035 vs 045 Flux Core Wire: Which One Should You Buy?
Two 0.035 in and two 0.045 in gasless flux core wires compared on AWS class, base metal, positions and packaging, with a verdict on which side to pick.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Blue Demon 308LFC-O X .045 X 10LB Spool Stainless9.7/10View on Amazon - 2
VEVOR Flux Core Welding Wire9.6/10View on Amazon - 3
WeldingCity E71T-11 Gasless Flux-Cored Mild Steel9.6/10View on Amazon - 4
Flux Core Mig Wire, Mild Steel9.6/10View on Amazon
Verdict. Pick the 0.035 in side for all-position work on carbon and mild steel: the VEVOR and Jimm E71T-GS wires both state all positions and gasless outdoor use. Pick the 0.045 in side for stainless without gas, the Blue Demon 308LFC-O with stated 70 KPSI tensile, or for AWS A5.20 conformance on mild steel, the WeldingCity E71T-11.
Flux core wire choice starts with diameter, and this 035 vs 045 flux core wire comparison puts the two sides head to head through four real listings, two on each. The 0.035 in pair are both E71T-GS wires for carbon and mild steel; the 0.045 in pair split between a stainless wire and a mild steel wire. Here is what each listing states, and where the sides actually differ.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
The four wires

Blue Demon 308LFC-O X .045 X 10LB Spool Stainless
A 0.045 in stainless flux core gasless wire, E308LFC-O to AWS A5.22, with stated 70 KPSI tensile strength and 30% minimum elongation.
Pros
- E308LFC-O stainless wire for all 300 series up to 308L and 430 series, per the listing
- AWS A5.22 class with stated 70 KPSI tensile strength and 30% min elongation
- Gasless flux core, suited to mobile and outdoor jobs per the listing
- Globular transfer method described in detail
Cons
- Flat and horizontal positions only, not all positions
- Runs optimally on DCEP, per the listing
- No warranty term is stated

VEVOR Flux Core Welding Wire
A 0.035 in E71T-GS gasless flux core wire on a 10 lb spool, with higher manganese and silicon for welding dirty or rusted carbon steel.
Pros
- E71T-GS with higher manganese and silicon for dirty, oily or rusted steel
- Low spatter and stable arc, per the listing
- All position welding, gasless for outdoor use
- Robust spool against breakage and wastage, per the listing
Cons
- No AWS conformance number beyond the E71T-GS label
- No tensile or elongation figures stated
- No warranty term is stated
- 10 lb spool only; no other sizes stated

WeldingCity E71T-11 Gasless Flux-Cored Mild Steel
A 0.045 in E71T-11 gasless flux core wire on a 10 lb spool, conforming to AWS A5.20, with vacuumed foil packaging.
Pros
- Conforms to AWS A5.20/ASME SFA5.20 E71T-11, stated
- Self-shielded; no protection gases needed
- Vacuumed aluminum foil packaging
- Lists deposited metal chemistry in full
Cons
- Welding positions not stated
- No tensile figures stated
- No warranty term is stated
- The thinnest listing of the four

