Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Nylon vs Teflon Mig Liner: Which One Should You Buy?

A liner that drags or feeds rough can cause feeding trouble that shows up in the bead, and the choice turns on what each listing states about material, wire size and gun fit.

Nylon vs Teflon Mig Liner: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1STARTECHWELD 44-3545-15 MIG Welding Liner Conduit .035"-.045"STARTECHWELD 44-3545-15 MIG Welding Liner Conduit .035"-.045"View on Amazon
  2. 2WeldingCity 15-ft Teflon Conduit Liner 194T-011WeldingCity 15-ft Teflon Conduit Liner 194T-011View on Amazon
  3. 3WeldingCity 15-ft Teflon Conduit Liner 194T-012WeldingCity 15-ft Teflon Conduit Liner 194T-012View on Amazon
  4. 4WeldingCity Teflon Conduit Liner 35T-40-15WeldingCity Teflon Conduit Liner 35T-40-15View on Amazon
  5. 5WeldingCity Teflon Conduit Liner 45T-40-15WeldingCity Teflon Conduit Liner 45T-40-15View on Amazon
  6. 6Mig Liners USA L3A-25 Bernard Style LinersMig Liners USA L3A-25 Bernard Style LinersView on Amazon

A liner that drags, kinks or feeds rough can cause feeding trouble that shows up in the bead, and the choice in nylon vs teflon mig liner comes down to what the listing actually states about material, wire size and gun fit. For soft wire such as aluminum, the Teflon listings in this guide are the stated match. For other wire, match the liner to the gun and the wire size the listing names, because some listings here name no liner material at all.

Other welders and gear to compare

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

The difference in one paragraph

A MIG liner guides wire from the drive rolls through the gun to the contact tip, and friction inside that conduit affects how smoothly wire feeds. The Teflon listings in this guide present Teflon as the conduit for soft wire, and the WeldingCity listings state that Teflon conduit liner is ideal for welding soft welding wires such as aluminum and alloy. The other two listings in this guide name a gun fit and a wire size but name no liner material in the title or bullets, so they cannot be claimed for either side of the material question. When a listing states a material, use it; when it does not, gun fit and wire size carry the decision.

Side by side: nylon vs teflon mig liner

Teflon liner listings Listings with no material stated Check before ordering
Material stated Teflon, for soft wire Not stated in the title or bullets Read the listing material line
Soft wire match Aluminum and other soft alloy Not stated Match wire type to the listing
Wire sizes 0.030-0.035 .025-.035 and .035-.045 Match the wire size exactly
Length 15-ft 15 FT stated on one; no length stated on the other Confirm length before ordering
Gun fits stated Tweco Mini and Lincoln Magnum 100L; Miller MIGmatic M-series and Hobart H-series Lincoln Magnum 100L and Magnum PRO 100L and 175L; Tweco 3 and 4 and Lincoln Magnum 300 and 400 Match the gun model exactly
Amp range 100-180 Amp guns named in one Teflon listing; not stated on the other Not stated Check the gun manual

Figures in the table come from the listing for that exact liner. A figure from one listing describes that listing only, and a blank means the listing leaves it unstated, not that the liner lacks it.

When Teflon is the stated choice

A Teflon listing is the stated match when the wire is soft. Both WeldingCity Teflon listings state the soft wire case directly: Teflon conduit liner is ideal for welding soft welding wires such as aluminum and alloy, and the 35T-40-15 listing adds that it is for use with soft metal MIG welding wire. The 194T-011 listing covers Miller MIGmatic M-series and Hobart H-series H-9 and H-10 MIG welding guns, while the 35T-40-15 listing covers Tweco Mini and #1 and Lincoln Magnum 100L MIG welding guns. Both state a 15-ft length and a 0.030-0.035 wire range, so the choice between them turns on gun fit. Only the 35T-40-15 listing names guns in a 100-180 Amp range.

When the listing names no material

Two listings here name no liner material, and they still give a usable fit check. The replacement Lincoln liner KP1937-3 is stated for use with Magnum 100L and Magnum PRO 100L and 175L MIG guns, with .025 to .035 wire. The STARTECHWELD 44-3545-15 liner is stated for Tweco 3 and 4 and Lincoln Magnum 300 and 400 guns, with .035-.045 wire and a 15 FT length. Neither listing states a material, an amp range or a soft wire claim, so buy either one only when its gun list and wire range match the gun and wire on the bench. See our steel vs Teflon MIG liner guide for the steel side of the same question, and our best MIG welding wire guide for wire choice.

