Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Siphon vs Gravity Feed Spray Gun: Which One Should You Buy?

Siphon feed and gravity feed spray guns move paint to the nozzle in different ways, and the feed type decides how the gun handles thick coatings, tight angles and cleanup.

Siphon vs Gravity Feed Spray Gun: Which One Should You Buy?
On this page

A fresh coat on a car panel, a cabinet door or a fence rail comes down to how paint reaches the nozzle. Siphon vs gravity feed spray gun is the choice that decides it: a siphon feed gun draws paint up from a cup below the gun, while a gravity feed gun lets paint fall from a cup above the gun. Every gun listed for this guide is a siphon feed gun, and no gravity feed gun is listed here, so this guide explains both feed types and compares the siphon feed guns below.

As an Amazon Associate I earn from qualifying purchases. This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Siphon vs Gravity Feed Spray Gun: How the Feed Works

A siphon feed gun, also called a suction feed gun, uses air passing through the gun to pull paint up from the cup below and push it out through the nozzle. The cup stays below the gun, so the cup can be large. All 4 guns in this guide are siphon feed guns with 1000cc cups, and the Throohills and PNTGREEN listings each name a stainless steel nozzle, while the CarBole listing names a stainless steel body with a brass nozzle. A gravity feed gun works the other way: the cup sits above the gun and paint falls to the nozzle, so the cup is usually smaller. The feed type changes how the gun is held and how much paint it carries.

Side by Side

Nozzle Cup Air supply
CarBole Suction Paint Spray-Gun with 1.3mm 1.7mm 2.0mm Fluid Tips | With 1000cc Aluminum Cup for Car Prime, Furniture Surface Spraying, Wall Painting 1.3mm, 1.7mm, 2.0mm 1000cc aluminum 7 to 12 CFM, 3 HP compressor
Throohills Siphon Feed Spray Gun for Piant with 1.8mm Nozzle, 1000cc Cup and 6pcs Paint Strainers for Cars & HousePainting Gun(Red) 1.8mm 1000cc Not stated
PNTGREEN HVLP Spray Gun Air Paint Sprayer Siphon Feed 1000CC Capacity, with 1.8mm Nozzle Professional Spray Guns for Painting Cars 1.8mm 1000cc 18 cfm at 3.45 bar (50 PSI)
ZHONG AN Professional Paint Spary Gun, High Pressure Siphon Feed Spray Gun with 1000cc Cup, Nozzle Tip Size 3.0mm for Automotive, Household and Furniture(3.0mm) 3.0mm 1000cc anti-drip Not stated

The table compares the 4 guns side by side, CarBole first. No gravity feed gun is listed here, so the table covers the siphon feed side only. The PNTGREEN gun lists air use of 18 cfm at 3.45 bar (50 PSI), above the 7 to 12 CFM range the CarBole listing states, and air supply is not stated for the Throohills and ZHONG AN guns.

When Siphon Feed Is the Better Choice

  • Large jobs. Fences, decks, cars and walls, where a 1000cc cup keeps the work moving.
  • Thick coatings. Basecoats and clearcoats, which the Throohills listing names, and the wide range the ZHONG AN listing states for its 3.0mm nozzle.
  • Work at any angle. The ZHONG AN listing states the gun holds suction at any angle with various fill levels and without spilling paint from the canister.
  • Primers and heavy material. The 3.0mm nozzle on the ZHONG AN gun suits heavy material, and the CarBole gun covers the same ground with its 2.0mm tip.

For cars and furniture, the best HVLP spray gun for automotive paint guide covers more guns for the same work.

When Gravity Feed Is the Better Choice

  • Small batches. Touch up work and small parts, where a 1000cc cup below the gun is more paint than the job needs.
  • Detail work. Tight corners and small panels, where a 1000cc cup below the gun is bulky and gets in the way.
  • Quick color changes. Small cups empty fast and rinse out fast, so swapping colors takes less paint and less time.
  • Light material at low air use. Thin material that needs little air.

The HVLP spray gun vs conventional spray gun guide explains how HVLP guns differ from conventional guns on air use and overspray.

The 4 Guns in This Guide

The guns below are listed in the same order as the table.

CarBole Suction Spray Gun, 3 Tips. The CarBole gun offers 3 nozzle sizes, 1.3mm, 1.7mm and 2.0mm, and 3 spray patterns, horizontal, vertical and round, set by turning the air cap. The maker lists a 1000cc aluminum cup, a stainless steel body with a brass nozzle, and a spray distance of 17 to 25 CM with a spray area of 35 CM. Air demand is stated as 7 to 12 CFM from a 3 HP compressor. The box holds the gun, the 1000cc cup, a spanner, 3 spray tips, a cleaning brush and a manual. Uses named include cars, furniture, fences, decks, walls and doors, and paints named include latex paints, enamels, primers, polyurethane, stain and varnish.