Flux Core Mig Wire, Mild Steel
A 0.035 in E71T-GS gasless flux core wire on a 10 lb spool, vacuum packed, with low spatter and full slag coverage.
Pros
- E71T-GS gasless wire, .035 in (0.9 mm) on a 10 lb spool
- Vacuum packed against moisture and dust
- Low spatter, full slag coverage, easy slag removal per the listing
- All positions, single and multi-pass, good for windy outdoor work
Cons
- No AWS conformance number beyond the E71T-GS label
- No tensile figures stated
- No warranty term is stated
Other welders and gear to compare
4-Pack 0.035" Gasless Flux Core MIG WireCheck price on Amazon
PGN E71T-11 .035" Gasless Flux Core Welding Wire 2 lb LowCheck price on Amazon
HZXVOGEN Gasless Flux Core MIG Welding WireCheck price on Amazon
Flux Core Welding WireCheck price on Amazon
ATLASWELDER Flux Core Welding WireCheck price on Amazon
Forney 42303 Flux Core Mig WireCheck price on Amazon
Side by side: 035 vs 045 flux core wire
| Blue Demon 308LFC-O | VEVOR E71T-GS 0.035 | WeldingCity E71T-11 0.045 | Jimm E71T-GS 0.035 | |
|---|---|---|---|---|
| Gear Score | 61 | 59 | 58 | 57 |
| Side | 0.045 in | 0.035 in | 0.045 in | 0.035 in |
| AWS class | E308LFC-O (A5.22) | E71T-GS | E71T-11 (A5.20) | E71T-GS |
| Base metal | Stainless steel | Carbon steel | Mild steel | Mild steel |
| Spool | 10 lb | 10 lb | 10 lb | 10 lb |
| Positions | Flat and horizontal | All positions | Multi-pass fillet and lap welding; positions not stated | All positions |
| Tensile strength | 70 KPSI | Not stated | Not stated | Not stated |
| Packaging | Not stated | Robust spool against breakage and wastage | Vacuumed aluminum foil | Vacuum packed |
Treat the specs as maker ratings pulled straight from the listings; we gathered them on 21 October 2026. All four are gasless flux core wires on 10 lb spools; the differences are diameter, AWS class and base metal.
Diameter: 0.035 in vs 0.045 in
The two 0.035 in wires, the VEVOR and the Jimm, share the E71T-GS class and 10 lb spools. The two 0.045 in wires differ from each other more than the 0.035 in pair does: the Blue Demon is a stainless E308LFC-O wire and the WeldingCity is a mild steel E71T-11 wire. Diameter alone does not decide the better wire here, because the 0.045 in side is really two different wires for two different metals.
AWS class and base metal
The listings state three AWS classes. The VEVOR and Jimm are both E71T-GS, with no conformance number stated beyond the class label. The WeldingCity E71T-11 states conformance to AWS A5.20, the strongest paper claim among the carbon steel wires. The Blue Demon E308LFC-O states AWS A5.22, and it is the only wire here for stainless: all 300 series up to and including 308L, plus 430 series, per its listing. Match the wire to the metal first; everything else is secondary.
Positions and outdoor use
The VEVOR and Jimm listings both state all-position welding, and the Jimm adds single and multi-pass work. The Blue Demon is limited to flat and horizontal positions, stated plainly. The WeldingCity listing states no positions, only multi-pass fillet and lap welding, so its positional range is unclear. All four are gasless, and three listings say so as an outdoor advantage: the VEVOR notes no gas to be blown away by wind, the Jimm calls itself excellent for outdoor windy conditions, and the Blue Demon pitches mobile and outdoor jobs.
Spool, weight and packaging
Every wire here comes on a 10 lb spool: 10 lb stated by the VEVOR and WeldingCity, 10 lb in the Jimm title against 10.01 lb in its spec table, and 10 lb in the Blue Demon title against 10.7 lb in its table. Packaging is where they differ. The Jimm is vacuum packed to keep out moisture and dust, per its bullets. The WeldingCity ships in vacuumed aluminum foil. The VEVOR credits a robust spool against breakage and wastage. The Blue Demon states nothing about packaging.
Choose 0.035 if
- You weld carbon or mild steel and want an all-position wire.
- You want the choice between the VEVOR low-spatter listing and the Jimm vacuum-packed listing.
- Your work is mostly home-shop repairs in any position.
Choose 0.045 if
- You weld stainless without gas and want stated tensile figures: the Blue Demon 308LFC-O.
- You want AWS A5.20 conformance on record for mild steel: the WeldingCity E71T-11.
- You weld flat and horizontal and want the larger diameter of the two.
FAQ for welders
Can I run 0.045 in wire in a small welder?
None of these listings states a minimum machine size. Check your welder’s manual for the wire diameters its drive rolls and contact tips accept before buying either side.
What is the difference between E71T-GS and E71T-11?
Both are gasless flux core classes in these listings. The practical difference on paper: the WeldingCity E71T-11 states AWS A5.20 conformance, while the two E71T-GS wires state no conformance number beyond the class label.
Can I weld stainless with flux core and no gas?
The Blue Demon 308LFC-O is listed as exactly that: a gasless stainless flux core wire for all 300 series stainless up to and including 308L, plus 430 series. The other three wires here are for carbon and mild steel.
Do I need shielding gas with any of these wires?
No. All four are gasless or self-shielded per their listings: the VEVOR and Jimm are gasless E71T-GS, the WeldingCity is self-shielded E71T-11, and the Blue Demon flux core acts in place of shielding gas.
Which side is better for windy outdoor welding?
Both, per the listings. The VEVOR notes there is no gas to be blown away by wind, the Jimm calls itself excellent for outdoor windy conditions, and the Blue Demon pitches mobile and outdoor jobs. Gasless wire is the whole point on a gusty day.
Related: 035 vs 045 MIG wire, best 035 flux core welding wire and best flux core welder.
Scoring, line by line
Each wire is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. No listing here states a safety certification or a warranty term, so both score zero across the board; the ranking comes from stated specs and listing detail.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Blue Demon 308LFC-O | 9.7 | 30 | 22 | 21 | n/a | 0 |
| VEVOR E71T-GS 0.035 | 9.6 | 29 | 21 | 21 | n/a | 0 |
| WeldingCity E71T-11 0.045 | 9.6 | 29 | 21 | 20 | n/a | 0 |
| Jimm E71T-GS 0.035 | 9.6 | 28 | 21 | 20 | n/a | 0 |
Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.
Before you strike an arc. Flux core welding throws spatter and fumes: wear a helmet with the right shade, safety glasses underneath, leather gloves and flame resistant clothing, and weld with ventilation that moves fumes away from your breathing zone. Keep anything flammable clear of the arc and the hot metal. See the OSHA welding overview.




