Best Lifting Beam (2026): 5 Picks Compared
Beam clamps and push trolleys for overhead lifting in the shop, compared on rated capacity, flange fit, steel, weight and stated warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallFITHOIST Beam Clamp 3 Ton9.7/10View on Amazon - 2
Best TrolleyBEAMNOVA Beam Trolley 3 Ton9.7/10View on Amazon - 3
Highest CapacityNisorpa Beam Clamp 5 Ton9.7/10View on Amazon - 4
For Narrow FlangesKARRYTON Beam Trolley 1 Ton9.5/10View on Amazon
Heavy stock on the floor does no good when the job calls for it up on the bench or over the frame, and dragging steel by hand wastes the day and risks a dropped load. A beam clamp or push trolley on a sound overhead beam gives a shop a steady lift point for a hoist, which is why this guide compares the best lifting beam hardware for clamps and trolleys that hang from the flange.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall FITHOIST Beam Clamp 3 Ton: Rated at 3 tons and 6600 lbs with the widest flange fit here, 3.1 to 12.6 inches, plus the only stated warranty, 1 year manufacturer. Check price on Amazon
- Best Trolley BEAMNOVA Beam Trolley 3 Ton: A push trolley rated at 3 tons and 6614 lbs for flange widths from 3.66 to 8.46 inches, in manganese steel with dual side wheels. Check price on Amazon
- Highest Capacity Nisorpa Beam Clamp 5 Ton: Rated at 5 tons and 11000 lbs for opening widths from 3.14 to 12.59 inches, the highest stated capacity in this guide. Check price on Amazon
- For Narrow Flanges KARRYTON Beam Trolley 1 Ton: A push trolley rated at 1 ton and 2200 lbs for flange widths from 2.5 to 8 inches, for straight and curved beam tracks. Check price on Amazon
The machines

FITHOIST Beam Clamp 6600lbs
A beam clamp rated at 3 tons with the widest flange fit here and the only stated warranty term in this guide.
Pros
- Rated at 3 tons and 6600 lbs for overhead hoist work
- Fits flange widths from 3.1 to 12.6 inches, widest here
- T-handle for fast setup and teardown on the beam
- 1 year manufacturer warranty stated by the maker
Cons
- Fixed clamp, the load does not travel along the beam
- 18.85 lb to handle into place overhead
- Capacity sits below the 5 ton clamp in this guide
- Manual T-handle adjustment only

BEAMNOVA 3 Ton Manual I Beam Trolley
A manual push trolley rated at 3 tons in manganese steel, made to roll a hoist load along straight beams in the shop.
Pros
- Rated at 3 tons and 6614 lbs for hoist loads
- Manganese steel body with dual side wheels
- Fits I-beam and H-beam flanges from 3.66 to 8.46 inches
- Hex nuts, collision bumpers and anti-drop wire pins stated
Cons
- Flange fit starts at 3.66 inches, misses narrower beams
- Manual push travel, the load moves by hand
- Needs a separate hoist to lift the load
- No warranty term is stated

Nisorpa 11000lbs/5 Ton Heavy Duty Vertical Beam
A beam clamp rated at 5 tons, the highest stated capacity here, for shops that lift heavy stock and equipment.
Pros
- Rated at 5 tons and 11000 lbs, highest here
- Opening range from 3.14 to 12.59 inches
- Carbon steel body for impact and oxidation resistance
- T-handle turns to attach or detach the clamp
Cons
- 24.25 lb, the heaviest pick here to handle overhead
- Fixed clamp, the load does not travel along the beam
- Large body needs clearance around the beam
- No warranty term is stated

KARRYTON Beam Clamp 4400LB/2Ton
A beam clamp rated at 2 tons for garage and shop beams, with gloves and a manual stated in the box.
Pros
- Rated at 2 tons and 4400 lbs for shop lifting
- Jaw opening from 3 to 9 inches for common beams
- Carbon steel with baked enamel finish
- Nitrile palm coated gloves and manual stated
Cons
- 2 ton rating sits below the heavier clamps here
- Jaw range ends at 9 inches, narrower than wider clamps
- Fixed clamp, the load does not travel along the beam
- Manual screw rod adjustment only

