Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Steel vs Nylon MIG Liner: Which One Should You Buy?

Steel MIG liners in this guide differ in bore, wear and fit, and the soft-wire side rests on a Teflon listing, not on a nylon liner.

Steel vs Nylon MIG Liner: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 11-Lb ER308L Stainless Steel 308 TIG Welding Rod 3/32"x36"1-Lb ER308L Stainless Steel 308 TIG Welding Rod 3/32"x36"9.7/10View on Amazon
  2. 2WeldingCity Steel Conduit Liner 194-011WeldingCity Steel Conduit Liner 194-011View on Amazon
  3. 3STARTECHWELD 194-012 MIG Welding Liner Conduit .045"STARTECHWELD 194-012 MIG Welding Liner Conduit .045"View on Amazon
  4. 4Bernard LinerBernard LinerView on Amazon
  5. 542-3035-25 Mig Liners USA Tweco & Lincoln Style Liner42-3035-25 Mig Liners USA Tweco & Lincoln Style LinerView on Amazon
  6. 6WeldingCity Steel Conduit Liner 42-23-15WeldingCity Steel Conduit Liner 42-23-15View on Amazon
  7. 7WeldingCity Steel Conduit Liner 42-3035-15WeldingCity Steel Conduit Liner 42-3035-15View on Amazon

A liner that drags or jams turns a simple repair into a stop-start fight with the gun. The wire stutters, the arc goes uneven, and the bead shows it. This guide answers the steel vs nylon mig liner question for shop, farm and hobby work: which liner material suits the gun and the wire on the bench, and which of the liners below fits each common gun.

Other welders and gear to compare

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Steel vs Nylon MIG Liner: The Difference in One Paragraph

A steel liner in this guide runs the wire through a monocoil, spiral or spring-wire steel bore. The soft-bore side of this comparison is not nylon in these listings: the one listing that names a soft polymer liner names Teflon, a different polymer, and calls it ideal for soft wires such as aluminum and alloy. For daily steel wire work, the steel listings state the durability claims; for soft wire, the listing evidence here points to that Teflon conduit liner, not to nylon, which is not listed.

Side by side

Steel liner Nylon liner On the bench
Bore Monocoil, spiral or spring-wire steel No nylon liner listed Steel listings state the bore claims; Teflon is the listed soft bore, not nylon
Wire feed Steady feed stated for the PAZOGIK liners No nylon feed claim stated Feed claims are stated for the PAZOGIK liners, not for every liner here
Wear and heat Stated for the PAZOGIK liners; corrosion only for WeldingCity No heat or wear claim stated here Steel listings carry the durability claims
Soft wire One steel listing states its liner supports aluminum wire use No nylon claim stated; Teflon named for aluminum and alloy For aluminum, pick the Teflon liner the listing names for soft wire
Guns in this guide Miller M-series, Hobart H-series and Lincoln Magnum guns No nylon liner listed below Match the part number to the gun
Wire sizes listed 0.025 to 0.035 inch and 0.030 to 0.035 inch Stated per liner, not per material Size follows the liner, not the material name

Match the liner to the gun model and wire size in the listing, not to the material name alone. A liner listed for a Miller M-series gun is not listed for a Lincoln Magnum gun, even when the wire size matches. The WeldingCity listing says to refer to the MIG welding gun user manual for selection of the correct liner.

When a steel liner is the better choice

  • Daily steel wire work. The PAZOGIK 194011 listing states a monocoil steel bore with great abrasion resistance that prevents liner collapse and wire jamming, and a polished bore that reduces wire friction.
  • Long hours. The same listing states heat, wear and corrosion resistance for continuous welding, and a longer service life with less frequent replacement.
  • Corrosion. The WeldingCity listing states zinc plated spring wire to minimize corrosion on the metal surface.
  • Smooth feed on steel and flux-cored wire. The PAZOGIK KP1937-3 listing states a spiral steel structure that feeds wire smoothly and minimizes stuttering and jamming, and supports solid wire and flux-cored wire.

When a nylon liner is the better choice

No nylon liner appears among the 4 liners below, so no claim about nylon itself can be made from these listings. The soft-bore side of this comparison comes from the one listing that names a soft polymer liner: the WeldingCity listing states that its Teflon conduit liner is ideal for soft wires such as aluminum and alloy. Teflon is a different polymer from nylon, so that claim is not a claim about nylon.

  • Soft wire work, on the Teflon listing evidence only. Aluminum and alloy wire are the wires the Teflon conduit liner is named for in the listing, not wires a nylon liner is named for here.
  • No nylon feed claim. The listings state no feed claim for nylon, so feeding for a nylon liner cannot be compared here; the only soft-bore claim is the Teflon listing calling its liner ideal for soft wires.

