4043 vs 4047 Aluminum Welding Rod: Which One Should You Buy?
4043 vs 4047 aluminum welding rod explained: 4043 silicon content and fluidity, plus four 4043 stick and TIG listings ranked.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
ARCCAPTAIN ER4043 Aluminum TIG Welding Rod9.7/10View on Amazon - 2
YESWELDER Aluminum TIG Welding Rod ER4043 1/16"x16" 5LB 5%9.7/10View on Amazon - 3
5-Lb ER4043 TIG Welding Rod Aluminum 4043 3/32"9.6/10View on Amazon - 4
Aluminum E4043 Stick Electrode Rod 3/32'' x 14''View on Amazon - 5
WeldingCity 2-Lb ER4043 TIG Welding Rod Aluminum 4043 3/32"View on Amazon - 6
5-Lb ER4043 TIG Welding Rod Aluminum 4043 1/16"View on Amazon - 7
5-Lb ER4043 TIG Welding Rod Aluminum 4043 1/8"View on Amazon - 8
2-Lb ER4043 TIG Welding Rod Aluminum 4043 1/8"View on Amazon - 9
HARRIS 0404350 4043 Aluminum TIG Welding RodView on Amazon
4043 vs 4047 aluminum welding rod comes down to silicon. 4043 is the general-purpose aluminum-silicon filler: the WeldingCity listing states 4.5 to 6.0% silicon, which gives good fluidity and a weld less sensitive to cracking on various grades of aluminum. No 4047 listing was included in this guide, so no 4047 figure is stated here. For most home and farm aluminum repair and fabrication, 4043 is the pick the listings here support.
Other welders and gear to compare
Aluminum E4043 Stick Electrode Rod 3/32'' x 14''Check price on Amazon
WeldingCity 2-Lb ER4043 TIG Welding Rod Aluminum 4043 3/32"Check price on Amazon
5-Lb ER4043 TIG Welding Rod Aluminum 4043 1/16"Check price on Amazon
5-Lb ER4043 TIG Welding Rod Aluminum 4043 1/8"Check price on Amazon
2-Lb ER4043 TIG Welding Rod Aluminum 4043 1/8"Check price on Amazon
HARRIS 0404350 4043 Aluminum TIG Welding RodCheck price on Amazon
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
4043 vs 4047 aluminum welding rod: the difference in one paragraph
4043 is the aluminum-silicon filler the listings here stock, in stick and TIG forms, with the silicon content stated at 4.5 to 6.0% in the WeldingCity listing. No 4047 listing was included in this guide, so this guide states no 4047 silicon figure or use case. Every figure below comes from the 4043 listings.
Side by side
| 4043 | 4047 | Notes | |
|---|---|---|---|
| Silicon | 4.5 to 6.0% per the WeldingCity listing | No 4047 listing in this guide | Silicon drives fluidity |
| Best for | General aluminum repair and fabrication | No 4047 listing in this guide | Match the alloy to the joint |
| Forms in this guide | Stick electrodes and TIG rods | No 4047 listing in this guide | All four listings are 4043 |
| Shielding | TIG needs gas; stick coating shields the arc | No 4047 listing in this guide to check | Shielding follows the form, not the alloy |
Alloy These numbers are the manufacturer’s ratings exactly as each listing gives them. No 4047 listing was included here, so the 4047 column states no figures.
When 4043 is the better choice
General aluminum repair and fabrication. The SÜA listing states its E4043 stick electrode for all weldable grades of aluminum sheets, plates, pipes, castings and extrusions, from irrigation piping to boat parts to automotive pieces. The WeldingCity listing calls ER4043 a general-purpose, all-position aluminum welding rod for various grades of aluminum. If the job is a cracked bracket, a patched tank or a built-up casting, 4043 is the filler the listings are built around.