Throohills Siphon Feed Spray Gun 1.8mm. The Throohills gun pairs a 1.8mm stainless steel nozzle with a brass airflow cap that turns 360° to set the spray direction. The maker lists a 1000cc paint cup and a set that holds 6 paint strainers, a wrench and a cleaning kit. Uses named include basecoats, clearcoats and other high viscosity coatings, plus car painting, wall painting and furniture work. The handle is shaped for a comfortable grip.

PNTGREEN HVLP Siphon Feed Spray Gun 1.8mm. The PNTGREEN gun lists a 1.8mm stainless steel nozzle with a brass airflow cap that turns 360°, a 1000cc detachable suction feed cup, and 3 adjustment valves for liquid volume, air volume and spray range. Air figures are stated in full: 3.45 bar (50 PSI) and air use of 18 cfm through a 1/4 inch air inlet. The box holds the gun and a manual, and the maker notes that cleaning accessories and extra nozzles are not included. Uses named include automotive painting, household appliances, furniture, iron plate, aluminum and plastic.

ZHONG AN Siphon Feed Spray Gun 3.0mm. The ZHONG AN gun carries the largest nozzle here at 3.0mm, with a 1/4 inch air inlet and a 1000cc anti-drip canister that seals tight to cut cleanup and waste. Control knobs cover spray pattern, fluid control and air pressure, and the gun holds suction at any angle without spilling paint. Uses named include automotive, home and furniture work with oil-based or latex paints.

How to Tell Which Feed a Gun Uses

The 4 guns here all name siphon or suction feed in the product name. Then look at the cup: a siphon feed cup sits below the gun and the gun pulls paint up, while a gravity feed cup sits above the gun and paint falls to the nozzle. A listing that names a suction feed cup or a cup below the gun points to siphon feed.

Which Feed Should You Choose?

For cars, furniture, fences and walls, pick a siphon feed gun from this guide: the 1000cc cup covers large jobs, the nozzle range from 1.3mm to 3.0mm covers primers through clearcoats, and the air figures the CarBole and PNTGREEN listings state tell you the compressor to pair with those guns. Pick a gravity feed gun for small jobs where the cup must stay out of the way. The 4 guns here are all siphon feed, so the choice is which one fits the job: the CarBole gun for the widest nozzle range, the Throohills gun for the set with strainers, the PNTGREEN gun for full air figures, and the ZHONG AN gun for heavy material.

Paint fumes and overspray. Spray paint makes fumes and fine mist, so spray with ventilation or outdoors and wear a respirator rated for paint spray. Clear the area of anything flammable. See the welding respirator guide for respirator picks.

FAQ for welders

Can a siphon feed spray gun paint a car?

Yes. The listings here name car painting, basecoats and clearcoats. The 1.8mm nozzles suit basecoats and clearcoats, while the 2.0mm tip and the 3.0mm nozzle suit primers and heavier material.

What size compressor does a siphon feed spray gun need?

It depends on the gun. The CarBole listing states a 7 to 12 CFM supply from a 3 HP compressor, and the PNTGREEN listing states air use of 18 cfm at 3.45 bar (50 PSI). The Throohills and ZHONG AN listings state no air figures.

What nozzle size suits primer?

Use the largest tip the gun offers. The CarBole gun ships with 1.3mm, 1.7mm and 2.0mm tips, so the 2.0mm tip is the primer tip in that set. The ZHONG AN gun lists a 3.0mm nozzle for a wide range of water or oil based material, for primers and heavy coatings. The 1.8mm nozzles suit basecoats and clearcoats, which the Throohills listing names.

Can a siphon feed gun spray latex paint?

Yes. The CarBole listing names latex paints among the paints it sprays, along with enamels, primers, polyurethane, stain and varnish. The ZHONG AN listing names oil-based or latex paints for automotive, home and furniture work. Clean the gun right after the job so latex does not dry in the nozzle.

Why does a siphon feed gun lose suction?

Suction fails when air leaks into the paint path or the air supply falls short. Check that the 1000cc cup seals tight and that the compressor meets the 7 to 12 CFM range the CarBole listing states or the 18 cfm figure the PNTGREEN listing states. A clogged nozzle or a nearly empty cup can also break suction.

Related: HVLP spray gun kit, HVLP spray gun cleaning kit, inflatable paint booth, and the air compressor regulator and filter setup guide.

More buying guides