Best Lifting Chains (2026): 4 Picks for Engine Hoists and Shop Cranes
Four G80 lifting chains for engine hoists and shop cranes, compared on rated capacity, chain size, length, adjusters and hooks.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallVEVOR 18,400 lb 10 ft9.5/10View on Amazon - 2
Most Flexible RiggingWowDIY 7,000 lb 10 ft9.5/10View on Amazon - 3
Best Two-Leg ValueBEAMNOVA 7,000 lb 10 ft9.4/10View on Amazon - 4
Compact PickVEVOR 6,600 lb 6 ft9.4/10View on Amazon
An engine hanging over an open bay leaves no room for guessing. The chain has to hold the load, the hooks have to stay shut, and the length has to let the load sit level while it moves. That is the job the best lifting chains do, and this guide compares the slings on what each listing states: rated capacity, chain size, length, adjusters and hooks.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall VEVOR 18,400 lb 10 ft: The highest rated capacity here at 18,400 lb, on 10 ft of 3/8 inch G80 chain with four adjusters. Check price on Amazon
- Most Flexible Rigging WowDIY 7,000 lb 10 ft: A master control link covers single-leg, double-leg and basketed lifts at 7,000 lb double. Check price on Amazon
- Best Two-Leg Value BEAMNOVA 7,000 lb 10 ft: 7,000 lb total with 3,500 lb on each chain, 6,100 lb at 60 degrees, and grab hooks with buckles. Check price on Amazon
- Compact Pick VEVOR 6,600 lb 6 ft: 6,600 lb in a 6 ft sling at 16.53 lb, with two adjusters for uneven loads. Check price on Amazon
The machines

VEVOR Chain Sling 18400 lbs 10 ft 3/8-inch G80
The highest rated capacity here at 18,400 lb, on a 10 ft sling of 3/8 inch G80 Mn-steel chain with four adjusters.
Pros
- Highest rated capacity here at 18,400 lb
- Thickest chain here at 3/8 inch G80 Mn-steel
- Four adjusters for uneven or irregular loads
- 10 ft length suits engine pulls and long reaches
Cons
- Heaviest chain here at 77.16 lb, awkward to carry and rig alone
- No warranty term is stated
- Only the 10 ft length is offered
- Four adjusters add setup time on simple straight lifts

Lifting Chains with Adjuster Hooks
A 7,000 lb double-leg sling on 5/16 inch Grade 80 chain, 10 ft long, with a master control link for single-leg, double-leg and basketed lifts.
Pros
- Master control link allows single-leg, double-leg and basketed lifts
- 7,000 lb double-leg capacity at 90 degrees, 6,100 lb at 60 degrees
- Grab hooks with buckles at both ends, red for easy identification
- Heat-treated Grade 80 alloy chain
Cons
- Single-leg capacity drops to 3,500 lb
- Capacity falls to 6,100 lb at 60 degrees, so angle matters
- Both legs share a single master link, so both legs must suit the same lift
- No warranty term is stated

BEAMNOVA Lifting Chains with Adjuster, Slip Hooks
A two-leg 7,000 lb sling on 5/16 inch Grade 80 chain, 10 ft long, with an adjuster at the base of the lifting ring.
Pros
- 7,000 lb total capacity with 3,500 lb on each chain
- Adjuster at the base of the lifting ring shortens either leg
- Grab hooks with buckles at both ends
- Anti-corrosion treated surface on heat-treated alloy chain
Cons
- Capacity falls to 6,100 lb at 60 degrees
- Fixed two-leg layout, less flexible than the master-link sling
- 5/16 inch chain is thinner than the 3/8 inch chain on the top pick
- Only the 10 ft length is offered

