Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Strong Hand MS346AK Review: Pros, Cons & Who It’s For

A Strong Hand MS346AK review from the listing: a 6-pack of 25 lb multi-angle mini welding magnets with 30°/60°, 45° and 90° angles, their limits and who they suit.

Strong Hand MS346AK Review: Pros, Cons & Who It’s For
On this page

This Strong Hand MS346AK review comes down to one point: the MS346AK suits a hobbyist, farmer or fab shop welder who needs compact, multi-angle holding at several points on the bench for light-duty tack welding. Strong Hand Tools lists a 25 lb pull force per square, preset 30°/60°, 45° and 90° angles, and a low-profile 2-5/16 in height for tight spots. We have not used these magnets ourselves; this review is based on Strong Hand Tools’ Amazon listing for the MS346AK and the specs published there.

As an Amazon Associate I earn from qualifying purchases. WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

The magnets

Strong Hand MS346AK Multi-Angle Mini Magnet

Strong Hand MS346AK Multi-Angle Mini Magnet

Strong Hand Tools9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6-pack of 25 lb multi-angle mini welding magnets with 30°/60°, 45° and 90° angles, a low-profile 2-5/16 in height, screwdriver breakaway holes and aluminum rims.

Pros

  • Holds stock at four common joint angles: 30°/60°, 45° and 90°
  • Compact 2-5/16 in height fits into tight, hard-to-reach joint spaces
  • Center release hole lets you use a screwdriver for easy breakaway
  • Aluminum rim enclosure protects the magnet and makes cleaning off shop shavings easy

Cons

  • Rated at 25 lb pull force, so it is limited to light-duty stock holding
  • No warranty term is stated on the listing
  • No safety certification is stated on the listing

Strong Hand MS346AK review: the short verdict

The MS346AK is a set of multi-angle mini welding magnets designed for fixturing small pieces, tubing and odd-shaped metal stock before tack welding. Strong Hand Tools packages them as a 6-pack with a total stated weight of 1.7 lb, sold under model number MS346AK and part number VAL-MS346AK.

Several listed features carry the case for this kit. The squares provide four angles in one body: 30°/60°, 45° and 90°, covering common joint configurations in fabrication. The low-profile height of 2-5/16 in lets you slip them into restricted corners where full-size magnetic squares cannot fit. In addition, an aluminum rim enclosure protects the magnet and makes wiping away shop grit straightforward, while a center hole lets you insert a screwdriver for quick breakaway release.

The weak spots are listing contradictions and missing paperwork. The Amazon spec table lists the shape as round and the item count as 1, which directly contradicts the bullets describing a 6-pack of square magnets. Furthermore, the listing states no warranty term and no safety certification, leaving those details for buyers to confirm with the seller.

Key specs

Product Pull Force Angles Pack Size
Strong Hand MS346AK 25 lb 30°/60°, 45° and 90° 6 pieces

Ratings in this table are the makers’ own claims taken from each product page (14 October 2026). Pull force reflects the maker’s listed capacity for light-duty holding, and measurements match the listing’s published dimensions.

What the MS346AK does well

Four angles in a compact square

Each mini magnet square provides 30°/60°, 45° and 90° holding surfaces. That means a single magnet handles square corners, mitered 45° frames, and triangular gussets or braces without needing separate dedicated fixtures. Having these angles on each piece simplifies bench layout when building small frames, brackets or decorative projects. Our guide on how to use welding magnets covers how to align stock accurately with preset angles.

Low profile for restricted corners

At 2-5/16 in tall, 2 in wide and 5/8 in thick (listed in the spec table as 2.31 in long, 2 in wide and 0.63 in thick), these magnets fit into tight spaces where larger fabrication clamps and full-sized magnets will not clear. When you are assembling an internal corner or a small box structure, standard clamps often bump against opposing walls or interfere with your torch nozzle. These low-profile squares tuck inside small cavities to keep stock steady while you place your tacks.

Six holding points in one pack

Strong Hand Tools supplies six mini squares in the package. In fabrication, fixturing stock at multiple contact points helps align odd-shaped pieces and supports stock along its length before tacking. Having six matching magnets allows you to support both ends of a workpiece or fixture a multi-sided assembly at once without buying multiple separate packs.