The 4 liners in this guide, ranked

The liners below are ranked from the most complete listing to the least detailed. Each names the guns it fits, so the ranking turns on how much the listing states about build, fit and wire.

PAZOGIK 194011 MIG Gun Liner for Miller M-Series MIG Guns. A 15 ft monocoil steel liner for 0.030 to 0.035 inch wire, listed as an OEM direct fit for Miller M-series guns including the M-15 and Millermatic series. The listing states a polished bore for steady wire feed, less spatter and stable arcs, plus heat, wear and corrosion resistance for continuous welding. Its limit is fit: its listing names Miller guns only.

WeldingCity Steel Conduit Liner 194-011. A 15 ft steel liner for 0.030 to 0.035 inch wire, listed for Miller MIGmatic M-series guns and Hobart H-series H-9 and H-10 guns. The listing states zinc plated spring wire to minimize corrosion, and it is the one listing that also names a Teflon conduit liner for soft wires such as aluminum and alloy. Its stated limit is cosmetic: the conduit tube color may differ from shown.

PAZOGIK KP1937-3 MIG Liner for Lincoln Magnum Guns. A 15 ft spiral steel liner for 0.025 to 0.035 inch wire, listed for Lincoln Magnum 100L and Magnum PRO 100L and 175L guns. The listing states smooth wire feeding with less stuttering and jamming, heat and spatter resistance, and support for solid wire and flux-cored wire. Its limit is fit: its listing names Lincoln guns only.

Generic Replacement Lincoln Mig Liner KP1937-3. A liner for 0.025 to 0.035 inch wire, listed for Lincoln Magnum 100L and Magnum PRO 100L and 175L guns in a 1-PK pack. Its limit is detail: the listing states no material and no length, so it ranks last even though its gun fit matches the PAZOGIK Lincoln liner.

How to match a liner to a gun

Start with the gun model, then the wire size, then the length. The part number does the matching: 194011 marks the PAZOGIK Miller liner, 194-011 marks the WeldingCity Miller and Hobart liner, and KP1937-3 marks the Lincoln liners.

  • Gun model. Miller M-series and Millermatic guns take the 194011 liners; Hobart H-series H-9 and H-10 guns take the WeldingCity 194-011; Lincoln Magnum 100L and PRO 100L and 175L guns take the KP1937-3 liners.
  • Wire size. The Lincoln liners cover 0.025 to 0.035 inch wire, while the Miller and Hobart liners cover 0.030 to 0.035 inch wire.
  • Length. The PAZOGIK and WeldingCity listings state 15 ft; the Generic Lincoln listing states no length, so confirm length before ordering that one.
  • Manual check. Refer to the MIG welding gun user manual for selection of the correct liner, as the WeldingCity listing advises.

Feed trouble and hot metal. A liner that jams mid-bead leaves hot wire and spatter at the gun, so clear a jam with the gun pointed away from the body and the work area clear of flammables. Weld with ventilation and keep the head out of the plume, and wear safety glasses under the helmet when clearing wire or spatter.

FAQ for welders

Can a steel liner run aluminum wire?

The PAZOGIK 194011 listing states that its steel liner supports aluminum wire use. The WeldingCity listing adds a different option and names its Teflon conduit liner as ideal for soft wires such as aluminum and alloy. For regular aluminum work, pick the Teflon conduit liner the listing names for soft wire.

Do Miller and Lincoln liners swap?

Not according to these listings. The 194011 liners are listed for Miller M-series guns, and the KP1937-3 liners are listed for Lincoln Magnum guns. Match the part number to the gun model rather than matching wire size alone, since the wire ranges overlap.

What wire sizes do these liners cover?

The Lincoln liners cover 0.025 to 0.035 inch wire, and the Miller and Hobart liners cover 0.030 to 0.035 inch wire. Check the listing for the exact liner, since the WeldingCity listing also names other 194-series sizes for other wire ranges.

How long are the liners in this guide?

The PAZOGIK and WeldingCity listings state 15 ft. The Generic Lincoln listing states no length, so its length is not stated rather than assumed to match the others.

Does a nylon liner last as long as a steel liner?

No side-by-side life claim can be made from these listings, since no nylon liner is listed among them. The steel listings state wear and corrosion resistance and a longer service life.

Related: steel vs Teflon MIG liner, nylon vs Teflon MIG liner, 030 vs 035 MIG wire, best MIG welding wire, and best contact tips for MIG welder.

More buying guides