What Is a Propane Regulator and How It Works
A propane regulator drops tank pressure to the pressure the appliance wants, and the kind you need depends on the appliance.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Flame King (KT12ACR-2a) 2-Stage Auto Changeover LP9.6/10View on Amazon - 2
SHINESTAR 2 FT Propane Regulator with Hose9.6/10View on Amazon - 3
GasOne 2109-RED 4 ft High Pressure 0-20 PSI9.5/10View on Amazon - 4
DPB 6Ft Propane Regulator with Stainless Steel9.5/10View on Amazon
A propane regulator is the fitting between the tank and the burner that drops tank pressure to the pressure the appliance wants. A forge burner, a melting furnace, a grill or a patio heater each wants a steady feed at its own pressure. This guide answers what is a propane regulator, the kinds you will meet, and how to match a regulator to the appliance.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Flame King (KT12ACR-2a) 2-Stage Auto Changeover LP
A 2-stage auto changeover LP regulator for RVs with dual tanks, UL Listed, rated 345,200 BTU, factory set at 11 WC, with two 12-inch pigtails.
Pros
- Auto changeover switches from primary to reserve tank without interrupting supply
- UL Listed, with 1/4 in SAE inverted flare inlets and 3/8 in NPT female outlet
- Rated 345,200 BTU with a double-stage design that holds pressure steady
- Empty cylinder comes off for refill without stopping the gas supply
Cons
- Made for RVs with dual tanks, not a single-tank setup
- 30-day warranty is short
- 12-inch pigtails keep the tanks close to the regulator
- No hose is included beyond the two 12-inch pigtails

SHINESTAR 2 FT Propane Regulator with Hose
A 2 ft low-pressure propane regulator with hose, CSA certified with excess flow protection, holding a steady 0.4 PSI (11 in W.C.) for grills, heaters and fire pits.
Pros
- CSA certified with built-in excess flow protection against leaks
- Steady 0.4 PSI (11 in W.C.) output up to 80,000 BTU/hr
- Tool-free setup with a QCC-1/Type-1 connector and a hand wheel
- Fits Weber, Char-Broil, Nexgrill, Monument grills and Blackstone griddles
Cons
- For low-pressure appliances only; not for Weber Traveler or Q series
- 2 ft hose is short for a tank set far from the appliance
- No warranty term is stated
- No gauge to show remaining gas

GasOne 2109-RED 4 ft High Pressure 0-20 PSI
A 4 ft high-pressure propane regulator with hose, adjustable from 0 to 20 PSI with a red knob, for burners, heaters, smokers and fryers.
Pros
- Adjustable 0 to 20 PSI with a red knob for burners, heaters, smokers and fryers
- 4 ft hose, ⅜-inch flare fitting inside, ⅝-inch outside diameter
- Rubber and brass connections for an air-tight, leak-free connection
- Ready to use out of the box with a QCC-1 Type-1 tank connection
Cons
- Tools are required for a tight, leak-free connection
- The output must be set by hand with the red knob for each appliance
- No warranty term is stated
- The 4 ft hose limits how far the tank sits