Stick or TIG, your pick of process. The SÜA E4043 comes as a 3/32 in by 14 in stick electrode in a 1 lb pack, also usable as an oxyacetylene brazing rod, while the WeldingCity and Harris listings are 3/32 in by 36 in TIG rods. The Hobart 4043 is a 1/8 in by 14 in stick electrode for DC electrode-positive only. Match the form to the machine you own: stick for the buzz box, TIG rod for the TIG torch.
When 4047 is the better choice
Thin sections and tight joints. No 4047 listing was included in this guide, so this guide states no 4047 figure for thin sections or tight joints. The 4043 listings below cover general aluminum repair and fabrication, in stick and TIG forms.
Sealing work. No 4047 listing was included in this guide, so this guide states no 4047 figure for sealing work. The SÜA listing states its E4043 electrode for tanks, among irrigation piping, refrigeration equipment, boat parts and other uses, and the 4043 listings below cover the home shop work.
The gear: four 4043 listings, ranked
All four listings in this guide are 4043, in stick and TIG forms, ranked from the most complete listing to the thinnest one. Where the title or bullets disagree with the spec table, the title and bullets win, and the contradictions are called out.
- WeldingCity ER4043 TIG rod, 3/32 in by 36 in, 2 lb pack: the most complete listing. AWS A5.10 specification, 4.5 to 6.0% silicon, diameters 1/16 in, 3/32 in and 1/8 in, packs of 2, 5 and 10 lb. Shielding gas required, usually 100% argon, helium or a mix. The pick for TIG work with a paper trail.
- SÜA E4043 stick electrode, 3/32 in by 14 in, 1 lb: for stick or brazing. Usable as a SMAW stick electrode or an oxyacetylene brazing rod, for aluminum down to 3/32 in thickness, with sizes 3/32 in, 1/8 in and 5/32 in and packs of 0.5, 1 and 2 lb. The pick for stick welders and torch brazing.
- Harris 4043 TIG rod, 3/32 in by 36 in, 10 lb box: the bulk buy. AWS A5.10 R4043 in a 10 lb box for shops that burn through rod. One wrinkle: the spec table lists a 1 pound item weight against the 10 lb box in the title; go by the title. The pick for high-volume TIG work.
- Hobart 4043 stick electrode, 1/8 in by 14 in: the simple stick pick. For flat, horizontal and vertical welds, DC electrode-positive only, at 4.2 ounces. One wrinkle: the spec table lists the size as 3/32 in against the 1/8 in in the title; go by the title. The pick for a basic 4043 stick electrode.
For aluminum MIG work rather than stick or TIG, see the best aluminum MIG wire guide, and for torch work the best brazing rods for aluminum.
FAQ for welders
Can I use 4043 for both TIG and stick?
Use the form the listing states. The SÜA and Hobart listings are stick electrodes, and the SÜA also lists oxyacetylene brazing; the WeldingCity and Harris listings are TIG rods. The alloy is the same family, but the form has to match the process.
What gas does 4043 TIG rod need?
The WeldingCity listing states shielding gas is required, usually 100% argon, helium or a mix. Stick electrodes like the SÜA carry their shielding in the coating instead.
What polarity do 4043 stick electrodes use?
The Hobart listing states DC electrode-positive only. The SÜA listing does not state a polarity, so check the package before striking an arc.
Can 4043 be used for brazing?
The SÜA listing states its E4043 can be used as a SMAW stick electrode or as an oxyacetylene brazing rod. The other three listings do not list brazing as a use.
What thickness can 4043 weld?
The SÜA listing states a minimum of 3/32 in thickness for its electrode. Thinner material wants a smaller diameter and a gentler hand, whatever the alloy.
Is 4047 stronger than 4043?
No 4047 listing was included in this guide, so no 4047 strength figure is stated here. The WeldingCity listing states 4.5 to 6.0% silicon for its ER4043 and calls it a general-purpose, all-position aluminum welding rod. Pick by the listing, not by a strength ranking.
Related: the best aluminum MIG wire, the best brazing rods for aluminum and the welding consumables hub.




