5183 vs 5356 Aluminum Mig Wire: Which One Should You Buy?
Three ER5356 spools for aluminum MIG welding: the 5% magnesium alloy for 5000-series base metals, compared on stated diameter, packaging, shielding gas and listed detail.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
YESWELDER Silicon Aluminum Welding Wire9.7/10View on Amazon - 2
YESWELDER Silicon Aluminum Welding Wire9.6/10View on Amazon - 3
ER40439.6/10View on Amazon - 4
WeldingCity 5 Rolls of ER5356 Aluminum MIG Welding Wire 1-LbView on Amazon - 5
ARCCAPTAIN Magnesium Aluminum MIG Welding Wire ER5356 .035"View on Amazon - 6
TOOLIOM ER4043 .035" Aluminum MIG Welding WireView on Amazon - 7
TOOLIOM ER4043 .030" Aluminum MIG Welding WireView on Amazon - 8
Aluminum 4043 MIG Welding Wire .035" Wire 5 Ib .035"View on Amazon - 9
Aluminum 4043 MIG Welding Wire .047"View on Amazon
5183 vs 5356 aluminum mig wire: here is the straight answer from the listings. All three wires below are ER5356, the 5% magnesium aluminum (AlMg5) general-purpose alloy for 5000-series aluminum, with the stated salt-water corrosion resistance, higher shear strength and a clean white color after anodizing. No 5183 wire is among these listings, so this guide cannot tell you what 5183 offers from these listings; it tells you exactly what 5356 is, from three spools, and how to pick among them.
Other welders and gear to compare
WeldingCity 5 Rolls of ER5356 Aluminum MIG Welding Wire 1-LbCheck price on Amazon
ARCCAPTAIN Magnesium Aluminum MIG Welding Wire ER5356 .035"Check price on Amazon
TOOLIOM ER4043 .035" Aluminum MIG Welding WireCheck price on Amazon
TOOLIOM ER4043 .030" Aluminum MIG Welding WireCheck price on Amazon
Aluminum 4043 MIG Welding Wire .035" Wire 5 Ib .035"Check price on Amazon
Aluminum 4043 MIG Welding Wire .047"Check price on Amazon
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
5183 vs 5356 aluminum mig wire: what the listings state
The keyword asks for a 5183 vs 5356 comparison, so here is what the listings actually cover. ER5356, per the three listings, is a 5% magnesium aluminum filler metal for the MIG process. The YESWELDER and WeldingCity listings name 5050, 5052, 5083, 5356, 5454 and 5456. The ARCCAPTAIN bullets name 5052, 5083, 5356, 5454 and 5456, while its title names 5052, 5083, 5086 and 6061. So the full 5050-to-5456 list is named only by the YESWELDER and WeldingCity listings: the ARCCAPTAIN listing does not name 5050, and it alone names 5086 and 6061 in its title. The listings claim better corrosion resistance in salt water and higher shear strength from the magnesium addition, plus a welded seam that stays a clean white color after anodizing for a good color match with the base metal. On 5183, the listings state nothing at all: no 5183 spool, no 5183 chemistry, no 5183 comparison. If your job calls for 5183 specifically, these three listings are not the wire.
Side by side
| YESWELDER ER5356 | WeldingCity ER5356 5-pack | ARCCAPTAIN ER5356 | |
|---|---|---|---|
| Alloy | ER5356, 5% magnesium (AlMg5) | ER5356, 5% magnesium (AlMg5), AWS A5.10 | ER5356, 5.0% magnesium |
| Stated diameter | 0.030 in | 0.035 in (more sizes available) | 0.035 in (spec table says 0.04) |
| Spool weight | 1 lb | Five 1-lb spools | 1 lb |
| Named base metals | 5050, 5052, 5083, 5356, 5454, 5456 | 5050, 5052, 5083, 5356, 5454, 5456 | 5052, 5083, 5086, 6061 (title); 5052, 5083, 5356, 5454, 5456 (bullets) |
| Corrosion claim | Salt water | Salt water | Seawater and salt spray |
| Anodized color | Clean white | Not stated | White |
| Shielding gas stated | Not stated | Argon, helium or mix | Not stated |
| Warranty | Not stated | Not stated | Not stated |
These numbers are the manufacturer’s ratings exactly as each listing gives them. None of the three listings states a warranty term.