DPB 6Ft Propane Regulator with Stainless Steel
A 6 ft propane regulator with a stainless steel braided hose and a tri-color tank gauge, holding a fixed 11 in WC output for grills, heaters and fire pits.
Pros
- 6 ft stainless steel braided hose, 3/8 in female flare fitting
- Tri-color tank gauge shows remaining gas at a glance, even in the dark
- Four-layer hose with brass fittings for abrasion and corrosion resistance
- Fixed 11 in WC output for 5 to 40 lb tanks and low-pressure appliances
Cons
- Fixed 11 in WC output; not adjustable
- Noise in the regulator is normal, which can read as a fault
- The 6 ft hose is long to coil and store
- The gauge shows remaining gas, not output pressure
What is a propane regulator
A propane regulator sits between the tank and the appliance and drops tank pressure to the pressure the appliance wants. The fixed models here hold 11 inches of water column, and the adjustable model lets you set the output from 0 to 20 PSI with a knob. The Flame King’s double-stage design holds pressure steady under changing demand.
An adjustable high-pressure regulator, like the GasOne, turns a knob to set the output anywhere from 0 to 20 PSI for burners, heaters, smokers and fryers. A fixed low-pressure regulator holds one pressure, and the fixed models here hold 11 inches of water column, which suits grills, fire pits and heaters. The Flame King is a 2-stage auto changeover regulator, factory set at 11 WC, that switches from a primary tank to a reserve tank when the primary runs empty.
Side by side
| Adjustable high-pressure | Fixed low-pressure | Auto changeover | |
|---|---|---|---|
| Output | 0 to 20 PSI, knob set | 11 in WC, fixed | 11 WC, factory set |
| Hose | 4 ft, ⅜ in flare | 2 ft or 6 ft, 3/8 in flare | Two 12 in pigtails |
| Tank fitting | QCC-1 Type-1 | QCC-1 Type-1 | Pigtails to the tank |
| Typical use | Burners, heaters, smokers, fryers | Grills, fire pits, heaters | RVs with dual tanks |
The output figures are the pressure each regulator holds, not the pressure in the tank. Match the regulator to the pressure the appliance wants.
When an adjustable regulator is the better choice
- Burners and heaters. The GasOne adjusts from 0 to 20 PSI, which covers burners, heaters, smokers and fryers.
- One regulator for several appliances. Turn the knob to the pressure each appliance wants.
- High heat work. A burner that wants more than 11 inches of water column needs a higher-pressure feed than the fixed models here give, and the GasOne is the high-pressure model in this guide.
- Smokers and fryers. The GasOne lists smokers and fryers among its uses, which the fixed grill regulators do not name.
When a fixed regulator is the better choice
- Grills and griddles. The SHINESTAR holds a steady 0.4 PSI for grills, and the DPB holds a fixed 11 inches of water column for grills, heaters and fire pits.
- Fire pits and patio heaters. The SHINESTAR and the DPB both list fire pits and heaters among their uses.
- RVs with dual tanks. The Flame King switches from the primary tank to the reserve tank on its own, so the gas keeps flowing while the empty cylinder comes off for refill.
- No knob to set. A fixed regulator holds one pressure with nothing to adjust. The fixed models here hold 11 inches of water column, so the pressure is right each time you hook up for an appliance that wants 11 inches of water column.
Our single stage vs dual stage gas regulator guide explains the two stages.
How to read the numbers on a regulator
The numbers on a regulator tell you what the appliance gets. The output pressure is 0 to 20 PSI adjustable on the GasOne, or a fixed 11 inches of water column on the fixed models. The flow rating is 345,200 BTU on the Flame King and up to 80,000 BTU per hour on the SHINESTAR. The hose is 4 ft on the GasOne, 2 ft on the SHINESTAR, 6 ft on the DPB, and two 12-inch pigtails on the Flame King.
The fittings matter as much as the numbers. All four regulators here use a QCC-1 tank connection or pigtails to the tank. The SHINESTAR and the DPB end in a 3/8 inch female flare, the GasOne hose has an inside ⅜-inch flare fitting, and the Flame King outlet is a 3/8 inch NPT female pipe thread. Check the fitting on the appliance before you buy.
A propane forge runs on a regulated feed; see our best propane forge for blacksmithing roundup.
The regulators
The regulators below cover the feed a propane appliance needs: an adjustable model for burners and heaters, fixed models for grills and fire pits, and an auto changeover model for RVs with dual tanks.
Propane leaks and pressure. Check every fitting with soapy water before you light up, keep the tank upright and outdoors or in strong ventilation, and shut the tank valve when done. A regulator only controls pressure, so a loose fitting can still leak; check the connection each time you hook up. See the OSHA welding overview and our Safety Disclaimer.
FAQ for welders
What does a propane regulator do?
It drops the pressure from the tank to the pressure the appliance wants. The fixed models here hold 11 inches of water column, and the adjustable model lets you set 0 to 20 PSI with a knob. The Flame King’s double-stage design holds pressure steady under changing demand.
What is the difference between a high-pressure and a low-pressure regulator?
A high-pressure regulator, like the GasOne, adjusts from 0 to 20 PSI for burners, heaters, smokers and fryers. The low-pressure regulators here hold a fixed 11 inches of water column, about 0.4 PSI, for grills, fire pits and heaters. Match the regulator to the pressure the appliance wants, not to the tank.
What is 11 inches of water column?
It is a low pressure measure, about 0.4 PSI, used for gas appliances. The Flame King is factory set at 11 WC, the SHINESTAR holds 0.4 PSI (11 inches W.C.), and the DPB holds a fixed 11 inches WC. It is the pressure the fixed regulators here hold.
Do I need a regulator for a propane forge or furnace?
Yes, if the burner runs on propane from a tank. A forge burner or a melting furnace needs a feed at the pressure the burner wants, and a regulator drops the tank pressure to that pressure. The GasOne adjustable model covers 0 to 20 PSI for burners and heaters.
How do I check a propane connection for leaks?
Use soapy water around the fittings before you light up: 20 percent soap and 80 percent water. A leak shows as bubbles, so shut the tank off and tighten the fitting before lighting.
Related: best propane gas regulator, single stage vs dual stage gas regulator, gas forge vs coal forge, and the welding consumables hub. Also see our best propane forge for blacksmithing.




