What Size TIG Filler Rod for 1/8 Steel?
Choose the right TIG filler rod size for 1/8 steel by comparing 3/32 and 1/16 inch ER70S-6 wire for puddle control, joint fit-up, and…
TIG welders for clean, precise welds on steel, stainless and, with AC output, aluminum. We compare AC and DC capability, amperage range, pedal and torch options, and input power.
Choose the right TIG filler rod size for 1/8 steel by comparing 3/32 and 1/16 inch ER70S-6 wire for puddle control, joint fit-up, and…
How to TIG weld without a foot pedal using torch switches, lift TIG start, and machine heat settings for clean welds in the shop…
HF start and lift arc TIG ignite arcs differently, affecting tungsten contamination, electrical interference, thin metal control, and equipment setup.
TIG welds turn black when shielding gas is lost, gas flow is turbulent, base metal is contaminated, or post-flow shuts off before the puddle…
How to set the proper TIG welding argon flow rate, choose the right flowmeter, adjust for cup size, and prevent weld contamination without wasting…
Learn how to sharpen tungsten for TIG welding with longitudinal grinding, proper taper angles for your amperage, and clean cut-off preparation.
A practical guide to choosing what color tungsten for steel, comparing blue, red, gray, and purple electrodes for arc stability, tip life, and clean…
Blue 2% lanthanated is the top tungsten choice for AC aluminum TIG welding, while purple rare earth, gray ceriated, and green pure tungsten suit…
How AC balance and frequency work together when TIG welding aluminum, how to set cleaning and arc focus for your joint, and where to…
TIG and MIG welding suit different beginner projects, differing in learning curve, equipment setup, metal thickness, and whether you need speed or fine control.