The gear: three ER5356 spools, ranked
Ranked by what each listing states: alloy detail, stated diameters, packaging and extras.
1. WeldingCity 5-pack, ER5356 0.035 in
The most complete listing here. It is a 5-pack of 1-lb spools (5 lb total stated item weight), 0.035 in (0.9 mm), and it names 0.030 in and one more size among the available diameters. It states the AWS A5.10 and ASME SFA A5.10 classification for ER5356, prints the typical chemistry (5.0% magnesium, with the silicon, iron, copper, manganese, chromium, zinc and titanium figures), and is the only listing to name shielding gas: argon, helium or a mix. The spools are 4 in, wrapped in moisture-resistant plastic film. First listed May 20, 2014, the oldest listing of the three.
2. ARCCAPTAIN ER5356 0.035 in
A single 1-lb spool stating 5.0% magnesium, seawater and salt spray corrosion resistance, and a stable arc with good bead appearance. It states a melting point range of 950 F to 1175 F and a density of 0.097 lb per cubic inch, details the other two listings skip. One contradiction to flag: the title and bullets state 0.035 in while the spec table states 0.04 in for item, wire and thickness. Per the rule, the title and bullets win, so treat this as a 0.035 in wire and confirm with the listing before ordering.
3. YESWELDER ER5356 0.030 in
A single 1-lb spool of ER5356 at 0.030 in, the thinnest stated diameter here. The listing states 5% magnesium aluminum (AlMg5) for MIG, all-position use (vertical, flat, up and corner), and a strong ABS spool stated as highly durable, tough and anti-fragile, built to withstand transportation and run in the welding machine. It claims the anodized seam stays a clean white for color match. Thinner on stated detail than the other two, which is why it ranks third. First listed June 14, 2020.
Diameter: what the listings state
The YESWELDER states 0.030 in. The WeldingCity states 0.035 in for this 5-pack and names 0.030 in and one more size as available diameters. The ARCCAPTAIN states 0.035 in in its title and bullets. Match the diameter to what your drive rolls and contact tips are set up for; the listings do not state which diameter suits which material thickness, so check your machine’s door chart or manual.
Shielding gas the listings state
Only the WeldingCity listing names shielding gas: argon, helium or a mix. The YESWELDER and ARCCAPTAIN listings state no shielding gas at all, so no shielding-gas statement can be taken from those two listings.
FAQ for welders
What does ER5356 mean?
Per the listings, ER5356 is a 5% magnesium aluminum (AlMg5) filler metal for the MIG welding process. The WeldingCity listing states the AWS A5.10 and ASME SFA A5.10 classification. All three listings here are ER5356.
Which base metals do the listings name for 5356?
The YESWELDER and WeldingCity listings name 5050, 5052, 5083, 5356, 5454 and 5456. The ARCCAPTAIN bullets name 5052, 5083, 5356, 5454 and 5456, and its title names 5052, 5083, 5086 and 6061. The 5000-series names are aluminum-magnesium alloys, the family the listings say ER5356 is made for.
What is the difference between 5183 and 5356?
These listings do not say: no 5183 wire is among them. What they do state is the 5356 side, 5% magnesium aluminum for 5000-series base metals with stated salt-water corrosion resistance, higher shear strength and a white anodized color. Do not read 5183 properties into these listings.
Do any of these state a warranty?
No. None of the three listings states a warranty term. What they do state is packaging and spares: the WeldingCity 5-pack ships five 1-lb spools in moisture-resistant film, the YESWELDER ships on a stated strong ABS spool, and the ARCCAPTAIN ships a single spool.
What wire diameters are stated?
The YESWELDER states 0.030 in. The WeldingCity 5-pack states 0.035 in and names 0.030 in and one more size as available. The ARCCAPTAIN states 0.035 in in its title and bullets, though its spec table says 0.04 in; the title and bullets win.
Can I use these for TIG welding?
The listings state the MIG process for all three, and TIG is not stated for any of them. These three are MIG wires only, per their listings.
Related: our picks for the best aluminum MIG wire under 40 and the best aluminum MIG wire for beginners, the best MIG wire for home garage and stainless vs mild steel MIG wire.




