308 vs 316 Stainless Welding Rod: Which One Should You Buy?
308 vs 316 stainless welding rod answered: match the filler to the base metal, with four 308 listings ranked, two TIG and two stick.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Convivium ER308L Stainless Steel TIG Welding Rods9.6/10View on Amazon - 2
YESWELDER Stainless Steel TIG Welding Rod ER308L 1/16"x16" 5LB9.6/10View on Amazon - 3
Verdanzia 30 Pcs Stainless Steel Tig Welding Rod ER308L9.6/10View on Amazon - 4
WeldingCity 5-Lb ER308L Stainless Steel 308 TIG Welding RodView on Amazon - 5
YESWELDER Stainless Steel TIG Welding Rod ER308L 1/8"x16" 5LBView on Amazon - 6
SÜAView on Amazon - 7
E308L-16View on Amazon - 8
ARCCAPTAIN Stainless Steel TIG Welding Rod ER308LView on Amazon
You are holding stainless to weld and the rod choice is 308 or 316: pick wrong and the weld will not match the base metal. 308 vs 316 stainless welding rod comes down to what you are welding: 308L filler is the general-purpose rod for 304 and similar stainless, while 316L filler exists for 316 base metal. All four listings here are 308-side rods, two TIG and two stick, so this guide covers the 308 side in detail and tells you when to shop for 316 instead.
Other welders and gear to compare
WeldingCity 5-Lb ER308L Stainless Steel 308 TIG Welding RodCheck price on Amazon
YESWELDER Stainless Steel TIG Welding Rod ER308L 1/16"x16"Check price on Amazon
YESWELDER Stainless Steel TIG Welding Rod ER308L 1/8"x16" 5LBCheck price on Amazon
SÜACheck price on Amazon
E308L-16Check price on Amazon
ARCCAPTAIN Stainless Steel TIG Welding Rod ER308LCheck price on Amazon
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
308 vs 316 stainless welding rod: the difference
Match the filler to the base metal. The two TIG listings here state they are filler for 304, 304L, 308, 308L, 321 and 347 stainless, while the two stick listings name 304L, 321 and 347. No 316 listing was among these four, so the 316 side is described as a use case: welders reach for 316L filler when the base metal is 316, where the service calls for the higher alloy. If your base metal is 304, the listings below are your rods; if it is 316, keep shopping.
Side by side
| WeldingCity ER308L TIG | YESWELDER ER308L TIG | SÜA E308L-16, 4.4 lb | SÜA E308L-16, 2 lb | |
|---|---|---|---|---|
| Type | TIG rod | TIG rod | Stick electrode | Stick electrode |
| Spec | AWS A5.9 ER308L | ER308L | E308L-16 | E308L-16 |
| Diameter | 0.045, 1/16, 3/32, 1/8 in | 1/16 in | 3/32 and 1/8 in | 3/32 and 1/8 in |
| Length | 36 in | 16 in | 12 in (3/32) | 12 in (3/32) |
| Pack | 1, 5, 10 lb | 5 lb | 0.5, 2, 4.4 lb | 2 lb |
| Shielding | 100% argon | 100% argon or argon/helium | Not stated | Not stated |
| Base metals | 304, 304L, 308, 308L, 321, 347 | 304, 304L, 308, 308L, 321, 347 | 304L, 321, 347 | 304L, 321, 347 |
Ratings in this table are the makers’ own claims taken from each product page (20 October 2026). Where a listing states a figure two ways, the table shows both.
The gear: four 308 listings, ranked
1. WeldingCity ER308L TIG rod, 3/32 in x 36 in, 5 lb
The most documented rod here: ER308L to AWS A5.9 with a stated typical composition, C=0.02, Si=0.32, Mn=1.70, Cr=20.0 and Ni=10, in diameters 0.045 in, 1/16 in, 3/32 in and 1/8 in at 36 in length. It lists 304, 304L, 308, 308L, 321 and 347 as base metals, calls for 100% argon shielding, and comes in 1, 5 and 10 lb packs.
