | Q235 carbon steel | 19.73 lb | None stated |
| BEAMNOVA 1-Ton 6-Wheel | 9.4/10 | 2204 lb | 1.57 to 6.1 in | 6 wheels | Manganese steel | Not stated | None stated |
| Maxsa 1-Ton Trolley | 9.4/10 | 2200 lb | 2.5 to 7 in | Dual forged wheels | Alloy steel | 15.87 lb | None stated |
All specs here repeat what the maker rates and the listing prints, copied down 22 November 2026.
Buying guide: best beam trolley fit checks
Match the rated load to the hoist
Rated loads here run from 2200 lb to 6614 lb. The 3-ton trolleys rate at 6614 and 6600 lb, the VEVOR rates at 4400 lb, or 2 tons, and the 1-ton trolleys rate at 2204 and 2200 lb. Quote the rated capacity exactly as listed and never exceed it, and never lift a load over people. The BEAMNOVA 1-ton trolley pairs with PA600, PA700, PA800, PA900 and PA1000 electric hoists, while the Maxsa pairs with chain hoists, so match the trolley to the hoist already in the shop.
Match the flange width
Flange fit decides whether a trolley rides the beam at all. The BEAMNOVA 1-ton trolley fits flanges from 1.57 to 6.1 inches, the VEVOR fits 2.4 to 7 inches, the Maxsa fits 2.5 to 7 inches, the KARRYTON fits 4 to 8 inches, and the BEAMNOVA 3-ton trolley fits 4.33 to 8.34 inches. Spacers, sleeves or washers set the fit: the VEVOR adjusts by adding or reducing spacers or sleeves, the KARRYTON ships with multi-sized spacers, the BEAMNOVA 3-ton trolley adjusts with washers, and the Maxsa includes 60 precision washers. Measure the beam flange before ordering.
Wheels and travel
Wheels decide how the trolley rolls under load. The VEVOR runs on large-diameter cast steel wheels with precision bearings, the KARRYTON runs on dual smooth wheels on each side, the BEAMNOVA 3-ton trolley runs on dual-axle wheels, the Maxsa runs on dual forged wheels, and the BEAMNOVA 1-ton trolley runs on 6 wheels with double-sealed lubricated ball bearings. Every trolley here works on straight and curved tracks, and the BEAMNOVA 1-ton trolley also works on straight or tapered beam tracks. Roll the empty trolley along the beam and check for sticking before loading it.
Steel and hooks
Frame steel differs across the five trolleys. The VEVOR body is Q235 carbon steel, the KARRYTON frame is heavy-duty carbon steel with a blue baked enamel finish, the BEAMNOVA trolleys use manganese steel, and the Maxsa frame is high-grade alloy steel. The BEAMNOVA 3-ton trolley is stated as corrosion-resistant, and the BEAMNOVA 1-ton trolley has a powder-coated finish. Hooks differ too: the BEAMNOVA 3-ton trolley carries a slip hook with a swivel hook, and the KARRYTON carries a sturdy lifting ring.
Safety hardware
Anti-drop hardware is the safety story here. The BEAMNOVA 3-ton trolley and the Maxsa both carry anti-drop wire pins, hex nuts and collision bumpers. The KARRYTON adds an extended anti-drop design with anti-rust lock-nuts, and the BEAMNOVA 1-ton trolley uses a side locking nut with an anti-loose design. The VEVOR uses widened side plates to absorb impact and guard the wheel assembly. Check the pins, nuts and hook before each lift, and keep hands clear of the wheels and the beam flange while the trolley moves.
Use as directed. Never exceed the stated load rating, and never lift a load over people. Check the anti-drop pins, nuts and hook before each lift, and keep the path along the beam clear while the trolley moves.
Before You Strike an Arc
- Measure the beam flange and set the spacers or washers to the stated range before the trolley goes on the beam.
- Check the anti-drop wire pins, hex nuts and hook or lifting ring before hanging a hoist.
- Confirm the hook fits the hoist: the BEAMNOVA 1-ton trolley pairs with PA600 to PA1000 electric hoists.
- Roll the empty trolley along the beam and check for sticking before loading it.
- Keep the load clear of people and never exceed the rated load on the trolley.
FAQ for welders
What is a beam trolley?
A beam trolley is a wheeled carrier that rides on the flange of an overhead I-beam and carries a hoist. The hoist hangs from the trolley hook or lifting ring, and the trolley rolls the load along the beam. The trolleys here are manual push models, so the load moves when pushed along the beam.
How to use a push beam trolley?
Set the spacers or washers so the trolley fits the beam flange, then slide the trolley onto the open end of the beam and fasten the nuts and pins. Hang the hoist from the hook or lifting ring, then push the trolley along the beam to move the load. Check the anti-drop pins and the hook before each lift.
How does a beam trolley work?
Wheels on each side of the trolley ride on the beam flange, and the hoist hangs below from a hook or lifting ring. Pushing the trolley rolls the wheels along the flange, so the suspended load travels with it. Spacers or washers set the wheel spacing to the flange width.
How does a push beam trolley work?
A push beam trolley moves when pushed along the beam, with its wheels rolling on the flange and the hoist hanging below. The 5 trolleys here are manual push models, and the listings state no powered drive. Push models suit beam runs where the load is moved by hand.
Related: lifting and pressing hub, best lever chain hoist, best 2-ton engine hoist, best electric hoist trolley, best hydraulic press, best shop press, best folding hand truck dolly, and best lifting beam.
Scoring, line by line
Each trolley is scored on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. No trolley here states a safety listing or a warranty term, so every trolley here scores zero on those criteria; the ranking comes from performance, build and value.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| BEAMNOVA 3-Ton Trolley | 9.5 | 32 | 22 | 21 | 0 | 0 |
| KARRYTON 3-Ton Trolley | 9.5 | 30 | 21 | 21 | 0 | 0 |
| VEVOR 2-Ton Trolley | 9.4 | 28 | 20 | 21 | 0 | 0 |
| BEAMNOVA 1-Ton 6-Wheel | 9.4 | 27 | 20 | 20 | 0 | 0 |
| Maxsa 1-Ton Trolley | 9.4 | 26 | 20 | 20 | 0 | 0 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number.




