Steel vs Teflon Mig Liner: Which One Should You Buy?
Steel vs teflon MIG liner: which type your wire needs. Four steel liner listings compared on wire size, gun fit and length.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
1-Lb ER308L Stainless Steel 308 TIG Welding Rod 3/32"x36"9.7/10View on Amazon - 2
Steel Conduit Liner 35-40-15View on Amazon - 3
Steel Conduit Liner 42-3035-15View on Amazon - 4
YESWELDER 8 in MIG Welding PliersView on Amazon - 5
TOOLIOM ER70S-6 0.035" Mild Steel MIG Welding Wire 10LB HighView on Amazon - 6
TOOLIOM ER70S-6 .035" Mild Steel MIG Welding Wire 10LB 2PCSView on Amazon - 7
TOOLIOM ER70S-6 .030" Mild Steel MIG Welding Wire 10LB 2PCSView on Amazon
Your MIG gun feeds fine for the first few inches of wire, then the arc starts to stutter and you find a bird nest at the drive rolls. The problem is often the liner, the tube inside the gun cable that guides the wire from the rolls to the contact tip. The question of steel vs teflon mig liner comes down to what wire you run. A steel liner is the default for steel MIG wire, and every liner in the four listings below is a steel liner. No teflon liner is listed here, so the teflon side rests on what these listings do not state.
Other welders and gear to compare
Steel Conduit Liner 35-40-15Check price on Amazon
Steel Conduit Liner 42-3035-15Check price on Amazon
YESWELDER 8 in MIG Welding PliersCheck price on Amazon
TOOLIOM ER70S-6 0.035" Mild Steel MIG Welding Wire 10LB HighCheck price on Amazon
TOOLIOM ER70S-6 .035" Mild Steel MIG Welding Wire 10LB 2PCSCheck price on Amazon
TOOLIOM ER70S-6 .030" Mild Steel MIG Welding Wire 10LB 2PCSCheck price on Amazon
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
steel vs teflon mig liner: the short answer
Run a steel liner with steel MIG wire. That is what all four of the listings in this guide are: steel liners, with wire sizes from .023 to .035 inch across the four listings. None of the four is a teflon liner, so this guide does not score a teflon pick. Either way, match the liner part number to your gun manual, not to the welder brand alone.
Side by side
| Liner choice | Steel liner | Teflon liner | What the listings state |
|---|---|---|---|
| What it is | Coiled steel conduit the wire runs through | A softer liner material some welders use for soft wire | Pick by wire, not by gun |
| Wire named in the listings | Wire sizes .023 to .035 inch named across the four; steel wire named by Lincoln Electric and WeldingCity | No teflon liner is listed | Every listing here is a steel liner |
| Gun fit named in the listings | Lincoln Magnum 100L, PRO 100L and 175L in the Generic, Lincoln Electric and WeldingCity listings; Tweco Mini and No.1 in the WeldingCity listing | Not stated in these listings | Match the part number to your gun manual |
| Length named in the listings | 15 ft on the Lincoln Electric and WeldingCity listings | Not stated in these listings | Measure your gun cable before you order |
| Amp class named in the listings | 100 to 180A class in the WeldingCity listing only | Not stated in these listings | The range describes the gun class |
| Feeding claim | Smooth feeding from feeder to tip, maker states | Not stated in these listings | A dirty liner drags either way |
The four steel liners we looked at
All four listings are steel liners for MIG wire, and the Lincoln Electric and WeldingCity listings state 15 ft. In order of how well the listing fits a common gun:
Lincoln Electric KP35-40-15. A 15 ft steel liner for Magnum PRO 100L and 175L guns, sized for .023 to .035 inch wire. The maker states its liners give smooth feeding from the feeder to the tip to reduce downtime. Made in Mexico; package weight 1.0 pounds, item weight 9.9 ounces.
WeldingCity steel conduit liner 35-40-15. A 15 ft steel liner for .030 to .035 inch wire, stated for Lincoln Magnum 100L and Tweco Mini and No.1 guns in the 100 to 180A class. The maker also lists 23-40-15 for .023 to .025 inch wire, and describes itself as a U.S. based supplier with technical support. Item weight 9 ounces.
Generic KP1937-3 replacement. A single strand replacement liner for Lincoln Magnum 100L and Magnum PRO 100L and 175L guns, stated for .025 to .035 inch wire. Flag: the spec table lists a single 0.03 inch wire diameter while the title and bullets state .025 to .035, and the title and bullets are what to trust. Model WLL1937.
Hobart 196139. A replacement liner stated for .023 to .035 inch wire, part number 196139, item weight 12.6 ounces, country of origin China. The listing names a manufacturer warranty but states no term for it.
Match the liner to wire size and gun
A liner has to fit the wire and the gun. Size to the wire first. A 35-40-15 liner is stated for .030 to .035 inch wire, and the same family covers .023 to .025 with a 23-40-15, per the WeldingCity listing. Then match the gun: the Lincoln listings name Magnum 100L, Magnum PRO 100L and 175L guns, while the WeldingCity listing names Tweco Mini and No.1 guns too. When the part number in the listing matches the number in your gun manual, the liner seats the way the gun maker intended.
When steel is the right call, and when it is not
Steel is the right call when you run steel MIG wire, which is what every listing here is built for. Steel coil holds its shape inside the cable, and the listings above cover .023 to .035 inch wire. The listings here name steel and hard alloy MIG wire only, so they do not cover a soft-wire case. Match the liner to the wire the listing names.
FAQ for welders
Can I run aluminum wire through a steel liner?
None of the four listings names aluminum wire; they name steel and hard alloy MIG wire. If you plan to run aluminum, look for a liner listing that names aluminum wire, since none of the four here does.
What wire size fits a 35-40-15 liner?
The WeldingCity 35-40-15 liner is stated for .030 to .035 inch wire. For .023 to .025 inch wire the same maker lists a 23-40-15. Size the liner to the wire you run.
How long should the liner be?
The Lincoln Electric and WeldingCity listings state 15 ft. Measure your gun cable and follow the gun manual for trimming and seating, since a liner that is short of the tip feeds poorly.
Will these liners fit a Tweco gun?
The WeldingCity listing states Tweco Mini and No.1 guns. The Generic and Lincoln Electric listings name Lincoln Magnum guns only; the Hobart listing names no gun. Check the gun model against the listing before you order.
Do any of these liners carry a warranty?
The Hobart listing names a manufacturer warranty with no term stated. The Generic, WeldingCity and Lincoln Electric listings state no warranty term. Treat the liner as a consumable and keep a spare on the shelf.
Related: flux core vs MIG for outdoor use, .030 vs .035 MIG wire, and best welding gas hose.