2. YESWELDER ER308L TIG rod, 1/16 in x 16 in, 5 lb
The second TIG rod: ER308L for the same 304-family base metals, with 100% argon or argon/helium shielding and a stated 0.03 percent maximum carbon for intergranular corrosion resistance. It lists welding, petrochemical, pressure vessel, food processing and medical equipment uses. The rods are 16 in long at 5.15 lb.
3. SÜA E308L-16 stick electrode, 3/32 in x 12 in, 4.4 lb
The stick option: E308L-16 for all-position welding of 304L, 321 and 347, with 0.04 percent maximum carbon, easy strike and restrike, low spatter and self-peeling slag. It lists dairy, food, restaurant equipment and chemical tanks among uses. Available in 3/32 and 1/8 in, in 0.5, 2 and 4.4 lb packs; the 3/32 in electrodes are 12 in long.
4. SÜA E308L-16 stick electrode, 3/32 in x 12 in, 2 lb
The same electrode in a 2 lb pack: identical specs to the 4.4 lb listing, all-position E308L-16 with the same applications. Buy the small pack to try the rod, the large pack to work.
Rod length and pack size
TIG rods come long: 36 in on the WeldingCity and 16 in on the YESWELDER. Stick electrodes are shorter: 12 in for 3/32 in and 14 in for 1/8 in on the SÜA listings. Pack sizes run 0.5 lb to 10 lb across the four listings. For a single repair, the small SÜA packs make sense; for ongoing stainless work, the 5 and 10 lb TIG packs are the shop choice.
When 308 is the right rod
When the base metal is 304, 304L, 308, 321 or 347, the two TIG listings say 308L is the filler; the stick listings name 304L, 321 and 347. The WeldingCity and YESWELDER listings both name those grades, and the SÜA listings name 304L, 321 and 347 for the stick electrode. For TIG, both TIG listings call for 100% argon, with the YESWELDER adding argon/helium for penetration. For stick in all positions, the E308L-16 listings cover it with self-peeling slag.
When to look at 316 instead
None of these four listings covers 316 base metal, so this side is a use case, not a product. If your base metal is 316 stainless, a 308L rod is not the match the listings describe; look for a 316L listing that names 316 among its base metals, the way these listings name 304. Do not pick a filler by price or by what is in the drawer: match it to the base metal first.
FAQ for welders
Can I use 308 rod on 316 stainless?
Not per these listings. The two TIG listings name 304, 304L, 308, 308L, 321 and 347 as base metals, and the stick listings name 304L, 321 and 347; none of the four names 316. For 316 base metal, find a 316L listing that states 316 coverage.
What is the difference between ER308L and E308L-16?
Per the listings, ER308L is a bare TIG rod needing argon shielding gas, while E308L-16 is a coated stick electrode for all-position welding with self-peeling slag. Same 308L family, different processes.
What shielding gas do the TIG listings call for?
Both TIG listings call for 100% argon. The YESWELDER adds argon/helium for greater penetration and higher speeds. Neither lists a flow rate, so check your machine’s guidance.
What diameters do these rods come in?
The WeldingCity TIG rod lists 0.045 in, 1/16 in, 3/32 in and 1/8 in; the YESWELDER is 1/16 in; the SÜA stick electrodes come in 3/32 and 1/8 in. Match the diameter to the material thickness and the joint.
Do I need to worry about carbon content?
The listings emphasize low carbon: 0.02 percent typical on the WeldingCity, 0.03 percent maximum on the YESWELDER and 0.04 percent maximum on the SÜA, all to preserve corrosion resistance at the weld. For food, dairy or chemical service, the lower the better.
Related: our MIG vs TIG for stainless steel comparison, stainless vs mild steel MIG wire, our picks for the best MIG wire for stainless steel and the best TIG rod for thin sheet metal.