VEVOR Chain Sling, 5/16 in x 6ft G80 Lifting
A compact 6 ft sling rated at 6,600 lb on 5/16 inch G80 Mn-steel chain, with two adjusters and the lowest stated item weight here at 16.53 lb.
Pros
- 6,600 lb capacity in a compact 6 ft sling
- Lowest stated item weight here at 16.53 lb
- Two adjusters for uneven loads
- G80 Mn-steel chain with alloy steel hooks
Cons
- Lowest rated capacity here at 6,600 lb
- 6 ft length gives the least reach here
- Two adjusters only, fewer than the four on the top pick
- Only the 6 ft length is offered, so longer reaches need a different sling
Spec sheet comparison
| Model | Gear Score | Rated capacity | Chain size | Length | Adjustment | Hooks | Item weight |
|---|---|---|---|---|---|---|---|
| VEVOR 18,400 lb 10 ft | 9.5/10 | 18,400 lb | 3/8 in | 10 ft | Four adjusters | Alloy steel hook | 77.16 lb |
| WowDIY 7,000 lb 10 ft | 9.5/10 | 7,000 lb | 5/16 in | 10 ft | Master control link | Grab hooks with buckles | Not stated |
| BEAMNOVA 7,000 lb 10 ft | 9.4/10 | 7,000 lb | 5/16 in | 10 ft | Adjuster at lifting ring | Grab hooks with buckles | Not stated |
| VEVOR 6,600 lb 6 ft | 9.4/10 | 6,600 lb | 5/16 in | 6 ft | Two adjusters | Grab hooks | 16.53 lb |
All specs here repeat what the maker rates and the listing prints, copied down 22 November 2026.
Buying guide: the best lifting chains
Rated capacity
Capacity is the number to check, and it is always tied to how the sling is rigged. The chains here state rated capacities from 6,600 lb to 18,400 lb. The 7,000 lb slings state that figure for a double-leg lift at 90 degrees, with 3,500 lb on a single leg and 6,100 lb at 60 degrees, so the angle of the legs changes what the sling can hold. Match the rated capacity to the load with the legs at the angle you will actually use, and never lift more than the listing states for that setup.
Chain size and length
The chains here use 5/16 inch chain, apart from the top pick, which uses 3/8 inch chain, all in Grade 80 steel. Thicker chain carries more, and the 3/8 inch chain pairs with the highest rated capacity here. Length runs from 6 ft to 10 ft across the slings. A longer chain reaches across a wider load and gives more room to adjust, while a shorter chain stays out of the way on a compact lift. Pick the length that fits the load and the headroom you have.
Adjusters and hooks
Adjusters let you shorten a leg to level an uneven load. The top pick has four adjusters, the compact VEVOR sling has two adjusters, and the BEAMNOVA sling has an adjuster at the base of the lifting ring. The WowDIY sling takes a different approach, with a master control link that allows single-leg, double-leg and basketed lifts without changing slings. Hooks matter just as much: the VEVOR slings use alloy steel hooks, while the BEAMNOVA and WowDIY slings use grab hooks with buckles at both ends, in red for easy identification. Check that the hooks close fully and that the load hangs in the center of the hook, and never hang a load on the edge of a hook.
Legs and angles
A sling rated for a double-leg lift does not carry the same load on a single leg. The WowDIY and BEAMNOVA slings state 3,500 lb on a single leg and 7,000 lb on a double-leg lift at 90 degrees, dropping to 6,100 lb at 60 degrees. Wider angles put more strain on each leg, so keep the legs as close to vertical as the load allows and never guess at the angle. If the lift needs more than the single-leg rating, rig both legs and check the angle before the load leaves the ground.
Use as directed. Never exceed the rated capacity the maker states for the way the sling is rigged, and never lift a load over people. Hang the load in the center of the hook, never on the edge, and do not twist, invert or twine the chain. Inspect the chain, hooks and adjusters before each lift, and take a worn or damaged sling out of service. See the Safety Disclaimer.
Before You Strike an Arc
- Match the rated capacity to the load and the rigging angle before the lift.
- Hang the load in the center of the hook, never on the edge.
- Check the adjusters, hooks and chain links on arrival and before each lift.
- Keep the chain free of twists and keep the load clear of people.
- Keep the work area clear under the load, and lower the load before adjusting the rigging.
FAQ for welders
What size lifting chain do I need for an engine?
Match the chain to the weight of the engine and the way you will rig it. A 6,600 lb sling covers a lighter pull, while the 18,400 lb sling covers heavier loads such as trucks and tractor tires. Check the rated capacity for the leg setup and angle you will use, and never lift more than the listing states for that setup.
What does G80 mean on a lifting chain?
G80 is the grade of the chain steel, and every sling here uses G80 or Grade 80 chain. Grade 80 chains offer a higher safe working load than lower grade chains at the same weight, as the BEAMNOVA and WowDIY listings state. The grade alone does not set the capacity: chain size, length and leg setup decide what each sling is rated to lift.
Can I use a lifting chain on a single leg?
It depends on the sling. The WowDIY sling uses a master control link that allows single-leg, double-leg and basketed lifts, and it states 3,500 lb on a single leg at 90 degrees. The BEAMNOVA sling states the same single-leg figure for its two legs. Check the single-leg rating before any single-leg lift, and never assume a double-leg rating applies to a single leg.
Why does the capacity drop at 60 degrees?
At a wider angle each leg carries more of the load, so the rated capacity falls. Both 7,000 lb slings state 6,100 lb at 60 degrees, down from 7,000 lb on a double-leg lift at 90 degrees. Rig the legs as close to vertical as the load allows, and use the rating for the angle you actually have.
How do I adjust the length of a lifting chain?
Use the adjusters on the sling to shorten a leg until the load sits level. The top pick has four adjusters, the compact VEVOR sling has two adjusters, and the BEAMNOVA sling has an adjuster at the base of the lifting ring. The WowDIY sling uses its master control link instead, which also lets you change between single-leg, double-leg and basketed lifts.
Related: best 2 ton engine hoist, chain vs nylon lifting slings, best lifting slings, manual chain hoist, and the lifting and pressing hub. Also see our best shop crane hoist. Also see our best lever chain hoist.
Scoring, line by line
Each chain is scored on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. No listing here states a safety certification, so every chain here scores zero on that criterion, and no listing states a warranty term, so every chain scores zero on warranty too. The ranking comes from performance, build and value, led by rated capacity and chain size.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| VEVOR 18,400 lb 10 ft | 9.5 | 32 | 22 | 21 | 0 | 0 |
| WowDIY 7,000 lb 10 ft | 9.5 | 29 | 21 | 21 | 0 | 0 |
| BEAMNOVA 7,000 lb 10 ft | 9.4 | 28 | 21 | 20 | 0 | 0 |
| VEVOR 6,600 lb 6 ft | 9.4 | 26 | 20 | 20 | 0 | 0 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number.