How to match a liner to gun and wire

Work through the listing in order, and stop at the first mismatch.

  • Gun model. The listing must name the gun. A Tweco Mini fit does not imply a Tweco 3 fit, and a Miller MIGmatic M-series fit does not imply a Hobart fit unless the listing names both.
  • Wire size. The wire range must cover the wire being fed. The listings here state .025-.035, .035-.045 and 0.030-0.035 ranges, and those ranges are not interchangeable.
  • Material, when stated. For soft wire such as aluminum, pick a listing that states Teflon for soft wire. When no material is stated, do not assume one.
  • Length and pack. Both WeldingCity Teflon listings and the STARTECHWELD listing state a 15-ft or 15 FT length. The replacement Lincoln listing states no length, and the WeldingCity listings note that colors vary by batch, so color is not a fit check.

Both WeldingCity listings direct the reader to the MIG welding gun user manual for selection of the correct liner.

Liner examples, ranked

WeldingCity 35T-40-15 Teflon liner. Ranked first because its listing states the most complete fit picture: Teflon for soft metal MIG welding wire, a 0.030-0.035 wire range, a 15-ft length, and fits for 100-180 Amp Tweco Mini and #1 and Lincoln Magnum 100L guns. Colors vary by batch, per the listing.

WeldingCity 194T-011 Teflon liner. Ranked second: it states Teflon for soft wire, a 0.030-0.035 wire range, a 15-ft length, and fits for Miller MIGmatic M-series and Hobart H-series H-9 and H-10 guns. It states no amp range, and its bullets describe the wider 194 series, so only the 194-011 wire range applies to this liner.

STARTECHWELD 44-3545-15 liner. Ranked third: it states a .035-.045 wire range, a 15 FT length, and fits for Tweco 3 and 4 and Lincoln Magnum 300 and 400 guns. It states no liner material and no amp range, so it ranks behind the two Teflon listings for a soft wire job.

Replacement Lincoln KP1937-3 liner. Ranked fourth: it states fits for Magnum 100L and Magnum PRO 100L and 175L guns with .025 to .035 wire. It states no length, no weight and no liner material, so it gives the thinnest fit picture of the four. Its stated gun and wire fit is the only claim to buy it on.

For wire choice, see our best aluminum MIG wire for beginners guide, and the welding consumables hub.

Liner fit and shop safety. A liner that does not match the gun can jam or feed rough. Match the gun model and wire size from the listing, check the gun manual the WeldingCity listings point to, and weld with ventilation.

FAQ for welders

Can a Teflon liner run aluminum wire?

Yes, on the listings in this guide. Both WeldingCity Teflon listings state that Teflon conduit liner is ideal for welding soft welding wires such as aluminum and alloy. Match the gun fit as well: the 35T-40-15 listing names Tweco Mini and #1 and Lincoln Magnum 100L guns, while the 194T-011 listing names Miller MIGmatic M-series and Hobart H-series guns.

What wire sizes do the Teflon listings cover?

Both Teflon listings in this guide state a 0.030-0.035 wire range. Check the wire range on the exact liner being ordered, not on another liner in the same series.

What if a listing does not state a liner material?

Buy on gun fit and wire size only. The replacement Lincoln listing states Magnum 100L and Magnum PRO 100L and 175L fits with .025 to .035 wire, and the STARTECHWELD listing states Tweco 3 and 4 and Lincoln Magnum 300 and 400 fits with .035-.045 wire. Neither listing states a material, so neither supports a material claim.

Does liner length matter?

Both WeldingCity Teflon listings state a 15-ft length, and the STARTECHWELD listing states a 15 FT length. The replacement Lincoln listing states no length, so confirm it from the listing or the gun manual before ordering.

Can one of these liners fit every MIG gun?

No. None of the four listings claims every-gun fit. A liner stated for Tweco Mini guns is not stated for Tweco 3 guns, and a liner stated for Miller MIGmatic M-series guns is not stated for Lincoln Magnum 300 guns. Match the gun model exactly, then the wire size, then the material when the listing states one.

Related: steel vs Teflon MIG liner, best MIG welding wire, best aluminum MIG wire for beginners, and the welding consumables hub.

More buying guides