KARRYTON 1Ton/2200LB Beam Trolley 2.5
A manual push trolley rated at 1 ton for narrower flanges and for straight or curved beam tracks.
Pros
- Rated at 1 ton and 2200 lbs for light hoist work
- Fits flange widths from 2.5 to 8 inches
- Dual wheels stated for straight and curved tracks
- Anti-drop design, lock-nuts and gloves stated
Cons
- 1 ton rating is the lowest in this guide
- Flange fit ends at 8 inches, misses wider beams
- Manual push travel with a separate hoist needed
- 17.9 lb to handle into place overhead
Spec sheet comparison
| Model | Gear Score | Type | Load rating | Flange fit | Material | Item weight | Warranty |
|---|---|---|---|---|---|---|---|
| FITHOIST Beam Clamp 3 Ton | 9.7/10 | Beam clamp | 3 tons, 6600 lbs | 3.1 to 12.6 in | High-grade steel | 18.85 lb | 1 year manufacturer |
| BEAMNOVA Beam Trolley 3 Ton | 9.7/10 | Push trolley | 3 tons, 6614 lbs | 3.66 to 8.46 in | Manganese steel | Not stated | Not stated |
| Nisorpa Beam Clamp 5 Ton | 9.7/10 | Beam clamp | 5 tons, 11000 lbs | 3.14 to 12.59 in | Carbon steel | 24.25 lb | Not stated |
| KARRYTON Beam Clamp 2 Ton | 9.6/10 | Beam clamp | 2 tons, 4400 lbs | 3 to 9 in | Carbon steel | 12 lb | Not stated |
| KARRYTON Beam Trolley 1 Ton | 9.5/10 | Push trolley | 1 ton, 2200 lbs | 2.5 to 8 in | Carbon steel | 17.9 lb | Not stated |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 22 November 2026.
Buying guide: choosing the best lifting beam hardware
Clamp or trolley
A beam clamp grips the flange and stays put, which suits a fixed lift point over a bench or bay. A push trolley rolls along the beam on wheels, which suits work where the load needs to travel. The FITHOIST Beam Clamp 3 Ton, the Nisorpa Beam Clamp 5 Ton and the KARRYTON Beam Clamp 2 Ton are clamps. The BEAMNOVA Beam Trolley 3 Ton and the KARRYTON Beam Trolley 1 Ton are trolleys. Pick by whether the lift point needs to move, then check capacity and flange fit. See the best lifting trolley guide and types of lifting clamps for more on each type.
Flange width and beam shape
Fit decides whether the hardware seats correctly. The widest stated fit here is the FITHOIST Beam Clamp 3 Ton at 3.1 to 12.6 inches, followed by the Nisorpa Beam Clamp 5 Ton at 3.14 to 12.59 inches. The BEAMNOVA Beam Trolley 3 Ton covers 3.66 to 8.46 inches for I-beams and H-beams with washers for a snug set. The KARRYTON Beam Clamp 2 Ton covers 3 to 9 inches, and the KARRYTON Beam Trolley 1 Ton covers 2.5 to 8 inches for straight and curved tracks. Measure the flange where the hardware will sit and match it to the stated range before ordering.
Rated capacity
Capacity covers the clamp or trolley alone; the beam, hoist and rigging each carry a rating too. Ratings here run from 1 ton and 2200 lbs on the KARRYTON Beam Trolley 1 Ton to 5 tons and 11000 lbs on the Nisorpa Beam Clamp 5 Ton. The FITHOIST Beam Clamp 3 Ton is rated at 3 tons and 6600 lbs, the BEAMNOVA Beam Trolley 3 Ton at 3 tons and 6614 lbs, and the KARRYTON Beam Clamp 2 Ton at 2 tons and 4400 lbs. Keep the suspended load within the lowest rating in the lift path and never exceed the stated rating.
Steel and finish
The BEAMNOVA Beam Trolley 3 Ton states manganese steel. The Nisorpa Beam Clamp 5 Ton, the KARRYTON Beam Clamp 2 Ton and the KARRYTON Beam Trolley 1 Ton state carbon steel, with baked enamel finish on the KARRYTON picks. The FITHOIST Beam Clamp 3 Ton states high-grade steel with a corrosion-resistant galvanized screw. Finish helps with rust, but threads, wheels and jaw faces still need a wipe down and a check for damage before a lift.
Setup and handling