Screwdriver release hole and aluminum rim

Prying magnets off flat steel by hand can pinch fingers or shift carefully aligned stock. The MS346AK includes a center release hole where you insert a screwdriver to lever the magnet off the workpiece cleanly. Additionally, the outer edges feature a durable aluminum rim enclosure. The aluminum rim protects the casing and makes wiping shop dust and metal shavings off the body easy at the end of the job.

Limitations

  • Light-duty pull force: each square is rated for up to 25 lb (11.3 kg) of pull force. That is sufficient for sheet, small tubing and light bar, but inadequate for heavy structural plate or warped stock that requires mechanical clamping force.
  • Listing contradictions: the Amazon spec table lists the shape as round and number of items as 1, whereas the title and bullets clearly specify a 6-pack of multi-angle squares. Buyers must rely on the title and bullet descriptions.
  • No on-off switch: the squares lack a mechanical on-off release switch, so separating the squares from stock requires prying through the center hole with a screwdriver.
  • No warranty term stated: the listing does not publish a warranty period, terms or replacement policy. If warranty coverage is important for your shop tooling, you must contact Strong Hand Tools directly.
  • No safety certification stated: no third-party safety or quality marks appear on the listing.

How we scored it

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Strong Hand MS346AK 9.6 29 20 21 n/a 0

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.

The Gear Score weighs performance, build, value, safety and warranty, as explained on our how we pick page. The MS346AK scores well on performance for its practical angles, compact height and clever screwdriver release hole. Build receives solid marks for the aluminum rim enclosure, though listing contradictions temper the score. Value is high because six multi-angle squares are included in a single package. Safety and warranty score zero because no certifications or warranty terms are stated on the listing.

Who should buy the Strong Hand MS346AK, and who should skip it

Buy it if

  • You fabricate small projects, brackets, light frames or sheet assemblies on the bench.
  • You need compact holding tools that slip into tight spaces where larger magnets cannot clear.
  • You want multiple holding points without buying multiple individual magnet packs.
  • You value preset 30°/60°, 45° and 90° angles for rapid fit-up.

Skip it if

  • You work with heavy steel plate or structural tubing that requires mechanical force; consider angle clamps for welding instead.
  • You need switchable magnets that turn on and off with a knob or lever so grinding dust wipes off freely.
  • You require written warranty terms or formal safety certifications documented on the listing.

Before You Strike an Arc

Before using the Strong Hand MS346AK magnets on your welding bench, run through these essential setup and inspection checks:

  • Inspect on arrival: check that all six mini magnet squares are in the package and verify that the aluminum rim enclosures have no shipping damage.
  • Clean contact faces: wipe any metal dust or filings from the aluminum rims and contact faces so the squares seat flush against your stock.
  • Check screwdriver release: confirm that a screwdriver slips easily into the center release hole for quick breakaway before fixturing.
  • Confirm joint angles: verify that your joint layout aligns with the preset 30°/60°, 45° or 90° surfaces before tacking.

Alternatives

FAQ for welders

What angles does the Strong Hand MS346AK provide?

The listing states that each mini magnet square provides 30°/60°, 45° and 90° angles. That range covers standard joint angles for sheet, tube and flat bar fabrication on the bench. Having multiple angles on each piece lets you set up mitered corners and angular braces without changing fixtures.

How much weight does each Strong Hand MS346AK magnet hold?

Each mini magnet square has a listed pull force of up to 25 lb, or 11.3 kg. The maker describes this as light-duty holding for fixturing and tack welding odd-shaped stock. For heavy structural beams or thick plate, you will need larger fabrication clamps or higher-capacity magnets.

How do you release the Strong Hand MS346AK from stock?

Each square has a center release hole in its body. You insert a screwdriver into the center hole to pry the magnet away from the metal for an easy breakaway. This saves your fingers and prevents dragging metal shavings across the contact face.

Does the Strong Hand MS346AK come with a warranty?

No warranty term is stated on the Amazon listing for the MS346AK. Strong Hand Tools does not list a specific warranty duration or coverage policy on the product page. Buyers who need written warranty terms should contact the manufacturer directly before purchasing.

Related: how to use welding magnets, types of welding clamps, welding magnets with on off switch, and the welding tables and carts hub.

More buying guides