Clamps here set with a T-handle or screw rod turned to grip the lower flange, then locked before the hoist goes on. Trolleys set with spacers or washers matched to the flange, then locked with nuts and, on the BEAMNOVA Beam Trolley 3 Ton, wire pins. Weight matters overhead: the KARRYTON Beam Clamp 2 Ton lists 12 lb, the KARRYTON Beam Trolley 1 Ton lists 17.9 lb, the FITHOIST Beam Clamp 3 Ton lists 18.85 lb and the Nisorpa Beam Clamp 5 Ton lists 24.25 lb. Pair the hardware with a hoist rated for the job, such as the picks in the manual chain hoist guide.
Use as directed. Hang only from a beam that is sound and rated for the load, quote the rated capacity exactly as listed and never exceed it, and never lift over people. Keep hands clear of pinch points and the area under the load clear, and set the load down before adjusting any clamp or trolley. See the OSHA welding overview and our Safety Disclaimer.
Before You Strike an Arc
- Measure the flange width at the lift point and match it to the stated range, with spacers or washers set as the maker describes.
- Check the beam for damage and confirm the beam and hoist ratings cover the load.
- On arrival, check jaw faces, wheels, threads, nuts, pins and the lifting ring before the hardware goes overhead.
- Set clamps fully on the lower flange and lock them, and lock trolleys with nuts and pins, before the hoist goes on.
- Keep the load path clear and the weld area clear of anything that can burn while steel hangs overhead.
FAQ for welders
What is the difference between a beam clamp and a beam trolley?
A beam clamp grips the flange and holds a fixed lift point. A beam trolley hangs on wheels and rolls along the beam, so the lift point travels. Clamps here include the FITHOIST Beam Clamp 3 Ton. Trolleys here include the BEAMNOVA Beam Trolley 3 Ton.
How do I check flange fit before ordering?
Measure the flange width where the hardware will sit and compare it with the stated range, such as 3.1 to 12.6 inches on the FITHOIST Beam Clamp 3 Ton or 2.5 to 8 inches on the KARRYTON Beam Trolley 1 Ton. Check for taper or plates at that spot.
Does a higher clamp rating let me lift more from my beam?
No. The clamp rating covers the clamp alone, and the beam, hoist and rigging each limit the lift. Keep the load within every stated rating, whether the pick is rated at 2200 lbs or 11000 lbs.
Can these picks work with a chain hoist?
Yes, within ratings. The KARRYTON Beam Trolley 1 Ton states use with chain blocks and hoists. Match the hoist rating to the clamp or trolley rating and to the beam, and hang the hoist from the stated lifting point.
Which pick suits a narrow flange?
The KARRYTON Beam Trolley 1 Ton states the narrowest starting fit here, from 2.5 to 8 inches, rated at 1 ton and 2200 lbs for light lifts. Wider beams call for a wider stated range, such as the FITHOIST Beam Clamp 3 Ton.
Related: best lifting trolley, types of lifting clamps, manual chain hoist, and the lifting and pressing hub. Also see our best lever chain hoist.
Scoring, line by line
Each pick is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. Beam clamps and trolleys here state no electrical safety listing, so every pick scores zero on that criterion; the ranking comes from the other criteria and matches the order in the tables.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| FITHOIST Beam Clamp 3 Ton | 9.7 | 30 | 21 | 21 | n/a | 2 |
| BEAMNOVA Beam Trolley 3 Ton | 9.7 | 32 | 22 | 21 | n/a | 0 |
| Nisorpa Beam Clamp 5 Ton | 9.7 | 32 | 21 | 21 | n/a | 0 |
| KARRYTON Beam Clamp 2 Ton | 9.6 | 28 | 20 | 20 | n/a | 0 |
| KARRYTON Beam Trolley 1 Ton | 9.5 | 27 | 20 | 20 | n/a | 0 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.




